Windows Server 2008 R2 with Exchange of HDD replaceable hot backup?

Similar Questions

• Issue of license; need information on the purchase of Windows Server 2008 R2 with 25 CAL

  I am looking to buy Windows Server 2008 R2 with 25 CAL.  The question I ask myself, is that if I were to continue this RDS would come with the initial 25 CAL or it would cost more.  If so, how much per RDS? and how much would cost the package for the Windows Server 2008 R2 with 25 RDS CAL company.

  Thanks in advance

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can upgrade you Windows Server 2008 RC with SP2 to Windows Server R2 2012 with the option to upgrade?

  We currently have the server running Windows Server 2008 RC with Service Pack 2 installed. We want to upgrade to Windows Server R2 2012 with as little cost involved as possible. You can run the upgrade Windows 2012 Standard R2 of the disc on a Windows Server 2008 SP2 RC 64-bit environment?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Foundation of windows server 2008 comes with the fax server role?

  Foundation of windows server 2008 comes with the fax server role?

  Hello

  I suggest you to send your request from the link and check.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Users cannot use a smart card to log on a Server Terminal Services session on a computer that is running Windows Server 2008 R2 with SP1

  We have a Windows Server 2008 R2 with Sp1. There was the same exact problem in Windows Server 2008 (KB958596).

  When you use RDP or ICA (Citrix XenApp 6), smart card login prompt at random does not appear. When we close the RDP or ICA and make a new session of the guest of the smart card is here.

  Where can we get a fix, or a reg fix?

  Hotfix for Windows Server 2008 below...

  http://support.Microsoft.com/kb/958596

  In this scenario, users are unable to connect with their card chip and instead, he is invited for their usernames and passwords. If users don't provide these details, the Terminal Services session times out and disconnects.

  When this problem occurs, the option of smart card logon does not appear in the Terminal Services session. Users cannot connect by using their secret codes, and they must provide a user name and password. The option of smart card logon working again after that that they reconnect to the Terminal Services session one or more times

  Hello y2000max,

  Your windows server is beyond the scope of what is generally answered in these forums of consumers. I would recommend reposting among our public IT to Technet-Windows Server securityprofessionals. Thank you!

• SITE v2.0 failed Installation on Windows server 2008 R2 with SP1

  Installing CPID v2.0 on Windows server 2008 R2 with SP1, the Setup log reported that the installation failed with the error "CustomAction RollBackSccmComponents returned error code 1603"

  I run the Setup with this command after you open the command prompt as 'Run as administrator ':

  MsiExec.exe /i Dell_Client_Integration_Pack.msi

  I even put the command above into a batch file and run it with the same result. With the help of Trace32, I also found this error to be the main problem causing the failure of this facility:

  "custom action InstallSccmComponents unexpectedly closed the hInstall (type MSIHANDLE) handle provided. The custom action must be set to not close this handle.

  Autour Googling, I came across this link: http://en.community.dell.com/techcenter/enterprise-client/f/4448/t/19416814.aspx to try to perform the steps below, but when I did the steps below, the installation just rolled back without even beginning the installation:

  Steps in the link above:

  *********************************************************************************************************

  "We have found this to be a problem with the way that the custom action is running in the MSI file, it is executed in the context of the user who was unable, we changed this to run in the context of the system that solved the problem. To do is relatively simple;

  First unzip the files from the downloaded executable deployment package. Then, download Orca here, http://blogs.msdn.com/astebner/archive/2004/07/12/180792.aspx. Once installed Orca, do a right click Extract MSI and select, "Edit with Orca. Once Orca lance, do not panic, just click on the top menu and select, "Transform", then select "Transformation." Then go to the 'Custom Actions' Table on the left and find the "InstallSccmComponents" entry on the right; Change the value in the column "Type" 3073, then go to "transform", "Generate Transform", save the transformation in the same directory as your MSI and select, and then close Orca.

  To install, use the following command line;

  MsiExec.exe /i \Dell_Server_Deployment_Pack_v1.2_for_ConfigMgr_A01.msi TRANSFORMS =-number

  = The path to the directory containing the package deployment installation files and your STDS. »

  *****************************************************************************************************

  Has anyone seen this problem before? And if so, how to solve?

  Thank you

  TeeDarling77

  I found myself by opening a ticket with Dell to get this problem finally solved. After the installation of Dell's Support log shipping, they asked me to follow these steps below:

  1 if the SQL DB is on a separate machine, try to create the "SMS_TaskSequence_Action" class in WMI under \\.\root\sms\site_ >.  You can download WMI Explorer to browse if you want to see if this class already exists.  Run the script below will not hurt if it already exists.

  a. here are the instructions to create the custom class.  First open powershell as an administrator.

  b. set-executionpolicy RemoteSigned

  c. change the extension on the attached in .ps1 file and change the file to replace the "site_abc" by "site_their 3 letter site code.

  d. change the storage location of the ps1 file.

  e... \WMIClassAdd.ps1

  f. restart and try the installation again.

  3. If it still does not work, send me the newspaper install again to look at.

  Note:

  Here is what was in the attachment in step C.

  ****************************************************************************

  $newClass = ' new-Object System.Management.ManagementClass

  ("root\sms\site_abc", [String]: empty, $null);

  $newClass ["__CLASS"] = "SMS_TaskSequence_Action";

  $newClass.Qualifiers.Add ("Static", $true)

  $newClass.Put)

  *************************************************************************

  After you run the instructions above and restarted the server, installing v2.0 CPID ended successfully.

  I hope that these instructions will help someone in the future... :))

  TeeDarling77

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• RDP port not listening in Windows Server 2008 standard with Sp2

  Hi all

  I have Windows 2008 Server Std SP2 Domain Member Server...  Since week last sur-quartiers, am not able to take remote control of desktop... But I can't able to Ping on my network server... I have check the setting remotely on the server... It is activated... and also the desktop remotely (Terminal Services) service was launched with success...  I checked my firewall to network for blocking port (3389)... But there is not a lot of block in my network firewall... I also disabled windows firewall on my server... But still, I could not able to RDP... I have also checked my settings in domain GPOS and GPO Local for RDP block... But there is no such active parameters.  I did following the troubleshooting steps, but still the problem persists
  1 Telnet IP_serveur 3389
  Result: Failed to open connection to the host, on port 3389:
  2. netstat - n - a o | find "3389" (i run this command in my server RDP problem)
  Result: nothing displayed (port 3389 are not)
  3 I again & again restarted the server and the Terminal Server service, but there is still problem
  4.i change the RDP port only and restarted the service so that the server, but still problem exists
  5. I checked all RDP associated registry settings, everything is perfect
  Please help me solve this problem
  I need your urgent response precious
  Thanks in advance

  Hello Sheik

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Windows Server 2008 R2 with various OS Win interrupted network connections

  Not a question, but a finding:

  Shortly after the upgrade to Kaspersky Endpoint Protection 8, I started to have problems with seemingly random work stations in my area, the loss of their connection to one or the other of my boxes of Windows Server 2008 R2.  Some of the workstations XP SP3, some Win 7 - two BONES have been affected.  The breakdown of connectivity went both ways - the server could not see the workstation and vice versa.  Sometimes if I waited about an hour, the workstation could re-establish his connection spontaneously, but usually I have to change the IP address of the workstation.  Doing so systematically restored the connection.  Release and renew for workstations using DHCP didn't work because they always had the same new IP - address should change to restore the connection.  After a process of exhaustive and exhausting trial and error to determine the cause of this problem (I initially make the connection between the upgrade of Endpoint Protection and this question), I finally determined that the network attack blocker component was causing this problem.  I disabled this component during my assignment and did not have connectivity losses in the three months that I got that off item.  I also had a case when after the reactivation of network attack blocker, I got a workstation loses its connection to one of the servers, and after disabling the network trainer attack once again, work stations that had lost its connection almost immediately restored the connection itself.  So, if you are having this problem and use Kaspersky Endpoint Protection 8, disable the network attack blocker component.

  Hello

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated.

  You can also publish your solution or results in Windows Server 2008 R2 TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb310558

  Thank you.

• New hard drive fails on Windows Server 2008 VM with LSI Logic SAS SCSI controller

  When I try to add a new hard disk to a virtual computer with the cmdlet New-disk hard of a Windows Server 2008 virtual computer, I get the following error:

  New-hard drive: 18/01/2010-14:59:48 New-B8EDFDDF-ACF6-43AC-B111-51D332290FC7 hard drive for the entity vm-315 failed with the following message: "Number of virtual devices exceeds the maximum for a given controller."
  On line: 1 char: 13
  + new hard drive & lt; & lt; & lt; & lt; VM - $vm [5] - capacityKB 4194304
  + CategoryInfo: InvalidArgument: (vm - 315:String) , ViError
  + FullyQualifiedErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_OperationFailed, VMware.VimAutomation.Commands.NewHardDisk

  When assigning a different virtual machine, for example the parallel LSI Logic Controller, it is not a problem at all. When I add additional disks using the VI Client, there also no problem, regardless of the SCSI controller I use.

  Someone had this problem as well? Y at - it a known solution?

  Hi rengelen,

  I admit that I was pretty murky about when the fix will be available. The thing is that VMware has a policy that employees should not mention liberation time unless we are certain that we can keep his promise of 100%. Hence statemens as 'will be available in a future release.

• Windows Server 2008 R2, with two Windows Storage Server 2003 Standard: How can I add the MAC authentication on top of Active Directory authentication for a storage servers?

  I have two running Windows Storage Server 2003 storage servers in a domain R2 Windows Server 2008 Standard.  On top of the Active Directory authentication, I want to add authentication of MAC address for the access to one of the storage servers.  In this scenario, an authenticated user is unable to log on to the target storage server unless the user is also on one of the computers MAC address accepted.  All domain users will have access to other folders and files as configuration storage server in Active Directory.  I already have a user access to installation by the permissions for folders on the storage server target, but I still want to restrict access to specific computers as well.  For what it's worth the server hardware is HP Proliant DL360 G5 for the Standard Server 2008 R2 and server HP Proliant DL185 G5 for two Storage Server 2003 computers.  I don't want to have MAC address authentication as the main means of access control to the network, only for the storage server a as an addition to control Active Directory.

  Hi Kerry,

  The question you posted would be better suited in the TechNet Server Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us informed on the status of the issue.

• Problem with desktop experience in Windows Server 2008 R2 with SP2

  Hello

  I have uninstall desktop experience. Some how the server restarted before uninstallation could be completed. Now I'm trying to re - install desktop experience, but the error code is 0x8000FFFF, Catastropic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)). I tried several times but still the same error is coming. Used Microsoft Fifit. But still the same error is coming. I have server HP Storageworks 1600. Can you please let me know how I can install new desktop experience.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows server 2008 r2 outgoing smtp

  Hello

  I have a dell t300 running windows server 2008 R2. It is running Hyper-v, also manage a virtual machine running windows server 2008 r2 with exchange 2010 sp1.

  Everything was fine, then all of a sudden, over the weekend, outgoing calls to port 25 have stopped working on the virtual machine.  I can use Explorer (port 80) ok but nothing to the port 25 stops - it's as if the firewall blocks but I don't see where.  I try to call port 25 on various other hosts using telnet and it does NOT work

  The physical host works very well to port 25, as do all systems on my network, so the problem lies in the implementation of windows server 2008 r2 in the virtual machine somehow.  I have another virtual machine running windows XP on the same host and that is called fine ut using telnet to the virtual network bridge is not the problem either. I'm guessing that the firewall or a corruption of the tcp stack sort

  I ' LD be grateful for clues about where to look because email system has continued to send him and it's a major pain.

  Thank you

  Hi, Ive answered my own post!  turns out the problem be mcafee that is running on the server. It was blocking the outgoing mail that he had detected an apparent threat. Unfortunately, it didn't say clearly that he had done this.

  In any case, the deactivation of this area of mcafee has solved the problem. all I have to do now is to discover the threat!

• Services Terminal Server Windows Server 2008 R2 improved Configuration Error IE

  We have a Windows Server 2008 R2 with enhanced IE configuration set to off for all users on the Server Terminal Server services only.  The sessions of the Terminal services Server running Windows XP.  Whenever an end user clicks on Microsoft Outlook in a session, it executes an error from IE Configuration improved mentioning that the site needs to be added to the zone of confidence (subject: internet.)  Unfortunately, I do not know what url he speaks out.  I would like to know what precisely needs to be disabled in order to avoid the mistake of filling.  We have already defined group policy to disable this, but apparently not take after or gpupdate/force runs a logoff of connection occurred.  Of alternatives that anyone can give would be great.  Thank you very much.

  Nick

  This issue is beyond the scope of this site which is for the consumer to related issues.
  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I downloaded the Windows Server 2008 R2 SP1 180 trial version. How can I get the key?

  Hi, I want to install the Windows Server 2008 R2 SP1 180 trial version. I downloaded from:
  http://TechNet.Microsoft.com/en-us/evalcenter/ee175713.aspx

  but I don't have the key. How to register and get the key.

  Another question:
  Is it possible to install Windows Server 2008 R2 SP1 180 trial version as a virtual server on my Windows 7 Home premium version? If Yes, how can I do it, because it seems Windows 7 Home premium version do not support Windows Server 2008 R2 with SP1 as machine visualization.

  Thank you.

  Assessment of any version of the software Windows Server 2008 R2 SP1 does not require entering a product key.  Thus, no product key is issued.

  Q. "is it possible to install the Windows Server 2008 R2 with SP1 180 day trial version as a virtual server on my Windows 7 Home premium version?

  A. no, it is not supported.