Windows Server 2008 r2 "MMC Console has stopped working" error message
Hello
I am running Server 2008 r2 Service Pack 1.
It works internally since December 2013 without update.
After the update/patch a new image, or Server Manager or Microsoft Management Console features are accessible, I even tried opening the dialog box run GPEDIT. All the same error:
"The Microsoft Management Console stopped working.
A problem caused the blocking of the program works correctly. Please close the program. »
The only options are debug and close the program.
I did some research and found others who have the same problem in the past. It seems that an update for .NET 3.5 (KB2449742) was the source of the problem. After retiring people have stated that no other condition, however I have .NET 4.5 and this update is not yet listed in the "installed updates".
Before you give up and resort to a previous image and reinstall a number of new pieces of software, I hoped that there could be a simpler solution.
My only support tech, which normally I lean on for this kind of questions, is out of town for work and cannot help.
ANY HELP?
This issue is beyond the scope of this site and must be placed on Technet or MSDN
Tags: Windows
Similar Questions
-
applephotostreams.exe has stopped working error message
I get the following error message every time that I reboot - it started after MS Update on 23/08/2012:
IN MICROSOFT WINDOWS BOX:
applephotostreams.exe has stopped working error message - a problem caused blocking the program works correctly. Windows will close the program and notify yu if a solution is available
This is a link to the solution I found that worked for me...
-
I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?
Hello
Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.
Hope that helps!
Kind regards
Sheena
-
"Adobe Reader has stopped working" error message
Now, I get "Adobe Reader has stopped working" error message every time I open a PDF, image below. I don't know why this is happening, I had installed it for some time. I also uninstalled Adobe Reader and installed again and it still happens. Help, please!
Additional information - the PDF opens in fact, and I can see the document for a matter of seconds, after which the error message is displayed. Which is very annoying, because it looks like it works (in this sense, it will open the PDF) but then the error message is displayed.
Any suggestions on what I should do would be most appreciated, thanks in advance.
You can open Adobe Reader by itself? If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].
-
Windows Explorer has stopped working error message when I access my folder of snaps
Window #1:
Explorer Windows has stopped working.
Windows is looking for a solution.
Option: Cancel box
Window #2:
Explorer Windows restarts.
Option: Cancel box
Come this error message when I try to access my folder only snaps.
Please help me.
Hello
A few questions will help us better to solve your problem. Please answer these questions for us:
1. what operating system do you use?
2. what programs you have problems with?
3. is there an error message generated?
4. what type of file you go when this happens?
5 How long this issue is past?
6. is there anything changed/added/deleted before this issue popped up?
It's basically the who, what, when, where and why of troubleshooting.
Eddie B.
-
"Windows PowerShell has stopped working" error message popping up constantly
I get the error "Windows PowerShell has stopped working" message popping up constantly (several times per minute). This started after I restarted my laptop with nothing else running but the standard startup programs. How do I get this resolved?
The detail section of the problem shows the following:
Signature of the problem:
Problem event name: BEX
Application name: powershell.exe
Application version: 6.2.9200.16398
Application timestamp: 50338287
Fault Module name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 031cebc0
Exception code: c0000005
Exception data: 00000008
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtHi Kumar,
Thanks for your reply. It was caused by Poweliks.
What I did: reset the IE security (version 11) by default; Download the updated version of free version of Malwarebyte s in SafeMode with network connection; restored the system to the point before that he has been infected with the Poweliks (I got lucky that point to restore was not removed by the system yet); then re scan the entire PC in mode safe mode with networking. So far, nearly a week, the PC works fine and the Poweliks wish never to return.
Thanks for all members of the community to help.
Happy new year to all!
-Kevin
-
When I connect I get this error "Gteko Brkr Svcs application has stopped working" my screen will become gray before all load.
I can't find anything online about this. Can someone help me? Thank you!
Hello
1 did you changes to the software to the computer before the show?
Start the computer in safe mode and check if the problem persists or not, if the question does not persist then perform the clean boot and check whether the problem is resolved or not.
Was: start the computer in safe mode
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
Start your computer in SafeMode (Windows 7)
B: Perform the clean boot and check if the problem is resolved or not.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Note: perform step 7 to reset the computer to start as usual after the boot process.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Hope that helps.
-
WIN8 64bits - Recovery manager has stopped working error message
Hello world. Just bought a computer laptop 1310sa m6 with envy. I tried to create a rescue disk set by using the Recovery Manager. It does not start, just gives the error message "Recovery Manager has stopped working." and then informs me that windows is collecting information and inform me a solution... Being that this machine is only 2 days is a bit much that parties do not work, in my opinion, one most important parts who! Has anyone encountered this and y at - it a solution?
I tried to do a shadow with an O & O 7 disc image, works fine, but could not create a boot disk for a reason any (and Yes, I was using a 64-bit program!)
Any help and advice would be accepted with gratitude
JUST found the solution! DON'T bother with the HP Utility App Center. Go to search and type 'recover' and it will give you the option to create rescue disks... And it worked on my computer without any error message
-
Internet Explorer has stopped working (error message)
Internet Explore has stopped working, screen kept popping up this error message, what could be the problem, just bought my laptop three days ago thank you
Hello
Please join the errormessage, we may be able to resolve correctly.
Have you tried to switch to IE 9?
http://Windows.Microsoft.com/en-us/Internet-Explorer/downloads/IE
Kind regards
Joel
-
Toshiba Disc Creator has stopped working Error Message
I have a Toshiba Satellite P305D-S8834 and tried to burn a CD using Toshiba Disc Creator v.2.0.1.3. But I kept getting an error message saying "Toshiba Disc Creator has stopped working." and could not properly burn a CD. Although I contacted Toshiba support, I couldn't not useful information. Advice would be appreciated.
Try to remove and reinstall Disc Creator. Install the latest version from the Toshiba site.
Also update the BIOS and make sure you use quality such as TDK DVD discs. Disks unnamed wear easy and use of dye at low cost.
Also try to remove the UpperFilters and LowerFilters:
http://support.Microsoft.com/default.aspx?ID=314060 -
Ran cleaning, windows.old abducted have now explore has stopped working error BEX
Windows 7 32 bit
Signature of the problemBEX problem event nameExplorer.exe application nameVersion of the app 6.1.7601.17567App timestamp 4d6727a7Crash module StackHash_0a9eVersion of the module 0.0.0.0Fault module timestamp 00000000The 00000000 exception offsetException code c0000005Data of the exception 00000008Operating system version 6.1.7601.2.1.0.256.48Regional settings I would like 3081Etc.Occurs immediately after the connection and all I get is a black screen.Appreciate help to solve this problem.Tried all kinds of patches, but had to use to restore the old restore point. Back up and running then reinstalls all other updates since the last restore, some 94 updates point more IE 10.
-
On an attempt to install root CA certificate exported an AD MS area on a MS Windows Server standalone 2012 R2 Standard I get "Crypto Shell Extensions has stopped working" error message. The root CA certificate is valid for 25 years, I have no problem installing on my desk of MS Windows 7.
Then gets recorded in the Windows event log:
Bucket of error, type 0
Event name: APPCRASH
Answer: No available
Cabin ID: 0Signature of the problem:
P1: rundll32.exe_cryptext.dll
P2: 6.3.9600.17415
P3: 54504eb8
P4: ncryptprov.dll
P5: 6.3.9600.17415
P6: 545042f2
P7: c0000005
P8: 0000000000011b 85
P9:
P10:-
-
1001
4
0
0 x 80000000000000
1051
Application
vaultnv1
-
0
APPCRASH
Not available
0
Rundll32.exe_cryptext.dll
6.3.9600.17415
54504eb8
ncryptprov.dll
6.3.9600.17415
545042f2
c0000005
b 0000000000011, 85
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_rundll32.exe_cry_5e77194d83e64aae6bea8811e1e158fe8fa5e7a_f9f82d40_2157a85e
0
acb6030e-1D35-11e6-80BB-e41f13d540c8
2048
-----------------------------------------------------------------------------------------------------------------------------
The failing application name: rundll32.exe_cryptext.dll, version: 6.3.9600.17415, time stamp: 0x54504eb8
The failed module name: ncryptprov.dll, version: 6.3.9600.17415, time stamp: 0x545042f2
Exception code: 0xc0000005
Offset: 0x0000000000011b85
ID of the process failed: 0 x 828
Start time of application vulnerabilities: 0x01d1b142680ae27f
The failing application path: C:\Windows\system32\rundll32.exe
Path of the failing module: C:\Windows\system32\ncryptprov.dll
Report ID: acb6030e-1d35-11e6-80bb-e41f13d540c8
Faulting full name of the package:
ID of the failed package-parent application:-
-
1000
2
100
0 x 80000000000000
1050
Application
vaultnv1
-
Rundll32.exe_cryptext.dll
6.3.9600.17415
54504eb8
ncryptprov.dll
6.3.9600.17415
545042f2
c0000005
b 0000000000011, 85
828
01d1b142680ae27f
C:\Windows\system32\rundll32.exe
C:\Windows\system32\ncryptprov.dll
acb6030e-1D35-11e6-80BB-e41f13d540c8
Any help will be appreciated.
Thank you
Leo
They should be able to help you.
These forums are designed for home computer users.
See you soon.
-
Windows 7 Microsoft Management Console has stopped working
I am trying to open and print an element using AdobeReader, I updated my version of adobe in the last week or two. So, I'm pretty sure I have the latest version. When I looked for a solution for the following error message "Adobe Acrobat: AcroRd32.exe - Application Error" with the message "the instruction at 0x66882553c referenced memory at 0x0b6a4234. The memory could not be read. Click OK to complete the program"and was conducted to check my event viewer. I found this file on my computer and when I clicked it, I got an error message saying 'Microsoft Management Console has stopped working' and 'Windows is common for a Solution to the problem. However he never gave me a solution or even a propblem as possible. I investigated further on this site and found help advising me to open my services.msc in the start window and locate the event viewer. This is where my problem is that I can't locate event viewer in this particular window. Can someone help me?
Hello
- Remember to make changes before this problem?
Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link
-
Windows Explorer has stopped working error
Yesterday, I tried to install a program on my computer that is running windows vista after that the computer has stopped working. It starts go to the home screen and then the screen turns black with a white cursor you can move. I can start the Task Manager and the cmd mode. I can boot into safe mode only until I get the message windows explore has stopped working a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
I tried to boot to the last known good configuration, but that did not work. I think that the program has put the memory on the Board, but I'm still not a person of intermediate knowledge on this topic. We didn't backup our files and of course need them. Thank you
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.
I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3
PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.
The best way for me to trouble?
Hey punchcard4rjw,
Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.
If this does not work, you should look the article How to fix preferences that will not save.
Hope this helps!
Maybe you are looking for
-
How to open web pages in the same window
When I click on a link in a search engine it always opens the web page in a new tab. Its boring and I prefer mozilla to open it in the current page. How is that possible?
-
Hello I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port. However, when the customer starts using this image of the
-
How can I buy the windows half price 7 for my lap top? We bought a desktop with windows 7 6 weeks
-
Administrator account is disabled - system 5 error when trying to access
So I created a user account with administrator rights because I had problems with other accounts of user download of malware and viruses on my computer. Unfortunately, I've changed the password one night when I was very tired and now draws a complet
-
Add its icon in the notification bar
original title: assistance to the notification area How can I move the icon of his return to the notification area if it has disappeared from the hidden icon area?