Windows Server 2012 Foundation - installation of recovery DVDs - Activation question

Similar Questions

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• AUSST 4.0 on Windows Server 2012 R2 installation

  Hello

  I am installing AUSST on Windows Server 2012 R2 with IIS 8.5, although I can't get the thing to work!

  I followed the instructions to use the Adobe update (AUSST) server configuration tool if I do something wrong.

  All updates have been downloaded to the directory "c:\AdobeCloudUpdate" (a little more than 80 GB). I created a new web site in IIS to point to this directory as root and set the permissions to the local group 'IIS_USERS' read, list, etc.

  I followed the instructions to add the types of files for maps to the level of the server, changed the classic and set AppPool to update the 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\config\web.config' file with the veriables add path to 5 file types.

  When you try to access the "updaterfeed.xml" of a client computer using the full URL of the "http://co-au-01.contoso.msft/webfeed/oobe/aam20/win/updaterfeed.xml", I get a XML page cannot be displayed error.

  

  I created a file of substitution of "AdobeUpdater.xml" and added this to a new package is created in Packager CC and deployed just Photoshop and Office CC application. When I load the soft CC I get a download error when you try to view the applications.

  

  I tried to change other web.config files not found on the Server IIS ("C:\Windows\Microsoft.NET\Framework\v4.0.30319\config") and also the v2 of .net and .net v4 in the 'C:\Windows\Microsoft.NET\Framework64', but no joy.

  I hope it's a very simple solution and just miss a step but little help would be highly appreciated.

  Thanks in advance,

  
  Tom

  Something I've discovered here is that you need to add a wildcard on the VAC/services/FAC file MIME type (more precisely the validation file), because the files of validation is not an extension so he threw back a 404 error.

  

  I hope it suits it for you!

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• installation of windows server 2012

  I recently purchased windows server 2012, however, it came with a disc only. No instructions, nothing? How can I install on my Acer Aspire easyStore H342?

  Hello

  Thanks for posting your question in the Microsoft Community!

  After going through the description of your problem, it seems that needs clarification to install Windows Server 2012. I suggest you go through the followiong links.

  Installation of Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/jj134246

  Install and deploy Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/hh831620

  If you need assistance, I suggest you to ask your question in Windows Server 2012 TechNet Forum.

  http://TechNet.Microsoft.com/en-us/WindowsServer/hh534429

  I hope this helps!

• PowerEdge 1850 - installation of Windows Server 2012

  Hi guys, I have a Poweredge 1850 which I brought cheap on ebay, I use it as a NAS abit to free up space on my iMac and stream movies/music to my computer or via DLNA to my TV and PS3.  I am currently running Ubuntu that I kind of like/dislike, I also like to use my server as abit of a toy game project, and I like to try things, like using a webcam as a security camera which I can access when im etc.  I also use it to connect via ftp to and run Web etc pages.

  Now you know how I like to play with my server please can you help me :(  I want to try a new OS, I don't fear wipeing and start again as I can save on an external HARD drive.  I have a copy of Windows Server 2012 with I think that 30 days free and if I like it will activate.  When I boot from the CD, I get to the bit where it asks an installation location, but I can not find disks for select, I know I probably install the drivers I've tried (whether they are good or not, I don't know) my problem is they are .exe I can't load it as im on my mac:(-je n'avais pas ce problème de localisation deles de lecteurs quand j'ai installé Ubuntu) who find them without problem.

  Is it also possible to do this via VNC, I use remote on my server as I placed it in my garage.  Its abit of an effort to bring it inside more, she is rather noisy.

  A quick, someone could go through how to configure my drives in the bios, because I don't want to use RAID, I rather just have them as two discs rather than with her backup to another.

  Would be very grateful if you could help me with my "little" project (maybe we could both remote in and talk via Skype and do it together: D)

  Kind regards

  PriestyUK

  Yes, 2012 needs pilots, and the only way to get out them of the EXE is to run the EXE to extract the content (or use another tool for extraction).

  If you don't have a Windows machine (or you are not able to do it in a box of Linux/Mac), is not a virtual Windows machine that you can extract it, AND you have access to Server 2008 (not R2), then you can install it with this long enough to get the extracted driver, as pilots PERC 4 are from 2008 (but not later).

  Because Dell can't 2012 on 8G servers, you will need to use the drivers for Server 2008 R2:
  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/Poweredge-1850?driverId=9K3D3&osCode=WS8R2&FILEID=2731109791 (you need the 'hard drive' version)

  The RAID controller integrated to 1850 (PERC 4e/Si) does NOT support so no RAID, in order to use the disks individually, you must configure each disk in a single drive RAID 0.  An alternative would be to disable RAID entirely, that uses only the onboard SCSI controller.  The RAID cache will be more usable with RAID disabled well.

  You configure RAID in the CTRL-M (during POST) utility.  You disable RAID in BIOS (F2), in respect of the integrated devices (CTRL-M will not be accessible when disabled - you use CTRL-A to display the disks).

• Get a machine w / Windows Server 2012 R2 accessible Foundation on the network

  Everyone,

  I configured correctly (I think) a new computer that is running Windows Server 2012 R2 Foundation.  I would like to

  understand and carry out the steps or a link that will tell me how to make this machine available on the network.  The server is

  on a LAN connection and everyone in the office should be able to go in Solution Explorer and see the machine in network.  They

  currently impossible.

  Once they can see and double-click it, then the dialog box should come and ask for credentials.  I have the user ID

  and the password in place.  I just need to be able to get on the server.  Can someone, please, please help me go beyond this challenge?
  Thanks in advance.

  Jerry

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Installation of vmware tools windows server 2012

  I have to do something special to install vmware tools on a machine virtual windows server 2012, or just run d:\setup?

  Thank you.

  As long as it is the Fusion of 5 or above, just run the installation program.

  If Fusion 4, you may experience problems with the video driver that I don't see if Fusion 4 was never updated to officially support Windows 8 guests. In this case, however, if the only goal is to get something running, be sure to disable the video driver from the VMware Tools installation.

• Installation of Windows Server 2012 on Virtualbox

  I've used VirtualBox 4.2.12 to install Windows Server 2008 32 - bit edition, and it installed fine.
  However, when I try to install Windows Server 2012 64 - bit edition on my laptop, it comes up with an error, but on my desk, that's great!
  I allocated 2 GB of RAM and 64 GB of disk space.
  My laptop has 4 GB of RAM and 320 GB of disk space.
  This is the message I get after the progress bar:
  Error code: 0x0000001e
  The computer must restart
  Parameters:
  0xFFFFFFFF00000005
  0xFFFFF802C2970E0F
  0 x 000000000000000
  0xFFFFFFFFFFFFFFFF

  I tried:

  Updated the BIOS
  Updated graphics drivers
  Uninstall VirtualBox, then reinstall the virtual machine with disabled UAC and VBox

  It's an AMD Athlon x 2 dual core L310.

  Hello
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums
   
  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads

• Installation of Windows Server 2012 does not start

  Hello

  I am trying to install windows server 2012 I downloaded from my MSDN subscription.

  I'm installing on HP 8100 Convertiable minitower.

  Loading files, then when the windows icon it just restart the computer, and he in an endless loop of Windows startup.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Question: How can I format Ubuntu 10.10 on my machine for the installation of Windows Server 2012

  My machine is installed with Ubuntu 10.10 and together as a web server for a few months.

  Now, I need to totally remove the Ubuntu and install the large Windows Server 2012 RC.

  Easy steps?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Installation of Weblogic 10.3.6 with generic Setup on the SP2 of Windows Server 2012

  Hello Experts,

  I try to install WLS10.3.6 on MS Windows Server 2012 (64-bit) SP2 with generic Setup.

  1 installed jdk1.7 (jdk-7u80-windows - x 64)

  2. then ran wls1036_generic.jar

  C:\Program Files\Java\jdk1.7.0_80\bin > java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar

  Cannot create the temporary extraction directory in the default location.

  , I get the above error message. Attaching screenshot. http://www.use.com/FpC0P

  Can you please help?

  Thank you

  Benoit

  Just to update, finally ran wls1036_generic.jar. Problem was probably related to the virtual machine.

  We were in-

  C:\Java\jdk1.7.0_80\bin>Java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar

  Error - a

  Cannot create the temporary extraction directory in the default location.

  The temporary extraction directory is the Windows temporary folder. The location is-

  Folder - %USERPROFILE%\AppData\Local\Temp where %UserProfile% - c\:users\ [acctname]

  But when you run start > run > %Temp%, I see.

  C:\Users\ccbgso\AppData\Local\Temp\2--et error was a drive is not accessible.

  And \2 was the problem, because there is not C:\Users\ccbgso\AppData\Local\Temp\2.

  To correct this error, we did it-

  Start > run > Regedit > hkey_current_user > volatile environment

  And found 2 below.

  Chosen the 2, then the two TEMP & TMP sought in the right pane.

  the values were - C:\Users\ccbgso\AppData\Local\Temp\2

  Right-click each & click on modify, remove the \2

  Clicekd on ok.

  Disconnected and re connected.

  And then ran

  C:\Java\jdk1.7.0_80\bin>Java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar

  This time, he began the extraction and 'Install Oracle - Weblogic 10.3.6.0' Welcome screen appears.

  Thank you best regards &,.

  Benoit

• Installation of Windows Server 2012 problem

  I tried with different configurations, install Windows Server 2012 as operating system prompted but still got the error attached.
  Someone knows why?

  Hello and welcome to the communities.

  What version of VMware Player are you using?