Windows Server 2012 R2 RAS installation fails

Similar Questions

• Windows Server 2012 domain controller who fails to configure updates, coming back from changes.

  Hello

  I have a domain controller Windows Server 2012 which fails to configure updates. Each reboot it will say its configuration is updated, then in case of failure and Reverie. I can't find out what it is.

  I checked WindowsUpdate.log the only mistake I see there:

  2015 03-22 1000 1160 installation 09:36:29:735 caveat: SelfUpdate is in an error state

  Historical update check indicates a recent update that does not KB2770816:

  

  Download this update and install use autonomous to update manually the results of Setup in a message saying that the update is already installed (although windows search for the update in the updates installed appears without any results)

  I tried to launch the Windows update troubleshooting tool, that said he fixed a point, but after a reboot, I get always this error and now a new, every 20 seconds, I if I get this annoying modal popup saying that windows cannot check the updates even if it seems it can:

  

  Someone at - he counsel on how to locate the reason for the failure of the configuration of updates, perhaps, a log file will be useful information.

  Thank you.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Server 2012 Foundation - installation of recovery DVDs - Activation question

  Hi all

  Please could you help me with the following text:

  After the installation of Windows Server 2012 Foundation of Fujitsu Operating System Recovery DVD Fujitsu server activation does not work. Error code: 0xC004E003, Error Description: The Software Licensing Service reported that license evaluation failed.

  Thank you

  Ivo

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• 12 c install on Windows Server 2012 fails on creating user

  Hello

  Tried to install 12 c EE on Windows Server 2012 using the interactive Setup program.

  On step 8 of 13 in the Setup is the screen specify user Oracle home.

  I selected 'Create a new Windows user' and entered oracle as user name.

  Things seem to be process fine until she apparently didn't try to create the oracle user.

  An excerpt from the journal of the installActions.

  INFO: instantiating 'D:\app\oracle\product\12.1.0\devdb\bin\chopt.ini'. INFO: instantiating 'D:\app\oracle\product\12.1.0\devdb\bin\chopt.ini'. INFO: Calling Action WindowsActionLib12.0.0.0.0  AddInstallUserToGroup parentGroupName = USERS OracleHomeBin = D:\app\oracle\product\12.1.0\devdb\bin nodeList = null INFO: Calling Action WindowsActionLib12.0.0.0.0  CreateUser userName = oracle password = *Protected value, not to be logged* OracleHomeBin = D:\app\oracle\product\12.1.0\devdb\bin INFO: Exception thrown from action: CreateUser Exception Name: WindowsSecurityException Exception String: Failed to Create oracle Oracle Home User. Exception Severity: 0 INFO: Exception thrown from action: CreateUser Exception Name: WindowsSecurityException Exception String: Failed to Create oracle Oracle Home User. Exception Severity: 0 INFO: Calling Action w32RegActions10.2.0.1.0  RegSetValue selectedNodes = null Key = HKEY_LOCAL_MACHINE SubKey = SOFTWARE\ORACLE\KEY_OraDB12Home1 value = ORACLE_HOME_TYPE data = 1 updateType = null INFO: updating registry key 'HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/KEY_OraDB12Home1' INFO: updating registry key 'HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/KEY_OraDB12Home1' INFO: Calling Action WindowsActionLib12.0.0.0.0  CreateOSGroup groupName = ORA_INSTALL OracleHomeBin = D:\app\oracle\product\12.1.0\devdb\bin nodeList = null
  

  Thanks for all the recommendations.

  Morgan

  Solved!  It is the value of password that I have provided the Oracle installer to create the new user of windows.

  The value was acceptable for the oracle Installer, but was not acceptable for Windows as a valid password.

  A better password and installation continued.

  Morgan

• Windows Server 2012 with EFI fails to start after reset of HA

  The purpose of this thread:
  1. a solution, if anyone else has this problem.
  2. If someone has a better knowledge of why this happens or how avoid feel free to explain it please.

  The scenario:

  I was a new analysis a HBA via the Web Client (something I've done many times before in the non-Web client without any problem...) and loses connectivity to the ESXi host. No response from the ESXi at all and I've noticed a GROUP... That's fine for now...

  The biggest problem is that the VM on the failed host installs via HA to my other ESXi in the cluster, each of them has started normally except my 2012 server s. Just the Automatic Startup Repair Wizard has started, and I couldn't do much from there... I tried a few things auto repair, but they could not fill...

  So, I entered the command line tools and ran from diskpart. Discs not presented at all. That's where he hit that I use PVSCSI drivers for my 2012 s server so I was trying to understand how I could inject the command line, but I tried something else first...
  I started the virtual machine on the ISO 2012 server. Tried the option repair, no OS not found to fix, so I chose a new installation and loaded drivers PVSCSI pvscsi-floppy, interrupted the installation and tried the repair option again. He said something like "Continue to start Windows Server 2012" and viola! The VM rebooted successfully and started successfully in the operating system.

  All 3 2012 Server virtual machines on failure that esxi is affected. No Server 2008 or linux where affected machines but they do not use the pilot PVSCSI.

  
  Anyone has a solution alter or maybe an explanation why this happened? This will happen if HA into action on my server 2012 s?

  Is it possible to test or confirm without killing an ESXi host?

  I am running vSphere 5.5 and I don't think that I had this problem with 5.0 or 5.1, but I'm not 100% sure that cause I don't remember no matter which GROUP or another that are running older versions of the failure.

  Hardware version is 9, EFI boot.

  Thank you!

  Finally, I solved this... Looks like a mistake to the EFI initialization after reset of a HA. I know EFI is not supported by FT but I'm only using HA I can't find anywhere that it says that it should not work.

  This is how I fixed the corrupt WS2012 boots:

  1 boot WS2012 ISO, select new installation, load drivers PVSCSI, interrupt installation and choose repair. (Only needed if PVSCI-pilot helps you bootdisk)
  2. choose Help and then command Promt
  3. Run diskpart
  flight type list
  Locate the number of the partition-small FAT32 EFI, in my case nr 3
  Salt type flight 3

  type assign

  flight type list

  Choose the letter assigned, in my case E:
  Type exit

  4 cd /d e:\efi\microsoft\boot

  5 ren BCD BCD.bak

  6 bcdboot c:\windows/l en-us/s E: /f ALL

  7 bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Don't know if all these are necessary... However, it works. Note that the scanos and rebuildbcd show 0 found BONES.

  8 exit the command prompt and click on "Continue starting the server 2012" after that recharge should work properly again.

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• installation of windows server 2012

  I recently purchased windows server 2012, however, it came with a disc only. No instructions, nothing? How can I install on my Acer Aspire easyStore H342?

  Hello

  Thanks for posting your question in the Microsoft Community!

  After going through the description of your problem, it seems that needs clarification to install Windows Server 2012. I suggest you go through the followiong links.

  Installation of Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/jj134246

  Install and deploy Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/hh831620

  If you need assistance, I suggest you to ask your question in Windows Server 2012 TechNet Forum.

  http://TechNet.Microsoft.com/en-us/WindowsServer/hh534429

  I hope this helps!

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• PowerEdge 1850 - installation of Windows Server 2012

  Hi guys, I have a Poweredge 1850 which I brought cheap on ebay, I use it as a NAS abit to free up space on my iMac and stream movies/music to my computer or via DLNA to my TV and PS3.  I am currently running Ubuntu that I kind of like/dislike, I also like to use my server as abit of a toy game project, and I like to try things, like using a webcam as a security camera which I can access when im etc.  I also use it to connect via ftp to and run Web etc pages.

  Now you know how I like to play with my server please can you help me :(  I want to try a new OS, I don't fear wipeing and start again as I can save on an external HARD drive.  I have a copy of Windows Server 2012 with I think that 30 days free and if I like it will activate.  When I boot from the CD, I get to the bit where it asks an installation location, but I can not find disks for select, I know I probably install the drivers I've tried (whether they are good or not, I don't know) my problem is they are .exe I can't load it as im on my mac:(-je n'avais pas ce problème de localisation deles de lecteurs quand j'ai installé Ubuntu) who find them without problem.

  Is it also possible to do this via VNC, I use remote on my server as I placed it in my garage.  Its abit of an effort to bring it inside more, she is rather noisy.

  A quick, someone could go through how to configure my drives in the bios, because I don't want to use RAID, I rather just have them as two discs rather than with her backup to another.

  Would be very grateful if you could help me with my "little" project (maybe we could both remote in and talk via Skype and do it together: D)

  Kind regards

  PriestyUK

  Yes, 2012 needs pilots, and the only way to get out them of the EXE is to run the EXE to extract the content (or use another tool for extraction).

  If you don't have a Windows machine (or you are not able to do it in a box of Linux/Mac), is not a virtual Windows machine that you can extract it, AND you have access to Server 2008 (not R2), then you can install it with this long enough to get the extracted driver, as pilots PERC 4 are from 2008 (but not later).

  Because Dell can't 2012 on 8G servers, you will need to use the drivers for Server 2008 R2:
  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/Poweredge-1850?driverId=9K3D3&osCode=WS8R2&FILEID=2731109791 (you need the 'hard drive' version)

  The RAID controller integrated to 1850 (PERC 4e/Si) does NOT support so no RAID, in order to use the disks individually, you must configure each disk in a single drive RAID 0.  An alternative would be to disable RAID entirely, that uses only the onboard SCSI controller.  The RAID cache will be more usable with RAID disabled well.

  You configure RAID in the CTRL-M (during POST) utility.  You disable RAID in BIOS (F2), in respect of the integrated devices (CTRL-M will not be accessible when disabled - you use CTRL-A to display the disks).

• Installation of vmware tools windows server 2012

  I have to do something special to install vmware tools on a machine virtual windows server 2012, or just run d:\setup?

  Thank you.

  As long as it is the Fusion of 5 or above, just run the installation program.

  If Fusion 4, you may experience problems with the video driver that I don't see if Fusion 4 was never updated to officially support Windows 8 guests. In this case, however, if the only goal is to get something running, be sure to disable the video driver from the VMware Tools installation.

• Transformation of MSXML fails in Windows Server 2012 for adults

  I am transforming xml using the transformNodeToObject below method using VB Script:

  Dim oData
  Set oData = createobject ("MSXML2. DOMDocument.6.0")
  With oData
  . Async = False
  In the opposite case. LoadXML (DataNode) then alert "could not load DataNode.  "&. parseError.reason
  Ends with

  OTMPC Dim
  The value of OTMPC = createobject ("MSXML2.") DOMDocument.6.0")

  oData.transformNodeToObject style, the OTMPC

  I get the error in Windows Server 2012below.

  -2147024882 is not enough storage is available to complete this operation.

  This error occurs only in Windows Server 2012. The above code works fine with Windows 7 (MSXML). I noticed the name of the product of msxml6.dll in Windows 7 is MSXML 6.0 SP3 and Microsoft XML Core Services in Windows Server 2012. Also I noticed the Task Manager, it took more memory in Windows Server 2012.

  The above code works fine in all lower versions of the operating system except Windows Server 2012. Please give the solution for this.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Installation of Windows Server 2012 on Virtualbox

  I've used VirtualBox 4.2.12 to install Windows Server 2008 32 - bit edition, and it installed fine.
  However, when I try to install Windows Server 2012 64 - bit edition on my laptop, it comes up with an error, but on my desk, that's great!
  I allocated 2 GB of RAM and 64 GB of disk space.
  My laptop has 4 GB of RAM and 320 GB of disk space.
  This is the message I get after the progress bar:
  Error code: 0x0000001e
  The computer must restart
  Parameters:
  0xFFFFFFFF00000005
  0xFFFFF802C2970E0F
  0 x 000000000000000
  0xFFFFFFFFFFFFFFFF

  I tried:

  Updated the BIOS
  Updated graphics drivers
  Uninstall VirtualBox, then reinstall the virtual machine with disabled UAC and VBox

  It's an AMD Athlon x 2 dual core L310.

  Hello
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums
   
  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads

• Installation of Windows Server 2012 does not start

  Hello

  I am trying to install windows server 2012 I downloaded from my MSDN subscription.

  I'm installing on HP 8100 Convertiable minitower.

  Loading files, then when the windows icon it just restart the computer, and he in an endless loop of Windows startup.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Question: How can I format Ubuntu 10.10 on my machine for the installation of Windows Server 2012

  My machine is installed with Ubuntu 10.10 and together as a web server for a few months.

  Now, I need to totally remove the Ubuntu and install the large Windows Server 2012 RC.

  Easy steps?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/