Windows store is available in other Windows 8 and Windows RT operating systems?

Similar Questions

• Re: Serial number down would work with the other Windows Vista operating system

  First of all sorry for my English.
  I have one question.

  My hard drive is broken with my recovery partition.
  If I download windows vista and install the system with my original serial number on the laptop, this will work or should I activate it after installation.

  I hope it's the same number that the front is installed on my first installation.

  Hello Marcin

  I doubt that the serial number that is placed at the bottom of the device works with another Windows Vista operating system. But it s worth a try
  You could test it I heard it's very rare cases it was possible

  In any case, if your HARD disk is damaged and it of not possible to create a recovery DVD using recovery software Toshiba disc creator, then you must contact the ASP in your country for assistance.

  If the warranty is valid the HARD drive should be replaced just for free. If you need only the recovery DVDs, then you can order it here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Concerning

• How can I reformat my laptop with the Windows Vista operating system?

  Hello

  Please advise how I can do a reformat of my laptop which runs Windows Vista OS that I don't have the CD or DVD drive? normally it is preinstalled by the manufacturer. Thank you

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

  Hello

  I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Is there a practice of the Windows Server operating system environment?

  I'm looking to get some practice with the Windows Server operating system (2008 or other).  I came across the downloadable 180 trial period, but I don't mean to create a true server temporarily.  I'm looking to be able to have a completely 'virtual world' where I can actually add devices and simulate connect with different computers, etc.  I want to create an environment of virtual server completely, not the 180-day trial period where I create an environment that can have real computers to connect to it.  Such a thing exists?

  For example, I used a program called Packet Tracer that allows me to simulate the addition of routers, switches and high-end devices to create a whole network of Physics in a virtual environment.  I can configure devices with IP address and all that I can learn how to build a physical network.  I would like to do with the operating system Windows Server if possible.

  Thank you.

  Hello

  It would be preferable to repost the question to the Forum Windows Server help.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Setting up a Test environment

  http://TechNet.Microsoft.com/en-us/library/cc747673 (v = WS.10) .aspx

• You are able to use the CD of Windows Vista operating system on a laptop that has Windows 7 Home on it to use the Interface of Windows Vista?

  My situation is that I have a laptop that is a Windows 7 machine. I have a need where I'm considering purchasing a CD of Windows Vista operating system. It comes to be able to use the Interface of Windows Vista? I have a technical support of experience under my belt and I remember that if you need to have a different operating system available that you can use this operating system without installing it on your system.

  I really could use a version of Windows Vista now my educational purposes. My current computer has Windows 7 home running on it right now. Could you or someone give me Options to work with. I'll look forward to your response.

  Thank you

  Gary

  Q: "you are able to use the Windows Vista OS CD on a laptop that has Windows 7 Home above to use the Interface of Windows Vista?"

  A.  No.

• I can't backup DVD for Windows Vista operating system due to the error of 0x8007001B

  I can't finish a DVD upward on my Windows Vista operating system.  This is due to an 0x8007001B error code.  I was unable to complete the fix to services.msu

  Hi mine,

  This isn't a question of MSE - there is a problem with Vista or your computer or your software backup or your DVD player or its drivers or something else. We are not the right people to answer your question and give you the best possible options and solutions - you have to talk to the experts.

  Please repost at: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system?page=1&tab=all&tm=1304884961900 where specialists who understand and focus to help with these issues will be more than happy to help you.

  Although not my area of expertise (and you're welcome to ignore it and just after to the other forum), I did do research in any case and believe that the problem involves the corruption on your hard drive (although I could certainly be wrong - it is more likely to be the case if the full error message includes "drive cannot find sector requested" but you don't get the full error message, so I don't know). To try to fix it, if that is the problem, follow these steps:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If this does not work, test better clean your hard drive. To test your hard drive, check the manufacturer and try to diagnosis HD (http://www.carrona.org/hddiag.html) or this test: hard drive diagnostics tools and utilities (storage) - Corp of TACKtech (http://www.tacktech.com/display.cfm?ttid=287). If it passes the tests, there's probably nothing wrong with it and you must do to the other support forum. If it fails, which include in your post on the other forum and let them advise you how to proceed.

  I hope that the above solves the problem. If this isn't the case, I am confident, they can help you in the other forum, because that's what they specialize in. It would help if you posted the message Word for Word that is accurate and complete, including all codes. In addition, it would help them if you explain the difficulty you mention services involving (a link to the site where you found the solution or at least what exactly you did and what has happened or not happened when you tried). And if you've tried my suggestions above, include the results in your message (so they don't ask you to do it again and will be able to exclude).

  Good luck and best wishes!

• Do not open programs after installing Windows update operating system Windows Vista

  Original title: MS Office programs do not open after installation of Windows update to Windows Vista operating system

  After having decided to install the Windows Update my computer told me was available all my software as my programs MS Offfice is no longer open.  I don't know what to do.  The only thing that still works is the Windows Media Player.  I can't open Word or Excel, I can't access my photos.  Open Internet Explorer is like a weird nightmare but I am able to access the Internet.  I tried reinstalling my MS Office software, which did not work.  I have no idea what to do to solve the problem, but I need my computer back. It was good except for its slow, when I open certain programs, now I can't access something.  Any ideas what I should do to correct the nightmare?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For questions of office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• PNY attached 8 GB USB 2.0 Flash Drive recognized but does not work under the Windows 7 operating system

  I have an attached PNY 8 GB USB 2.0 Flash Drive that works perfectly on Windows XP. But when I try to use it on a Windows 7 operating system, it is very few recognized by Windows 7. I mean at least, is that when I look for the device by exploring 'Computer' in the menu start the device does not appear at ALL. However, when I go to control panel-> hardware and sound-> devices and printers, it shows a device called "DISK 2.0" which I believe are 'minimum' recognition of this 8GB flash drive, I was talking about. Can someone help me get the recognition for this camera on Windows 7? Thank you.

  Edit: I noticed in Device Manager-> USB MASS STORAGE DEVICE-> Propteries the following for my optical mouse Microsoft and the PNY 8 GB flash drive

  The Microsoft Optical mouse is the location: Port_ #0001.Hub_ #0004

  On the MagicJack (USB Composite device) is the location: Port_ #0002.Hub_ #0007

  On the flash drive is the location: 0000.001d.0002.002.000.000.000.000.000

  3rd place property looks pretty weird (Im assuming that third location data for the flash player, since the only other USB devices are my Microsft mouse and the MagicJack I know is a composite device, but I'm wrong.  AMD Athlon 64 3200 + 1GIG memory ATI Radeon X800XL 250gig W.D. hard drive

  An automatic Microsoft Windows update fixed my problem with this specific long ago PNY USB flash drive. It has been set at least the last 6 months or more.

• Windows 7 operating system the default backup files.

  where on my hard drive made the backup files of windows 7 operating system by default. I'm trying to recover the hard disk. help someone! I tried the disc cleanup and virus scan but still cannot recover the space.

  where on my hard drive made the backup files of windows 7 operating system by default. I'm trying to recover the hard disk. help someone! I tried the disc cleanup and virus scan but still cannot recover the space.

  Hello

  The most common place where you can find hidden files is in the folder System Volume Information . This is where all the files in System Restore are stored. These should be removed, occasionally.

  1. click on Start, type Cleanmgr.exe in the area ofResearch . In the results, click on Cleanmgr.exe right-click and select run as administrator option.

  2. in the Disk Cleanup Options dialog box, select the drive where Windows 7 is installed, and then click OK (usuallyC:).

  3. click OK to analyze the C: drive.

  4. Click to select one or all the files you want to delete.

  5. click the other Options tab. In the section System Restore and shadow copies , click the Clean Up button. In the confirmation window, click Remove. This will delete all but the most recent restore Point.

  6. click on OK.

  Let us know the results.

  Concerning

• How findout if all the partitions have been deleted and now a laptop that has Windows 8 operating system using Windows Vista with a shell IE 9?

  I bought a laptop broken at a friend's House. It is not used for the operating system windows 8 and wanted to use the Windows Vista operating system. Son of friends put in place this laptop for it, which was new when she bought in a retail store. Is there a way I can find out whether all the partitions have been deleted during the installation of Vista? I still see window 8 logo that I sign as an administrator user on this laptop.

  When I log on this computer, the previous owner of the screen name is the only one that appears. I go in Control Panel, click Add another account, then I see the screen name I posted. I could use the WiFi from my PC at home that Win 7 OS.

  When I started working with the laptop, I was able to bring control of the camera. Now I thought that the version that I use does not allow this operation. Be happy with any Positive help with my problems.

  Thank you

  Phil W.

  Hello

  Start > type CMD

  Right click on CMD and select run as administrator

  Type diskmgmt.msc

  Press enter

  This opens where you can view the partitions on the disk management system

  Who has installed Windows Vista, your son or friend?  Fact that they create a dual boot environment or reformat?

  http://www.technorms.com/8438/Windows-8-create-hard-drive-partition

  Multibooting requires separate partitions on the hard drive of your computer for each operating system.  To create and format a partition, see create and format a hard disk partition.

  To check if a dual boot system in place, start > Type msconfig

  Click on the Startup tab

  You see two operating systems listed?  Windows 8, Windows Vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/how-to-change-default-OS-for-dual-boot-system/

  I think that Windows 8 has the following partitions

  400 MB Partition Recovery (contains recovery information dated from before my upgrade)

  • 300 MB EFI System Partition
  • 350 MB Partition Recovery (contains information for recovery of my upgrade)
  • 17 GB Partition Recovery
  • 220 GB of Partition primary

  Windows Vista has drive C and drive D

  Done reformatting refers to a hard disk or partition that already has been formatted or that contains data on it. Reformatting a disk deletes all the data on the disk.

• Windows 8 operating system is compatible with a new Panasonic Toughbook 19?

  Windows 8 operating system is compatible with a new Panasonic Toughbook 19?  The sales representative is indicating that they do not have the COA available Win8.  Does this mean that I can buy the Toughbook 19 with the installed operating system Windows 7 and upgrade to OS Win8 one receiver time BUT does that mean the hardware is not compatible with the Win8 OS?

  Take a look at this page of Panasonic.  I think it should be OK for Windows 8, but has not yet been fully certified.

  Toughbook 19
  http://www.Panasonic.com/business/Toughbook/fully-rugged-laptop-Toughbook-19.asp?cm_mmc=PSCNA-_-vanities-_-Toughbook-19-_-TB-19-page

  "The Toughbook/Toughpad reasons does not meet these requirements of Windows 8 logo yet certified by Microsoft as being specialized PC.

  A specialist Microsoft Certified PC (SPC) is a system that has been designed for a vertical market with a special business use scenarios that has an explicit design must circumvent or remove features normally required by the certification. »

  http://Panasonic.NET/AVC/PC/SPC/

  See to it that the upgrade of Windows 8, said Assistant when you run on a Windows 7 computer.

  Download Upgrade Wizard at level
  http://go.Microsoft.com/fwlink/p/?LinkId=261871

  Upgrade to Windows 8
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

• Why I can't install iTunes on my laptop with the Window 10 operating system

  Why I can't install iTunes on my labtop with Window 10 operating system

  Have you downloaded the latest iTunes from here and correct version

  https://www.Apple.com/iTunes/

  and then run the downloaded installer.

• Desktop HP HPE h9-1150 Phoenix: can you do a update the BIOS of Windows 8 while on a Windows 10 operating system?

  As indicated in the title, you can do a BIOS in Windows 8 update while on a Windows 10 operating system?

  I have a Phoenix desktop h9-1150 and am trying to install a new GPU GTX970. There is no updated BIOS for Windows 10 at this time, but there is an update of my current BIOS 7.07 for Windows 8 OS. Can I do that Windows 8 updated safely?

  Normally the flasher will check to verify the operating system, but I can't on this one.  It does not separate out ROM file, even if it does not check if the operating system you can always extract the file BIOS and flash BACK.  I would try it first in windows.  It will tell you if there is a control in place.

• Windows XP operating system hangs at startup - Satellite P105

  Purchase my operating system would boot directly into windows.
  This Jolt Tech from HP does a remote that I could print wireless. He has changed the settings I had to fix, but the one I have now, I can't.

  When the computer starts now I get a host with:
  Please logon on to register your fingerprints.
  Press CTRL-Alt-Del for a long time on using password
  and
  SQL Server who say - could not find the instance name specified (MicrosoftBCM)
  Please specify the name of an existing instance on the invocation of Sqlservr.exe.
  If you think that you install is corrupt or has been tampered with uninstall then re-run Setup to correct this problem.

  I don't want to use the software of fingerprint with the above message, I don't like.
  I would like for my laptop to load directly in windows without login stuff.

  I tried to solve the problem of the Toshiba forum who proposed to change the settings in the fingerprints management system. I tried and it doesn't work.

  The parameters as follows:
  (1) do not Ctrl-Alt-Delete message (not verified)
  2) allow market security single sign-on (checked)
  ((3) allow the user quick switching of (unaudited) technical support system information: Satellite P105) with option of the fingerprint XP Professional (Service Pk 3), T-2500 CPU @ 2.00 GHZ
  Memory 2048 MB Ram Nvidia Geforce Go 7900 GS

  Pleas reply and let me know.
  Would the upgrade using Vista, my firefox internet keep gel where I have to restart a lot of connections.

  Would that Service Pack 3 or something else.

  Thank you
  Duvall

  Hello

  What model of laptop do you have? It is a series of portable US?

  By the way; If your computer laptop doesn t start correctly from the first day of purchase then why you n t use the Toshiba Recovery disk and reinstall the operating system?

• The Windows Vista operating system on dv9000 was arrested.

  The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

  How can I get my BONES restored without having to buy a new one?

  lbwhorms wrote:

  The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

  How can I get my BONES restored without having to buy a new one?

  You may need to contact HP in your region or Microsoft by phone.

  If he please go through these papers & try the above first steps:

  Activation of Windows Vista operating system

  You may be prompted to activate Windows Vista on a computer on which Windows Vista has already been activated by a license in Volume or OEM installation

  Concerning

  Visruth