Windows systems down

Similar Questions

• Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

  I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

  This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

  Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

• Windows shut down

  OK, you know how the computer automatically downloads new updates on your computer and tells you not to close your model while his weight so... well my comp has disabled in the process. now, whenever I go to turn on the computer it tells me that windows has been shut down... so I have recovery discs and they don't do a single thing for me... What do I do now?

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  In addition, if you come back in Vista:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Using the recovery disk:

  So good DVD of Vista, go into Setup/Bios to boot/market by pressing F2 or DEL depending on your computer, or you have F12 to go to the Start Menu and change is here and together DVD to be 1st in the boot order, restart with DVD in the drive, load files, delete the existing partition from Vista create the new partition, formatt, installation, etc.

  So good DVD of Vista, you have the option to do a startup repair.

  If Recovery DVD a manufacturer supplied with the computer, or you have one, follow the signs to restart via the same method of boot above order.

  Mick Murphy - Microsoft partner

• How to solve the "HKEY_LOCAL_MACHINE Windows Search\Gather\Windows\System Index missing or invalid" error message

  'HKEY_LOCAL_MACHINE Windows Search\Gather\Windows\System Index missing or invalid' error message appears after each Norton Utilities scan.

  The problem is that IE frequently slows down or blocks, the Task Manager shows the CPU clocked at 100% the problem will clear for 5-10 minutes.

  I am running Windows XP Home Edition with Norton Utilities; Norton Antivirus; Advance system care and Super AntiSpyware as my software security.

  Anyone had any chance to solve this problem?

  Thank you

  Richard Boyer

  Hello

   

  ·         Is your update of the antivirus program?

  ·         Were there recent changes made on the computer before the show?

   

  Follow these steps and check if that helps.

   

  Step 1:

  As you receive the error message when you use Norton, I suggest you to contact Norton support:

  http://us.Norton.com/support/index.jsp

  Step 2:

  I suggest you run this Microsoft Fixit tool and check if it helps.

  Solve Internet Explorer add-on problems when IE hangs or freezes

  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us

  You can also view this article to improve the performance of Internet Explorer and check if it helps.

  Internet Explorer is slow? 5 things to try

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• root of Windows System 32 ntosknl exe

  the son got a new laptop for Christmas and took his old of all records but now when I try to start the old place it says it's missing (windows 32 exe ntosknl root system) any ideas were I get this to replace. I had to go through the ghost system down at this stage of taking things he does what ever

  Thank you got sorted when I put a bit of thought into it, when I got the up norton ghost, I put it to the factory configuration file was missing so used the ghost to go to a restore point and it made me the return file

• help w / this error code __Runtime error__Program C: windows \system 32\spoolsv.exe

  Runtime error
  Program C: windows \system 32\spoolsv.exeHi,

  I am a newbie so please be easy on me
  I can't install my printer, lexmark could not help w / this error. any help is greatly appreciated. Thank you

  Hello Ilucas7,

  Thank you for your message.  We will first of all make sure that the Spoolsv.exe is not corrupted.  Please follow the steps below:
  Click 'Start' > type cmd in the text field and press [Enter]
  In the command prompt, type sfc/scannow , and then press [Enter]
  The current action is called System File Checker, it will scan your system for files in the damaged bone and repair them.
  
  
  After the System File Checker has run its course, please reboot your computer.
  Now, let's make sure the spool service is started on your system.
  Click 'Start' > right click on 'Computer' > select 'manage '.
  Expand "Services and Applications" > highlight "Services".
  Double-click the "Remote procedure call" service and ensure that it starts.
  If it isn't, use the pull down to set the startup type to "Automatic" and click on 'Start' > click OK
  Double-click the "Print spooler" service and ensure that it starts.
  If it isn't, use the pull down to set the startup type to "Automatic" and click on 'Start' > click OK
  
  
  After you be sure that the services are running properly you can try to reinstall your printer.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• FF running as a regular user (not administrator) on Windows. 34 FF window goes down unexpectedly when adding a tab or resizing of the window. At OK w / FF 17

  I resize window FF or add/remove a tab. The whole window moves down.

  A nailed by starting in safe mode. Due to the extension of Client light Wyse Dell.

• I see more 'open with' option in the window to down load after clicking on "do this automatically for files like this. How can I return it?

  I can't see the option 'Open with' window load down after clicking on "do this automatically for files like this. How can I go back in order to have the ability to open or save the file again?
  I have Windows Vista and Firefox 19.0.2
  Thank you.

  Hello, you can change the default action for certain types of files in firefox > options > applications.

  Nominating Committee - define how Firefox handles different file types

• Noise - HHCTRL. OCX occupied an address box reserved for Windows system DLLS

  OK so I have a satellite phone and since yesterday, whenever I turn on my laptop, I get this message: -.

  RTHDCPL. EXE - repositioning of unauthorized system DLL
  DLL user32.dll system was moved in memory. The application will not work correctly. The move took place because the DLL C:\WINDOWS\system32\HHCTRL. OCX occupied an address box reserved for Windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL

  So, I sat like 1 million bulletin boards etc. and not got anywhere. I'm normally ok with computers, but this time I confess that I have not the slightest idea what to do. It of really bugging me, can anyone help? Some message boards have taken me to a link on the Microsoft Web site to download something, but it says you must have windows XP service pack 2 and honestly, I have no idea and do not want to download something to totally screw up my laptop! (ok, maybe I'm not very good with computers!) Also, I found a site telling me something to do but I had no idea where to go or anything! I need someone to tell me EXACTLY what to do to get rid of this really annoying message. Also some sites say that when you press 'OK' another message appears, mine isn't it just goes!
  Please help, has soon x

  Please do not post new discussions on the topic that were discussed here in the forum. I always recommend looking before opening the new thread.

  Then please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  This problem occurs because Microsoft released a new patch for the closure of a breach of security in Windows Internet Explorer.
  But this patch has a bad influence on the Realtek audio chip.
  That's why Microsoft has released a patch to fix the old fix. ;)

• Recover Windows System Image in Boot Camp 10

  Hi all

  I have problems with Windows on my iMac.

  So I installed Win10 using the Boot Camp Assistant, partitioning 300 GB for it. After awhile, I realized I want to segment much more, so I tried looking for a way to extend this partition to 500 GB - I have tried it with a 3rd party app and didn't. I then created a Windows System Image, restored the fuser unit to a single OS X partition and reinstalled Windows with BCA - by then I had decided to partition 1 TB for each operating system. I installed with no problems and tried to recover Windows from the Image of the above system. But instead he apparently formatted my entire SDS, including the OS X partition, that the iMac will not start and more.

  [I have a backup Time Machine and everything, I also know I have to reinstall OS X and then restore from that backup.]

  The question is how to do what I tried bypassing Windows format the whole * thing. If this is not possible at all to recover from the image, I'll be forced to 'start from scratch' and I'd really rather not, 3rd party applications are welcome at this stage. Also, can I recover the files from the Image of the system?

  Thank you for your time,

  Bruncky

  PS. : Given that the Apple employee didn't know immediately what I was talking about: in Windows, a System Image is a 1:1 copy of my Windows partition around, as opposed to a backup that saves only files apps and not content generated by the app.

  PS2. : If I reinstall OS X from Recovery Mode, do I make specific configurations about the merger by car?

  BrunoBrunck wrote:

  But instead he apparently formatted my entire SDS, including the OS X partition, that the iMac will not start and more.

  This issue arises from a bad assumption made during the restorations by the process of restoration of Windows. It assumes that the restoration is made on the dedicated disk that has nothing else. Winclone is the best solution on Mac instead of Windows System Image backups. I have some time with a few users and I have tried with different levels of success. Please see Bootcamp not recognized after the restoration of Windows from image system for example.

  The question is how to do what I tried bypassing Windows format the whole * thing. If this is not possible at all to recover from the image, I'll be forced to 'start from scratch' and I'd really rather not, 3rd party applications are welcome at this stage.

  Try of Winclone.

  PS. : Given that the Apple employee didn't know immediately what I was talking about: in Windows, a System Image is a 1:1 copy of my Windows partition around, as opposed to a backup that saves only files apps and not content generated by the app.

  There may be some confusion between the Image of the system and the history of the files. Time Machine has no concept of an Image of the system, so it is also the terminology 'exotic '.

  PS2. : If I reinstall OS X from Recovery Mode, do I make specific configurations about the merger by car?

  No, unless you have built a custom Fusion car. If you have a Bootcamp partition on the drive of Fusion, you want to ensure that you're not crushing BC/Windows, unless a wipe/restoration is your goal.

• labview 6.1 with windows system error 7

  I use vi Labview 6.1 to control an oscilloscope Tektronic and a universal pulse BNC via GPIB-USP connection generator. The vi worked very well with the windows XP system. The system was changed to Windows 7. Then the error (Trigger signal is not recognized. Check the connection between "Trigger out" and "at the ins') comes every time I started running vi. The link between "Trigger out" and "at the ins' works under mannual mode, so it's really ok.

  Compatibility between Labview 6.1 and windows 7 would be the reason? If so, are there tips for using Labview 6.1 on windows 7?  Thank you.

  Thanks for your help.

  The solution turns out to be very simple... The new Windows system is the German version so that the old windows English version.           , is used for decimal in German instead of .

  Thank you all!

• Repair Windows system is available on a disc of Windows 7 HP system recovery

  Repair of Windows systems is available on the disk HP System Recovery DVD for Windows 7 and if so how I find the disk? I was looking for Windows Bootrec.exe!

  Hello:

  No, it isn't.

  Simply make your own drive of W7 installation/repair by downloading the file from W7 ISO applicable from the link below for the version of W7 you have.  Use the files in the list update to SP1 Media.

  dows-7-Digital-River-direct-links-Multiple-Languag http://forums.mydigitallife.info/threads/14709-win...

  You can then use this tool to transfer the ISO on a DVD or 4 GB USB key file.  The tool also performs the bootable media.

  http://www.microsoftstore.com/store/msusa/HTML/pbP age. Help_Win7_usbdvd_dwnTool

  Start on the W7 installation screen, and then on the lower left side of the window "Install now", you will see the repair option.

• What laptopi marketing get this time ewery on screen; dll c:window\system\spool\divers\x64\lxcf. missing entry @16

  Hi when I start my laptot get this time on screen, c:window\system\spool\driver\x64\3lxcf time.dll ewry. lack of entry_run dllentry@16 it please can someone tell me what it is regarding

  This DLL (for example, Dynamic Link Library) would have to do with a dynamic timer in your Lexmark printer software. The Lexmark printer software is configured to load each time that you start the computer, so when Windows starts, this error occurs.

  First of all, I would like to see if the Lexmark Support site has an update for your printer software. If no update is available, the original software and reinstall it. Who would recreate the DLL registration and should solve your problems.

• C:\WINDOWS\SYSTEM\VMM32 file is damaged on the Windows ME startup

  Original title: C:\WINDOWS\SYSTEM\VMM32

  I'm after start on my spare charge of problems with Windows ME computer, and now starting will not continue beyond a message which States that the following file is corrupted C:\WINDOWS\SYTEM\VMM32. Also, I don't have a key-on this computer. Help please. John.

  Hi John and ME,

  Unfortunately, Windows Millennium Edition has become an obsolete product and Microsoft has stopped supporting the product.

  For more information, you can consult the following articles:

  End of support for Windows 98, Windows Me and Windows XP Service Pack 1

  Support for Windows Millennium Edition

  However, you can try these steps and see if it helps.

  Step 1:

  You can try to start in safe mode and check if the problem occurs.

  Check this link for more information on starting your computer in safe mode:

  A description of the options to start in Windows XP Mode

  Step 2:

  If you can boot into safe mode without any problem, and then try to perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows to start normally.

  Hope this information is useful.