Windows shut down

Similar Questions

• startup message... Windows shut down to avoid damage

  locked system, when the previous stop, had to press the power button / stop... on said boot messages Windows has shut down to prevent damage to the computer, at the bottom of the screen, it says disable the driver and then update driver - says to disable the following driver: kdcom.dll - address F967115E to F9670000 database.  4e408293 datestamp.

  I also tried a restore of the system several times and received the same message at startup.  I will try to disable Norton as noted during my research of the problem and try another restore of the system.

  Here there is a self-diagnostic and repair on windows updates - I don't know what caused the problem, where/what it is; or how to fix it.

  Hi Marty,

  ·         Have you checked the problem in safe mode?

  ·         The computer starts finally on the desktop?

  Method 1: Try to start in last known good Configuration advanced startup options.

  Method 2: If you are able to boot to the desktop, you can update the computer with the latest chipset drivers. Also, update the other drivers for devices such as graphics, sounds etc. Log on the computer manufacturer site to do.

  Reply with the results.

• WD My Passport essential se, when I open the software, windows shut down program. error 47

  HP TX2117 VISTA, works on Windows 7 laptop.

  Hi glenn3135

  
  Code 47 States that Windows cannot use this hardware device because it has been developed to remove safely, but it has not been removed from the computer.

  
  This error code only occurs if you used the request for withdrawal safely to prepare the device for removal, or pressed a physical eject button. You can use the methods and check them off below if the problem is solved-

  Method 1 :
  You can disconnect this device from the computer and then connect again then check.

  Method 2:
  Make sure that the device is properly connected to your computer, and then restart your computer. Click Start, click shut down, and then select restart in the Shut down Windows dialog box to restart the computer. Check to see if the problem resolves.

   

  I hope this helps.

• Wireless use USB ports locks and prevents the Windows shut down

  Hi all. Faced with this one.

  Computer is the laptop, HP Pavilion DM4 - 1150ca. 4 GB of Ram, 150 GB HD

  OS Win 7 Home Premium 64-bit, SP1 and latest updates installed

  Problem: I have 3 ways to connect to the internet: 1 Dongle USB (Device Manager calls "Remote NDIS based internet device for sharing". No problem connecting to the network and to the internet with this device. 2. built in WiFi adapter, "Intel Centrino Wireless - N 1000 and 3. External antenna for high power USB and USB «Realtek RTL8187» adapter Medium 1 and 2, I can normally connect to the network, get decent speed but he declines quickly and then to a random period, usually within a few minutes, I lose my internet connection, and finally my network shows disconnect icon. At this stage all 3 of my USB ports are locked up, removal of the WiFi device does nothing, don't disconnect sound and no USB device is recognized if I try their connection. In addition, Windows will not stop. I get a "shutting down" screen but it stays that way until the expiration time and finally restarts, screen asking if I want to start normally or in safe mode.

  Action taken:

  Several online sites checked and tried solutions including:

  RTL8187 uninstalled and reinstalled several times

  Uninstalled and reinstalled HP wireless several times

  Deleted (Device Manager, see all) entries while grayed, unused network

  So far, no joy, no change. Anyone have any new ideas? Thanks for any help

  Hi Raven,

  Do you have third-party security programs installed on the computer?

  Basically, if the internet works in safe mode and not works in normal mode, not applications or third-party security programs can be in conflict with the drivers from the internet.

  As a solution, I suggest to uninstall the anti-virus program and check if it works in normal mode.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Answer with the results so that we can help you even the question.

• BING 'BOOKMARKS' stop working, now WINDOWS shut down

  Yesterday, the BOOKMARKS stop working today, sudden closure of WINDOWS Vista Edition full. Weather was stormy a few hours earlier, clear now. Core temperature is OK; AMD processor. Any ideas what's happening?

  Hello

  You say Windows close. but you don't say if you have managed to restart Windows, or not

  See if this helps you, if you cannot boot into Windows...

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Windows shut down Hello.

  Given that I have installed Explorer 9 Windows was Hello stop. Windows Firewall is enabled and Hello is allowed. I can restart Hello, but Windows will usually close within a period of 12 hours.

  Hello
   
  • It happens with Hello?
  • If it works well before?
   
  I suggest you to contact Apple about this issue:
  http://www.Apple.com/support/Bonjour/  

• WINDOWS SHUT DOWNS

  After dozens of errors, windowS has closed unexpectedly, reformatted the whole drive and system. 1st error: WMI reverse Performance adapter Maintenance Utility, can I fix this, what is it >

  Hello

  · When you get this error message?

  · What are the other error messages that you get?

  Step 1:

  You can check what is the origin of the error message; You can check which is event viewer. To open the event viewer follow the link below.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Access the Application

  Article and find all the error messages concerning WMIADAP. EXE which should give you the cause of the error.

  Step 2:

  You can also configure your computer in shape of boot is a way to indicate the application is causing the problem. To set up its own start-up follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My new laptop Acer has locked up on the message "preparing to set up Windows shut down your computer.

  Help, please!

  To allow us to help you better, please provide as much detail as possible about the problem you are experiencing.

  
  If you design your question effectively, you can get good information from people who are familiar with the subject and who are happy to help you.

  Prepare your question. He thinks through. Hasty-survey questions get hasty responses, or none at all.

  What diagnosis have so far

  An effective question you will get help read faster how here

  Suggestions for asking for help on a site.
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Get the blue screen error saying windows has shut down to prevent damage to this computer

  My sons computer is BLUE with a message saying that windows was arrested for not to damage your computer. And it is stuck on that screen. Do you know why windows shuts down his computer?

  * original title - my son computer is blue and a message indicating that windows has stopped to avoid damaging his computer. And he is not able to do anything. Do you know what it is? *

  Hello

  1. what operating system is installed on his computer?
  2 did you the hardware changes to his computer before the question?

  Perform the steps in the article and see if the problem is resolved or not.
   

  Resolve stop (blue screen) error in Windows 7

  Also check the event viewer for error logs

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)?

• Blue error screen that says windows has been shut down to avoid damage.

  Help, please. We have an office that works under windows xp and we receive a blue screen error message. I need help running system restore because it does not run windows if it keep windows shut down and leaving me with a blue screen error message.

  We need to know what the Blue error screen and if it referred to specific files and/or numbers. Also, please include a description of your computer and its recent history.

  http://www.Aumha.org/win5/kbestop.htm - Stop errors

  MS - MVP - Elephant Boy computers - don't panic!

• Laptop shuts down without warning

  Hello

  I have a laptop - HP Pavilion Sleekbook 15-b000ej with Windows 8.

  Recently, she stops without warning, but only when working on the battery. Although I guess the battery is old and I need to get a new - I don't understand, is why the laptop stops instead of going to hibernation. I checked the power settings. It is supposed to never closed, but go into hibernation, but it never does.

  So is it the battery or something else?

  Thank you.

  Hello

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing due to shutdown of Windows problem. I will definitely help you.

  This problem may occur because of corrupted or incorrect power settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control. Please follow these steps:

  a. press Windows + C keys together, and then click Search.
  b. type Troubleshooting in the search box and click on it in the search results.
  c. click on "display all" and then click "Power".
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Please see suggestions of Kate Li and marked as answer kelvin_hsu, Microsoft of contingent personnel, Moderator on January 27, 2014.
  https://social.technet.Microsoft.com/forums/Windows/en-us/3149cdae-21ee-4B2A-9321-5d4841e1c24b/Windows-shuts-down-instead-of-hibernation?Forum=w8itprogeneral

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Suggestion: Firefox would not hold up to a shut down windows with a close multiple tab dialog box.

  I didn't know where to send a suggestions, so he posts here. Please redirect it to the appropriate location.

  When I shut down windows and firefox works with several tabs, it pops up a dialog box and prevents the closure of windows. Last Friday, I shut the computer down before leaving work and found that it was still on when I went back to work Monday. Reason - Firefox.

  I prefer computers stop when I am away for an extended period of time to save energy.

  Tools > Options > tabs: [] "warn me when closing multiple tabs".

• Cannot shut down Windows XP properly.

  I have a portable satellite 1110. I am facing a problem then the closure of the system. When I try to stop the system hangs on the blue screen saying "closing windows. I have to manually shut down the system.
  Any help on this would be appreciated.

  Hi Roohbir,

  It is very difficult to say EAL is causing your problem since there are so many causes to consider. However, you may find it useful to read the following article. Just enter "Shutdown problems" in the search box.

  http://aumha.org/KB.htm

  HTH

• Satellite L40 - 14N: problem has been detected and windows has been shut down

  Help.

  My laptop worked perfectly well until my son used last night and went on various games.
  Since then when you turn it on, it is a blue screen that says: "a problem has been detected and windows has shut down to prevent damage to your computer.

  He said that he has downloaded something or added a new hardware or software.
  So, off it and tried.
  Have tried everything to make it work. tried to get into F8 and F12.

  Tried from the safe mode and the recovery disc tried following all the resulting instructions always blue screen.
  Not knowing what else to do. I have

  s he Knackared now?

  As I got the BSOD appears also after the use of the disk recovery and after a fresh install of the OS.
  Is this right?

  Unfortunately, buddy, but sounds more like a hardware problem as a problem related to sound.

  I would contact a technician for laptop and organize an audit of the material.

• HP pavilion n003tx: MY HP laptop does not shut down properly after installing windows 10

  My HP laptop worked perfectly with windows 8.1. After the upgrade to windows 10 is not shut down properly. Power and wireless signals is always bright and also consumes the battery.  I need to press the button for at least 4 seconds power in order to stop completely.

  Is there any possibility to get rid of this problem

  Spoiler (Highlight to read)

  

  

  When I disabled the quick start in power options > it works very well with a certain delay before start-up