Windows Update in early September

Similar Questions

• 8007371c with windows update error code. Vista Home Premium 32-bit system.

  I have Vista Home Premium 32 bit system and I have problems with windows update since early April.

  The system attempts to update 2807986 KB, 2809289, 2808735, 2820917, 2813345, 890830 (eventually successful), 2817183, 2813170 and 2823324. These will not update after many trials and the system will display an error message saying that some changes could not be completed, returning from changes, will try again on start up, do not turn off.

  On reboot, it gives the message that the updates are not configured correctly, returning changes, do not turn off. I get the 8007371c error code in the popup window windows update but can't find specific information on this code. Help please!

  Thank you.

  Fact: Applications, (Norton and McAfee) are known for do not uninstall or upgrade properly.

  Ideally, should have uninstalled the Norton application AND THEN run (b) the removal of Norton & rebooted tool FRONT (c) you have installed AVG Free and you would have BEFORE your Norton subscription had expired!

  Roll up your sleeves & cross your fingers.

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session! [If a step said to restart, restart!]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. Do not TOUCH the computer until the race is over, and then restart.

  4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  6. right-click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  6. double-click on the file that you saved in # 6 above & accept invites him to MERGE with the registry data.

  7 restart again.

  8. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  9. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  9 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  9. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  10 restart once again and then run a manual check of updates & see if you manage to install all updates offered security (e.g., KB2829530, KB2847204, KB2830290 & KB2829361); Follow all the instructions.

  11. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, feel free to one of your other browsers reaffirm as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Code error Windows Update 0x8007002c & 0 x 8007003

  Hi, I had problems with the realization of windows update since early May... until the week last error is 0 x 80070057... then tried all the option reset the error but it did not help. tried all troubleshooting... but all it shows that there is error, but there is no solution on how to solve... now I get errors 0X80007002C and 0 X 80007003 later...

  Can someone please help... because I am in my last...

  Also tried to do an upgrade to windows 10... but it does not start even

  There are problems of editing with Windows 7 updates that made it almost impossible to reinstall and get updates working properly.  Now he said reports of updates, work stoppage.

  This is all that can be done to updates of Windows do not install in Windows 10 / 8 / 7

  But because WIndows 10 is such a BONE best in all directions when it's a good facility, what I would do is rather a Clean install Windows 10 Upgrade who has zero complaints from tens of thousands of people have followed these steps.

  If you need to upgrade and then realize that it is always a lower quality installation, but we can do better, if you follow overcome failures in Windows upgrade 10

  Edit: MS released a hotfix rollup for WIndows updates since SP2 that may be useful.  See , simplify the updates for Windows 7 and 8.1 | Windows to cradle IT

• What's wrong with windows update, what is not to date & time is like 3 days earlier, when there is no any update

  I have problems with the update & windows update does not work as it has a large number of updates are not upward as the.

  help Windows and support still does not work, why he would declare is under construction. can someone help me

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. What is the problem with the help of Windows and support?

  4. How do you try to check the updates?

  Method 1:

  I suggest to return the item and try to run the Troubleshooter:

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:

  See the article and check if that helps:

  Understand the automatic Windows Update

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-automatic-updating

  If the problem is not resolved, please provide more information to help you best.

• September 2014 Windows Update caused Aero to stop working (Asus Win 7 machine)...

  As a result, I had to perform a restore of the system after each of the two windows updates to get Aero back again once... How it can be stopped with future updates of windows?  Can someone explain MS that it is the reason why they have lower market share... I need to use my machine. MS, be responsible.

  Hi Eric,.

  Sorry to know that you are facing this problem.

  • The problem with aero solved after removing the KB KB2928562?
  • This update has been successfully installed?
  • Were there updates failed?

  You can deal with this problem if the Windows Update optional for video drivers have not been installed successfully or if the components responsible for Windows update didn't work properly during the update.

  Following the troubleshooting steps suggested in this Microsoft article and check if this can help, try.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Windows Update continues to not install Microsoft Security Essentials beta was last updated September 2012 (4.1.522.0)

  I get an automatic notification and attempts to install the program above, but they keep failing.

  It's the only update fails.

  Thank you

  Don

  Hi Don,

  1. What is the update's KB number?

  2. do you get any error code or error message?

  3. have you made changes on the computer before this problem?

  See this link to view the update history.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run Windows Update to convenience store and check if it helps.

  Open the Windows Update troubleshooting tool:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:

  Put the computer in a clean boot state, and then try to install the update and check if the problem persists.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try the steps in the Microsoft article and check following.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Hope the information is useful.

• Undo changes after Windows updates

  Original title: Windows 7 Home Premium

  On 9 September, some updates have been installed on my computer and it resulted in changes basically what Web sites look like.  How can I reverse them?

  Hello

  Thanks for posting your query on the Microsoft Community.

  You can uninstall the update or restore the computer to an earlier date.

  Method 1:

  Step 1: See which Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows7/see-which-Windows-updates-are-installed

  I suggest you remove the update and check if you are able to launch applications.

  Step 2: Remove an update
  http://Windows.Microsoft.com/en-in/Windows7/remove-an-update

  Method 2: Restore the system

  What is system restore?

  See the System Restore with the backup and restore

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

  Thank you

• Satellite U500 - themes changed after Windows Update

  Hello

  Last night, I turned off my Satellite U500 with lots of updates install. But today, when I've reconnected, the start-up took more time and the model had to restart, then it when on the login screen which is now silver instead of blue and when I check the themes, its aero not more. Also the relative to the opening screen to the bottom, there is a logout button instead of shutdown as well as sleep is not more!

  Help, please

  Jaso444

  Hi Jaso,

  If this happens after a few updates to Windows, I guess that's the reason for your problem

  You can try System Restore to an earlier point please?
  If the problem is caused by this s the only option to get rid of this Windows updates.

• TOSHIBA Libretto SD Card - gel after the installation of the SP3/Windows Update

  Hello

  Since the installation of SP3 via Windows Update on a new installation (Original Toshiba Recovery CD) my card reader SD freezes Windows after putting the card in the slot.

  The card is OK and formatted.

  Besides updating windows doesn´t work more.
  I´ll to pass the message on the updates, and the installation stops.

  The patch couldn t be installed because there is a problem with the computer.

  I m of the Austria and I translate to English.
  Hope you can read and understand it - perhaps someone has a solution.

  Best regards

  Ingo

  Published by: ADMIN

  Hello Ingo

  Last days, we read more similar reports on the various problems after installing SP3. As far as I know that Toshiba has faced similar problems after SP2 release and updates were offered. The fact is that SP3 has a negative influence on the different drivers and Toshiba has designed tools and utilities.

  For now, Toshiba has not any update and we need to see what will happen in the future. I always use SP2 and do not have similar problems on my laptop satellite.

  Or you can live with it and wait for update or restore BONES on time earlier and remove SP3.
  I see no solution at the moment.

• Satellite click Mini L9W - B touchscreen stops after Windows update

  Hello

  After a series of windows updates were installed today (July 15) on my Mini click the touch screen no longer works. Uninstall the updates, brought the touch screen to life. If anyone has had this problem and, if so, find out what update caused the problem?

  Mac.: I just fixed it by restarting the Tablet two times.

  Good news!

  But in case this will not work for others, you can use the Windows Backup & Restore to set the operating system to the point of early time (prior to the installation of the update)
  After each update of MS, Windows creates new clean restore points

• Pavilion G7 1355 A9Y70EA: windows update does not

  I had to do a complete reinstall of my windows 7 and even recovery if everything else seems in good condition, the function of windows update does not work despite my now do a restore complete 3 times and also executes all microsofts fix programs for this problem, also tried several fixes YouTube, but nothing works , are getting desperate now. He said only updates and the small bar just keep on crossing of forever with nothing else to be... Help...

  Thans for the answer, I understand what you say, it's just that, until I discarded the computer a few days before (by foolishly following a tip to youtube to speed up computer that has totally stopped it start) windows update worked very well and it has been since a windows 10 installation and a removal of windows 10 the next day a few months ago. The folder c:\Windows\SoftwareDistribution/windows/download exist with only 2 files with names very long gibberish and it is only 15 kb and the other file is 39 k, which seems to be far big enough for any update. I was wondering if instead of the clean install from the recovery partition would be any different doing a clean install from the recovery disks that I did when I got the laptop? see you soon

  Made no difference with update disk and these 2 small updates are only updated Adobe and after 3 off straight, the bar is still meandering along, my update history shows only updates from 2012 when win7 was installed everything first... * beep * Microsoft!

  P. S.

  Yesterday, I decided I had enough and started to install windows from a download 10 earlier, but after it began, I thought "no you know you hated" so I canceled the installation. That's about 3 hours later when I went to stop the laptop it says close and install the updates, so, after 4 hours of installing updates 251 and restarted then installed another 41 updates, then again on the next closure, so basically, I think that the few installation the windows 10 made seemed to start updates to speed?

• HP pavilion g6: windows update does not

  Hello

  I am not able to do the update of windows on my computer. It is running windows 8.1. Earlier, when I used to go to the action centre

  to check the windows updates it normally downloaded and installed all updates. I always do on my wifi network.

  But a few weeks when I started to download updates, it just stuck. The percentage of just stuck on download bar

  0% and does not progress at all. Then I checked my wifi connection, it was connected but my wifi data usage

  didn't progress too. I thought that my wifi would be wrong. But when I started to watch Youtube video

  any fine. So my wifi was not download the updates of windows, but absolutely fine on browser and youtube.

  Now the problem is gone so wrong when I click on updates of windows in the center of the action, the window for action center

  everything freezes. And then I close the action center to Task Manager.

  Please look into my problem.

  Thank you.

  I ran windows update to convenience store and did the same thing you said. But it took too much time (about an hour) so I ran

  out of patience and closed. Then I tried the sfc scan in the admin command prompt and it succeeded.  He siad he had

  repair corrupted files, and then I restarted my computer as you said. This time the done windows update dialog box

  Open, but when I clicked on "check for updates", he said, "windows has not can find new updates, there was a problem.

  looking for updates".  Error code: 8024402C.

  I don't want to 'restore' because according to me, is not without danger.

  Now what should I do.

• Windows Update has messed up my computer...?

  I was going to restart my computer and saw the update windows... so I decided to update my computer so... When windows has finished updating and reloading... He would work for the first minute or so it would freeze... Freeze not literally... but nothing will work and I can still move the mouse but the mouse icon would be stuck in this symbol of loading... (the little blue circle)

  At the beginning I thought I would just let it finish loading all that computers in train load... but 30 minutes later, its still stuck on loading... I did a hard reboot, and the same thing would happen... 30 seconds - 1 minute to load windows it would freeze just about anything under its weight...

  So I thought the windows update screwed up my computer... I loaded in safe mode and tried to do a system restore, only to discover that my computer system restore has been disabled! ??? ... so now I have no idea what to do... someone please help me I have a lot of work to do... Thanks in advance

  on the top of my head, here are my computer specs:

  Windows Vista SP1
  Intel Core i7 940
  12 GB of ram
  NVIDIA FX 1700

  Update on the situation:

  I've posted on several technical forums and 2 of them have been asked to go into SafeMode Add/Remove programs and uninstall then windows updates...

  The problem with that is that my computer does not record the fact that he just installed an update... It is said that the update performed on the computer has been on the 17th of September... the date today here is Sept. 23...

  I uninstalled the 2 updates from 17 without prevail... the problem persists... I load windows in normal mode... and 30 sec-1 min later it freezes just on loading things...

  Should I just keep uninstalling windows updates until the problem is solved?

  No answer to this problem... two days of discussions of the forum tech 6... 1 hour 4 telephone conversation with microsoft support technology... end result? Reinstall Windows... GG

• After Windows updates no clock no start menu.

  OT: incognito.

  After waiting two hours for microsoft to upgrade my computer, which is an absolute pain, I have now no clock, no icons and the start menu does not work.  No, I got a message saying I'm incognito mode. How to get out this please? Thank you. Marnie.

  Hello

  Welcome to the Microsoft community.

  Looks like something was wrong just by doing an update of windows. We will have to return to an earlier point and then repeat the process of updates of Windows.

  What operating system is installed on the computer?

  You can read the following article to find out how to return to a previous point.

  What is system restore?

  http://Windows.Microsoft.com/en-in/Windows/what-is-system-restore#1TC=Windows-7

  Note: Windows updates are available again, make sure that you install them in small bunches.

  Kind regards

• How to find out the Windows Update Agent version I am running

  Anyone know how I can find out which version of the Windows Update Agent I use?  I checked everything and no menu where only allows me to check the version.  This link http://support.microsoft.com/kb/949104 tell me how to get the latest version, but it is not to tell me how do I know if I am running on the latest version.
   
  And what makes it reset my of update windows components?  I read this link (http://support.microsoft.com/kb/971058#appliesto) and understand how to reset components, but I'm not clear on how this will affect my windows update.

  I have Windows Vista Home, SP2.

  Thank you very much!

  Ohanna Hello,

  Thank you for using the Microsoft answers Forums.

  Determine the current Version of WUA:

  Determine the version of Windows Update Agent (WUA) before using it. The current version of WUA is determined by the version of the c:\windows\system32\wuaueng.dll that runs in the current installation of Windows \System32 directory. If the c:\windows\system32\wuaueng.dll is version 5.4.3790.1000 or a later version, WUA is installed. A version earlier than 5.4.3790.1000 indicates that the Software Update Services (SUS) 1.0 is installed.

  When a call is made for SUS 1.0 using the API INTERFACE, an HRESULT of WU_E_AU_LEGACYSERVER is returned.

  You can also use the IWindowsUpdateAgentInfo::GetInfo method to retrieve the latest version of file of the c:\windows\system32\wuapi.dll that runs on a computer. The IWindowsUpdateAgentInfo interface is not supported in WUA 1.0.

  For more information, see update the Windows Update Agent.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.