Windows updates is left off

Similar Questions

• Satellite C660 - Windows updates keep turning off my wireless.

  The latest little have disabled my wireless and I was able to get it working again by rolling back by using the system restore.

  The last time this happened (last month) even this does not solve it and I had to let PC World do the.
  They challenge the updates of Windows one by one until they finally restored the wireless.

  Their opinion was to NOT let Windows automatically update my PC!
  The problem I have now is when do I allow an update?

  Sometimes there are important security updates.
  How do I discriminate between them and more importantly why is my Toshiba exposed to these inconveniences and that Toshiba makes preventing them in the first place?

  Hello

  I can't imagine that the official windows updates would affect the Wlan functionality.
  I recommend updating the driver WLan to the latest version available and allow all updates to windows.

  The update of the WLan driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Stuck on Windows ' update 7 orf 9.

  My laptop was to install windows updates and turn off.  He has been installing update 7 or 9 for several hours.  I think he is stuck and I can't stop it, restart, or stop the update.  What should I do?

  Hi Sandy,
   
   
  I suggest you to follow the steps in the link and then check if it helps.
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  
   

• How can I stop my laptop automatically update and turn off when im using, I want to do after ive and turn off?

  I want to shut down the computer to close until the update when im in the middle of using it, how can I updated it when I choose to disconnect?

  I want to shut down the computer to close until the update when im in the middle of using it, how can I updated it when I choose to disconnect?

  Why don't you go to the MANUAL update?
  You will receive notification when there are updates available, and you can run the installation, whenever you are ready.

  Start > in the search box, type windows update > Enter > left column, change the settings...

• How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

  March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

  Hello

  If you think the update caused the blue screen then uninstall it to check.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ==============================================================

  If not, remove the updates help then we can troubleshoot the BlueScreens.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Computer crash - blue screen after installing windows updates

  After you have installed Windows updates waiting on the computer earlier this week, we were not able to get the computer working again.  We were asked to back up and restore the factory settings, which we did.  It instructions update you Windows. When we download the updates it crashes again.  Does anyone know if there is a problem with one of the recent updates that we should avoid so that we our computer working again?

  Hello

  Since you are quite sure this is an update to the source of the problem I want to troubleshoot using this method.

  Control Panel - Windows Updates - upper left settings - set to download but allow you to install them.
  To operate the system and see if there are problems.

  If no problem try to apply updates in small groups or even one at a time, depending on how
  There are many. Beware especially of driver updates that may be older that you have or
  those even incorrect.

  ---------------------------------------------------------------------------------------------------------------

  These can help to solve the problems of update.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ============================

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Update disabled

  Since Windows Update is disabled, a manual check of updates can still be made or is Windows Update must be on a manual to check for?

  How Windows Update is turned off?

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Default configuration of the windows updates. returning from changes. do not turn off your computer. (Infinite loop)

  Problem:

  • Computer: Lenovo N580
  • Windows 8
  • Reset my computer to factory reset
  • All my files uploaded to the computer
  • Launched about 120 windows updates
  • Now, the computer is stuck on the blue screen with the message that seems to never go "failed windows update Setup. returning from changes. do not turn off your computer"I can't access the login screen or any screen to disable the windows update.
  • I tried the solutions posted by other users with the same problem but without success.
  • Please help me with a solution where I don't have a factory reset because I don't have another copy of all my files!
  • Also, is there a way to access a safe mode on Windows 8? I tried F8 or SHIFT + F8 after starting, but nothing happens. I read a post online where Windows 8 have removed this feature. Is there another way?
  • Help, please! I AM ETERNALLY GRATEFUL!
  • THANKS IN ADVANCE!

  See: http://support2.microsoft.com/kb/949358/en-us (run a system restore)

  Perform the system restore from the recovery of Windows and check.

  (a) once you start your computer by using the Windows DVD or disc repair system, a black screen is displayed with the gray text "press any key to start from the CD or DVD. Press a button on any.

  (b) select the correct time and type keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select System Restore.

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Reference link:

  How to refresh, reset or restore your PC.
  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  If you don't have disc to install Windows or the system repair disc, contact the manufacturer of the computer.

  You can also refer to:

  How to create the installation media for a PC refresh or reset:
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer

  Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
  Computer: hp pavilion n006sm
  Operating system: win 8 pre-installed
  At the moment I'm stuck on this window for over an hour and nothing has changed

  Seems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.

• 'Configuration of Windows updates' when I turn on or off

  I bought a new PC in August and no problems so far.  When I turn on the PC I get a message saying "Configuring Windows Updates - do not turn off your computer."  It takes about 2-3 minutes.  The same thing happens when I switch off.  I inadvertently did something to cause this?  Hope someone can help me.  Thanks in advance.  Janis B

  Hi Carriesmum,

  This isn't an error message that it would take place usually if an update has been installed and it must configure when you restart th.

  But this should not happen at every reboot.

  First of all, I would say that you wait for the process to complete and then check if the problem persists.

  If the problem persists, then try the steps below and the check

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  If you use Windows vista, refer to the Microsoft article below

  Message when a Windows Vista-based computer takes a long time to restart or stop: "configure Windows updates.

  http://support.Microsoft.com/kb/932141

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem of multiple windows. Windows update 0% complete, "ready to set up Windows. "Please do not turn off your computer", etc.

  Hi all, I have recently experienced some of the problems reported here: - Windows update doesn't work (stuck at 0% for the hours) - Windows cannot stop ("preparing to set up Windows. Please don't turn off your computer") - MSE is out of date - I can't unzip files - some programs no longer work - I just can't stop some services (like Windows update). It times out. etc... I have Win7 X 64, and the last update that has worked with success has been about 3 weeks ago. Thanks for your help!

  Very well.

  Given that the 'MemTest... returned some mistakes,' contact the manufacturer for support under your warranty or Service contract. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• AUTOMATIC WINDOWS UPDATE SE FARM ON HIS OWN OFF SEVERAL TIMES A DAY I HAVE TO RESET IT - HOW CAN I FIX THIS?

  I have to reset manually the automatic updates several times a day because it turns off

  Suggestions:

  Reset the component windows updated once and for all with Mr. fix it.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Still, Microsoft!

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!