"Windows updates were not be properly configured and restoration of changes." The computer freeze

Similar Questions

• Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

  Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

  Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

  Hello

   
  You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
  Reference:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
   
   
   

• Error: Files needed to display video are not installed or do not work properly. Restart WMC, or restart the computer

  Original title: windows media center

  I have reinstall Win 7 and finally managed to the precious WMC got the signal, channels, etc., but when I select all the channels I get this: "the files needed to display video are not installed or do not work properly. Restart WMC, or restart the computer. "I have resource disc and have re-install the drivers and utilities to the best of my limited knowledge. Help, please

  When I type in run in the start search box, it only pulls up "run programs for previous versions of windows" I can't run your steps without responding to this prompt.  What should I do if I can't follow your steps as you put it?

• Cannot install the v18 Beta in Windows 8 due to restrictions of Windows Update.  How can I work around those?  Change the approach to update does not seem to help.

  HI - we are trying to install the beta version (18) on a Windows 8 machine for one of our customers.  But, the update of Windows does not allow that to happen.  We changed the approach of updating to do not have the automatic updates.  But that does not solve the problem.  Any help is appreciated!  I guess it's a pretty easy fix, but unfortunately I'm not Windows savvy these days.

  Thank you!

  Oh, it's not good advice.  Uninstall the last update to Flash will not remove Flash of the system, and it will leave you with a vulnerable version, the Senior Flash Player.  Install the player ActiveX for Win7 won't upgrade Flash Player component built into Internet Explorer, then the user will be still stuck with an outdated version and no beta version until they run windows update again.

  We distribute a beta version for Internet Explorer on Windows 8 and over all because we do not have this distribution channel (it's the same reason that we do not have a beta of Chrome), and the binary of Win8 differ from those we publish for Windows 7.  There is no effective way to do at the moment.

  We talk to Microsoft to provide a mechanism for the distribution of beta versions and releases of extended support of Flash Player in Win8 + users, but these vehicles of distribution would have to come directly from Microsoft and we always talk just to this topic, so there is no solution in the short term.

  If you want to evaluate beta versions on Win8 + you look essentially NPAPI on Firefox or PPAPI on the opera.

• Windows Update does not work properly

  I just bought a laptop barely used with Windows 8 on it, I'm doing all the updates, so I can update to 8.1, and then to 10 when its released. IM using the windows update Control Panel tool and he says 41 updates, I try to start it and the status bar moves constantly but the downloaded amount never detached from zero even after 7 hours and do never install updates. Is this a common problem, is there something Im not doing right, just wonder why it will not update.

  Reset Windows updates

  https://support.Microsoft.com/en-AU/KB/971058?WA=wsignin1.0

  or https://www.winhelp.us/reinstall-windows-update.html

• Windows update is not functional / work after a clean install on the XP Machine

  I have a desktop Dell Dimension 4700 old, with Windows XP Edition family and SP 2 installed.

  It's basically an extra computer upload us pictures, etc.

  I finally decided it was time to wipe the hard drive and return the PC as long as you plant.  I used the "Dell PC Restore method" - using Ctrl + F11, then following the instructions.

  So far, it seems to have worked.

  However, one of the first tasks I want to do is start installing the windows updates (this machine has been built in 2004).

  Here is the error I get:

  
  Microsoft Update

  The website has encountered a problem and cannot display the page you are trying to view.  The options below might help you solve the problem.

  ERROR # 0 X 80240036

  For self-help options
  Frequently asked Questions
  Find Solutions
  Windows Update Newsgroup

  I don't think that microsoft Update site is down, I can access it with my other machines.

  Any ideas?

  Thanks for the clarification on the caveat that the download must be used for professionals... below... I will try a download anyway.

  It is now the only way to get SP3 installed, regardless of your technical ability and IT environment.

• Error-"Windows Installer Service could not be accessed. This can occur if the windows installer is not installed properly.

  Original title: Windows 7 critical updates

  A number of critical updates made automatically in the last two days.  He was stuck in a loop "failed to install...". "for hours.  I tried to make it a point to restore in safe mode, and it is stuck in a loop (more than 12 hours).  I tried to uninstall and it won't let me.  Now I get "Windows Installer Service could not be accessed.  This can occur if the windows installer is not installed properly. "If I turned off the computer and do not ne pas demarrer start in safe mode, shut up always on the original"failed to install ".  I need help!

  Windows restore points have never been of any property,

  Images of a completely separate hard drive system would be easy to undo this question

  It's so time spent to create system images before downloading and installing windows updates

  http://www.SevenForums.com/tutorials/219533-troubleshooting-Windows-7-failure-boot.html

  http://www.Macrium.com/reflectfree.aspx

  https://www.YouTube.com/watch?v=KQA7NlLvxg8

  If you need to reinstall windows

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Reformat and re-install XP SP2 but now struggling with the updates. Windows Update does not work. Loading SP3 will fix this?

  After repeated BSOD (FLTMGR_FILE_System 0x000000F5, 0 x 00000066, etc.) errors usually 7 to 8 minutes after the start, I reformatted the drive C: and re-installed XP SP2.  But since then, I had a very hard time updated.  I even got again the WORC and had to go back to a previous restore point after installing IE8.

  Windows Update does not work.

  [Error number: 0x8024400A] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues

  Hello.

  Try the suggestions on this site:

  http://support.Microsoft.com/kb/836941

• Windows update - Windows Update is not restore my windows/desktop computer after installing updates

  When running Windows Update is not reproduce my office and rather trashes everything.  Ysterday I left to work with over a dozen research Internet Explorer open and this morning, I get to a Windows auto update cycle, which wrecked all.  Well Yes, they are lost and of course, I can spend an hour or more to find once again but my boss is breathing down my neck, as if it was my fault.  Microsoft how inconsiderate!

  Of course, I have a solution, TURN OFF Microsoft Update but is this really what Microsoft wants?

  Please people think.

  Hi jbeech,

  No, I don't work for Microsoft and I am not associated with them in any way (other than to receive awards and certificates I earned on my own).  I'm a volunteer civilian gift free time to help other people.

  I meant nothing personal, per my comments of workflow.  I was just trying to do my best to help you avoid this problem in the future and apologize if you took it the wrong way.  I agree with you that he must restore it things automatically (as it does when you use the hibernation), but maybe that can be done (at least not always) because updates may affect items that are open and to update these programs must be closed (which makes saving them more difficult because if they look different after the update) It may not work if we try to restore them unless they can find a way to save ONLY the information and it is a much more difficult task).  This problem does not occur with an accident or an unexpected shutdown (and a complete restoration in cases does not always work as well and completely that we hope - at least I had problems back exactly where I was with all that every time).

  While you can choose to turn off automatic updates, you don't want to not go for very long without updating your system, so checking periodically (although if you want to do on a daily basis - I would try at least every Wednesday at least since most updates are released every Tuesday) is important in all cases.  The option I suggested (i.e. automatic downloads but no facilities) would at least them already downloaded (you would not need to check - that they would be there) it would take much less time to choose and install if you show if off completely - and when you decide to install, you will find it takes MUCH more time because you need to download and install (unless they are already downloaded).  But it is entirely up to you.

  Good luck and best wishes!

• Update for windows update does not work

  Yesterday (24/06/2014), Microsoft has released an update for windows update, which according to them was necessary in order to receive new updates. It is installed without any problem, except that it doesn't work.

  I tried the fixit tool, but who finds no errors. To make things worse, it seems that this update of windows installed another version of the update agent is suitable for my system (Windows 7 Home Premium). Windows support for this update site indicates that the correct version is Windows update agent 7.6.7600.256, but windows update version 7.6.7600.320 and you can see the result of the image as to what happens when I try to check the updates.

  I prefer not to do a system restore, but how to fix this?

  Is this the same issue corrected / posted by LoginBroken on February 23, 2011?

  Dave in pa,

  Do a system restore point.

  Open Notepad. Copy the information between the lines, then paste them into Notepad

  ===========================================

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 wups2.dll

  ===========================================

  Save as Update.cmd

  Right-click on Update.cmd, on the left, click Run as administrator. Answer Yes to the 4 questions.

  Restart the computer and see if the Windows updates works.

  Rick

• Windows updates do not

  I have a problem with the windows updates work don't not since the update of windows 7 to windows 10, not climb in with it and make it back to windows 7 again.

  Since the restoration, a month ago, the processor in the Task Manager is consumed by svchost.exe (netsvcs) with service wuauserv being the culprit.

  If I stop the wuauserv service cpu returns to normal, but this does not resolve the cause of the problem.

  I tried various methods available online, disabling updates, restart the pc and then by choosing new automatic updates. but monitoring network traffic, it seems that windows update is not just do something.

  I tried the solution of cmd too stop the services for then reactivate, but windows don't allow BITS to be stopped.

  Any ideas what to try next?

  Thank you very much.

  See:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

  Best regards, VZ

• Windows updates is not configured properly

  After several formats again, I get a massive list of installed updates.

  I have download the list. They install. Then, they cannot be configured.

  Download list takes more than an hour and totally makes my phone useless.

  I had to stop all updates.

  Any suggestions?

  Hello Herbskel,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because corrupt Windows Update files or parameters.

  I suggest you run the Windows update Troubleshooter and check.
  Reference:
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  He makes sure your computer is connected to the Internet, and check if your card network and Windows update services are running properly.

  If it does not help, reset the Windows update components and check the issue.
  Reference:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  : Note manually reset Windows update components.

  Important:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• KB978601 and KB979309 - Windows Update would not download

  Hello

  I'm trying to install all of the updates for my Windows 7 (x 64, PL), but both of the subject do not want to download. Windows Update all the time to see the "0 KB 0%. On my second PC, I also have Windows 7 (x 64, EN), but here all the updates (inside these two topic) were downloaded and installed successfully.

  Do you have some advice on this?

  eckko,

  The 'Ko 0% 0' indicates usually that updates were downloaded already in the system or that they are regulated, and the system is in a Quebec awaiting their download. Because updates are from April of this year, then it must be assumed that it is a new installation or reinstallation of Windows 7.
  Updates are intended to solve the problem shown here-
  Microsoft MS10-019 - critical vulnerabilities in Windows security bulletin could enable Code execution (981210) remotely

  Suggest you manually download the updates and Save them.
  Update security for Windows 7 for x 64-based systems (KB978601)
  Update security for Windows 7 for x 64-based systems (KB979309)

  When the download is complete, close all open programs and browsers. Try to install now.
  If they still won't install, and configure the system to boot from a clean state and see if they install.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  
  NOTE: in start-up mode minimum state all the 3 third party programs will be disabled. Unplug the network connection system it is or open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  If updates are not always install after doing above, then contact Microsoft for assistance to get installed.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Expert MowGreen Windows IT Pro - consumer safety

• Watch "updates were not correctly configured. Revertingchanges. Do not turn off your computer.

  When I turn on my laptop this message "updates were not correctly configured.  Restoration of the changes.  Don not turn off computer. "Have not been able to go beyond that?  Any help will be appreciated.

  Hello

   
  You have security software installed on the computer?
  
  I suggest you to try the steps in the following Microsoft article and check if this may help.
  
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/949358
   
  Hope the information is useful.

• Windows Update does not properly

  I am running windows 7 on a hp Q8300 quad core desktop computer processor.  Windows Update (do not remember the official name) has worked well up until now.  2 days ago it downloaded updates and and asked to close at the end of a session, as it is often done without any problem.

  Now when you start again it says something like "processing and installation of updates 0% complete, do not turn off your computer.  It was 0%.  Finally, it will start in any case, but updates are not yet installed.

  Thanks in advance for your help.

  Download and save the Fixit on this page - How to reset the Windows Update components?
  Once the download is complete, close all open programs and browsers.
  Now Configure the system to boot .
  NOTE: If a 3rd party firewall was previously used, open Windows Firewall in Control Panel to make sure that the native Windows 7 firewall is now on.
  In the clean boot state, all the firewalls of 3rd party will be disabled. Using the Fixit the system must be connected to the internet.

  Now run MicrosoftFixit50202.msi and choose the default mode. Reboot the system to the same State of clean boot and see if he can find, detect and download updates now. If it is possible, then Cancel the Clean boot steps and restart in normal Windows mode.

  In normal Windows mode, can the system installs updates now?

  If this isn't the case, configure the system to boot once more and run the Fixit by using aggressive mode. Restart when it's done and follow the steps above to see if the system can update now.

  MowGreen Services update - consumer safety