Windows updates is not configured properly

Similar Questions

• "Windows updates were not be properly configured and restoration of changes." The computer freeze

  I have a laptop Dell inspiron 1501 with windows vista on it.

  I don't have the disc of windows Vista DVD you are referring to, I have never recived a Dell I bought the computer on the internet with vista already installed.

  My problem is that, with respect to the windows updates, I get a message saying "Windows have been developed to date not be properly configured and restoration of changes". I have 51 updates pending, 47 of these updates is equivalent to 170 MB.

  As a result of these updates, I think it's the cause of my freezing computer once I have connected and I have to restart only having do not 2 - 3 times.

  When the computer "freezes" the cursor does not move throughout the scene, none of the keys works, including Manager tasks etc., the only thing that works is to turn the computer off. Sometimes, there is a beep, beep once the computer crashes.

  Over 95% the updates I have try have 'no '.

  I'm lost as how to how to repair?

  All good suggestions welcome to solve this problem, the simpler the better... I don't want to have to buy a new computer... If I won't Dell... and I'll have to get the windows disc... most solutions here seem to require it...

  Hi AL0001,

  Run the chkdsk command to check that there are no problems with your hard drive. To run the disk check, follow these steps:

  1. Restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options.
  2. Select Mode safe mode with command prompt.
  3. At the command prompt, type chkdsk/r (there is a space between the k and /)

  Meanwhile, check the Dell website to see how you can get a recovery disk in case you need to recover Windows.

• Error code: 80070005 (updates are not configured properly)

  I am experiencing infinite loop "updates were not correctly configured.  Returning from the changes. "Windows Update poster 11 updates did not include KB 2183461, 982665, 980436, 981997, 2160329, 982799, 983589, 981852, 982664, 2079403 and 982214.  I tried to install manually via the download section.  It has not yet.  The error code is 80070005.

  Hi Dwsamee,
   
  1. who is the edition of Windows that is installed on the computer?
   
  Try these steps and check the result.

  Step 1: Uninstall the security software

  a. see Uninstall or change a program

  b. once the security software is uninstalled, restart the computer.

  Very Important: Be sure to reinstall the security software after installing Windows updates.

   

  Step 2: Download and install the update for your Windows system preparation tool

  a. see http://support.microsoft.com/kb/947821

  b. download the good update for your Windows and install it successfully.

  c. restart the computer so that the changes take effect.

   

  Step 3: Install updates

  a. connect to the computer as an administrator.

  b. Click Start, type Windows Update, click Windows Update.

  c. install the updates one by one.

  d. restart the computer after each update is installed.

   

  See Updates Windows Installer

   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update does not configure at startup

  Hello. I hope someone can help me. On startup, I get a message that windows sets up third stage with 0% complete. It remains like this and windows fails to load a more far. Even at night. I tried safe mode and the same result. I have windows vista SP2. I hope someone can give me a way out of this please.

  Hi ColinHildreth,

  Follow the steps listed in the article mentioned below to solve the problem:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• Windows Update does not work properly

  I just bought a laptop barely used with Windows 8 on it, I'm doing all the updates, so I can update to 8.1, and then to 10 when its released. IM using the windows update Control Panel tool and he says 41 updates, I try to start it and the status bar moves constantly but the downloaded amount never detached from zero even after 7 hours and do never install updates. Is this a common problem, is there something Im not doing right, just wonder why it will not update.

  Reset Windows updates

  https://support.Microsoft.com/en-AU/KB/971058?WA=wsignin1.0

  or https://www.winhelp.us/reinstall-windows-update.html

• Windows 8.1 - secure boot is not configured properly

  Hello everyone. Since I installed Windows RTM 8.1, I kept making a watermark "secure startup is not configured properly" on my machine. The problem is that the secure startup option is enabled in the BIOS (and cannot be changed).

  The problem is that Windows 8 detects that it is not. Any ideas what could be the problem?

  It does not affect my work, but the watermark is very annoying.

  Thanks for the info,

  --

  Robert Iagar

  
  

• Pavilion g7-2201sd windows 8 ends not configure updates

  My HP Pavilion G7 2201sd / Windows 8 ends not configure windows updates, it gets stuck on 12%, no error message. A few times a week the laptop wants to update, but does not then complete it. Anyone know what is the cause of this and how do I solve this problem?

  See this topic.

• Windows Update does not properly

  I am running windows 7 on a hp Q8300 quad core desktop computer processor.  Windows Update (do not remember the official name) has worked well up until now.  2 days ago it downloaded updates and and asked to close at the end of a session, as it is often done without any problem.

  Now when you start again it says something like "processing and installation of updates 0% complete, do not turn off your computer.  It was 0%.  Finally, it will start in any case, but updates are not yet installed.

  Thanks in advance for your help.

  Download and save the Fixit on this page - How to reset the Windows Update components?
  Once the download is complete, close all open programs and browsers.
  Now Configure the system to boot .
  NOTE: If a 3rd party firewall was previously used, open Windows Firewall in Control Panel to make sure that the native Windows 7 firewall is now on.
  In the clean boot state, all the firewalls of 3rd party will be disabled. Using the Fixit the system must be connected to the internet.

  Now run MicrosoftFixit50202.msi and choose the default mode. Reboot the system to the same State of clean boot and see if he can find, detect and download updates now. If it is possible, then Cancel the Clean boot steps and restart in normal Windows mode.

  In normal Windows mode, can the system installs updates now?

  If this isn't the case, configure the system to boot once more and run the Fixit by using aggressive mode. Restart when it's done and follow the steps above to see if the system can update now.

  MowGreen Services update - consumer safety

• Windows Update will not updated configuration complete

  Windows updates

  When I start the power down on my PC it says install updates and shut down. Well well after he makes the configuration and stops and I restart the PC will say setup of new updates. Well after his weight made to say: updates are not configured correctly... Redo or a reconfiguration of updates... for some reason any my updates are not what they are supposed to... and clue whats going on here?

  Hey stump jumper.

  (1) remember the update that has been offered?

  (2) is the computer in a reboot loop?

  Step 1: You can follow the steps mentioned in the article below, which deals with a similar question

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358/en-us

  Thank you, and in what concerns:

  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

  Original title: my "Windows Installer is not installed properly.

  I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Error message "Could access the Windows Installer Service" when you install the application

  Hope the helps of information.

• Windows 8.1 secure pro Boot is not configured properly

  After the upgrade through shop windows to Windows Pro 8.1, I get the watermark:

  «windows 8.1 secureBoot pro is not configured properly to build 9600»

  I went into the BIOS, tried allowing the secure startup, disabling, restore the factory keys, but nothing has solved the problem.

  The command (windows powershell administrator) Confirm-SecureBootUEFI returns false.

  Any ideas?

  Best regards

  Z.

  I explain how I solved the problem in my Ideapad y510p.

  1 - Press the windows key and the search for "start".

  2 - Click on "change advanced startup options."

  3. in the title of "Advanced boot", click "restart now."

  4 - click "troubleshooting."

  5 - Click on 'Advanced Options '.

  6 - click on "parameters of UEFI firmware.

  At this point, you should see the configuration of the bios/uefi page:

  7 - go to 'security' and then 'reset to installation mode.

  8. then, go to 'leave', then 'exit saving changes.

  Once back in windows, repeat the steps 1 to 6, then in the bios screen:

  -return to 'security' and this time select "restore the keys to the factory.

  -Then go to 'leave', then 'exit saving changes.

  At the next reboot, the problem should be solved, or at least it worked for me. I exclude not only performing the second part of the operation as described is sufficient to solve the problem.

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• Windows Vista: updates are not configured correctly, returning from changes

  my computer may not be updated, whenever I turn on or restart my computer, the message "Configuring updates stage 3 of 3 0% Please wait, don't turn off your computer" comes but after awhile, it says 'updates are not configured correctly, returning from changes' it keeps past, I did everything I could , but nothing happened. What should I do?

  So far there are problems or there are many who have this problem?

  Have you tried to disable temporarily running anti-virus software?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/#appliesTo

  Troubleshooting in Win 7 vs KB971058 for Vista
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/e1f0a807-E132-4FDC-ABF8-5bad87b64204

  The system update tool

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows Update will not be update__

  Windows Update will not update
  but all other internet activities are very well

  This isn't the firewall

  Reset Windows Update components:
  http://support.Microsoft.com/kb/971058
  http://support.Microsoft.com/kb/883825

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP