Windows Vista - cannot connect you

Similar Questions

• HP pavilion d4790y windows Vista cannot connect to internet unless you use WEP wireless

  I have a HP Pavilion with Windows Vista 32 bit home premium d4790y.  I can connect to my ISP wireless router using the HP internal network adapter, but the connection between the router and the internet does not work unless I downgrade the router security to WEP.  If I connect to the router via a wired connection, I can connect to the internet without problem even with WPA2.  I did all the troubleshooting steps recommended as reset the router to check updated network adapter, uninstall/reinstall the network adapter driver, driver release and renew the ip configuration, etc.  Information?  Is there a newer driver that is not recognized during the update search process?

  Hello

  It is a hardware thing and the wireless card does not support this. Changing the wireless card can be the way to go.

  I hope this helps.

• "" Windows Vista cannot connect to my network, error message "network not found path.

  I have a laptop Windows Vista, up until yesterday, I was able to connect and browse my network, now the computer shows just 3 computers, always in the same network, which connects in the same router, nothing has changed in the network environment, I can just browse the network, when I try to log in as \\[ipaddress] it says "path not found network". , but if I run cmd and type 'ping [IP address]' computers meet the ping.

  Can someone help me, thanks!

  Hello

  I suggest that you post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/threads

• I have Windows Vista cannot connect to internet.

  I can't connect to the internet via my Windows Vista computer. I'm going to use my computer laptop girls to send it. I get a message saying, for example,www.siteadvisor.com is not set up to establish a connection on port "World Wide Web service (HTTP)" with this computer. I can't even connect to Microsoft.com to get relief. It was working fine before you go to bed one night. I woke the next morning to find the new Windows updates and I that I could not establish an internet connection. I had services wireless for about 2 months now, but don't think that this is the problem because it says I have a great connection. I get this a message from McAfee that I have a Trojan horse. Could it have caused the problem? What should I do to fix this?

  It might be better for you if you post this question on the forum Internet Explorer:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Computer laptop Windows Vista cannot connect to shares on my Windows 7 desktop. It requires a username and password, but it does not work.

  original title: Vista to Win 7 networking issue.

  I have a Vista laptop that I am trying to use with a desktop running Windows 7.  I try to use the file and printer sharing.  I have no problem with internet connections through my U-Verse gateway.  I am also capable of sharing files from the Windows 7 Desktop, but when I try to access the Windows 7 laptop computer it askes for a user name and password.  I passed to the page Advanced Networking two computers and confirmed that the network discovery, file sharing, public folder sharing, and printer sharing are all 'ON '.  Protected by password sharing is 'OFF '.

  The problem seems to come and go.  Sometimes I can get it to work, was not.  Sometimes, it works once but not a few hours later even though computers have not changed or been restarted.

  A note more than I also use an XP laptop on the same network, and it connects more reliably.

  Any help is appreciated!  It drives me crazy.

  Charlie

  When I just opened the page to display the status of 'group', the system started working.  I have not made no other changes but Vista laptop now recognizes the Office!

• Impossible to move to Windows 8, error "we cannot connect you right now."

  Original title: install the update to Windows 8

  I had planned to upgrade my system 2 years ago and purchased windows 8.  I get all the time around him and can not go beyond the 2nd page. The mistake is we cannot connect you right now, but I think that the site is no longer active.

  How can I install 8 so I can move 10 or how I can get 10 without paying again?

  If you have the product key of windows 8, you can do a clean install of windows 10 using your Windows product key 8. Use the tool of creation of media.

  Download Windows 10 media creation tool

  You can also use the upgrade this PC option and I think it should also work

• Games for windows live cannot connect

  Games for windows live cannot connect to the internet, this problem started last week when I tried to play Dawn of war 2 online. At that time I was running Vista Ultimate 64 bit and after exhausting all existing boards on this site and many others, I decided to completely format my PC and start again with Windows 7 64 bit, but I have the same problem exact. only now my profile is no longer stored on my PC because I formatted so I can still play offline.

  After trying to connect, it says "the profile could not be connected to LIVE. "There may be a network problem or the Windows Live ID service may not be available" option on the GFWL client network status says:

  NIC: Local 2 network connection

  Internet IP address: not connected

  Local IP address: 192.168.2.9:0

  System link address: 192.168.2.9:3074

  Account PC: PC.000000000000

  UPnP: Not signed in

  PC ID: 0X10DF99910D0A00E8

  I have made the following recommended to others in similar situations, has passed all the recommended ports (TCP 53,80,443,3074) and UDP 53,88,3074, installed and running Windows fix it, Microsoft.Net 4.0 update, installed and run Winsockfix, disabled windows firewall (I have not installed any other protection software yet) compatible UPnP on my router, changed my static connection type and still no progress. My router is supported and I am in a country supported direct (UK). This my independent being, but I also experience certificate errors when you use Microsoft sites, which is strange as I said that the Web site of the company that developed the program that I use is dangerous. It's my totally finished in guys any help would REALLY be apreciated. Cheers.

  I can't believe ive finally resolved, hours after validation. the button on my motherboard battery had been dislodged and my date and time have been reset in 2009, whenever I stop my PC. everything is working fine now GFWL working and no more certificate errors.

• Windows Vista cannot find any networks after reformat

  Windows Vista cannot find any networks after reformatting. Help!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• "We cannot connect you right now. Check your internet connection and try again.

  So, I have a HP PAVILION DV9000 initially delivered with Vista Home Premium that I upgraded to Professional 7 back in 2010.

  I bought the key $39.99, while my PC was still on 7 Pro, but it would just not download on it saying 'download failed. "Unspecified error", so I just picked up the laptop to factory default which is Vista now.

  But now the performance of the installation of mswos.com after filing my sound details giving the error of the object. Kindly guide on how to proceed.

  I imagine that this is happening because the software was bought for 7 Pro PC and now it is being downloaded on a Vista PC, so it is not allow to happen.

  Is it possible to return this order & buy a new key or another work around that.

  Thanks for reading.

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive a error message "we cannot connect you right now. Check your internet connection and try again"when you try to install Windows 8 I suggest you follow the troubleshooting steps to check if it helps.

  You can contact the ESD support: http://support.microsoft.com/gp/esd-support-phone-numbers
  Just reply with the results. I'd be happy to help you further.

• Getting fast to install Windows Vista SP1 after you install successfully.

  Original title: message update for something, I've already updated.

  I keep told that there is an update due after that I have already installed it. He tells me that I need to install service pack 1 when it is already installed. Help, please.

  Hi Billy,

  Thanks for posting your question in the Microsoft Community forum.
  Description of the problem, I see you have found fast to install Windows Vista SP1 after you install successfully.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Note: This link applies to Windows Vista.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  For more information, please see the link.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Windows Vista cannot open .exe files and rundll32.exe are missing and are not accessible.

  Windows Vista cannot open .exe files and errors occur with rundll32.exe.

  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html
   
  Get the patch exe file by clicking on the page and choose Save target
  As. Can you double click it? Otherwise you can start
  c:\windows\system32\regedit.exe find and right click on it and choose
  Run as administrator. Does this work. Otherwise copy regedit.exe for your
  Desktop and rename the regedit.com. You need show extensions to rename.
   
  That's what help said to show extensions.
   
  Show or hide file name extensions
   
  A file name extension is a set of characters added at the end of a file name
  determine which program should open it. Follow these steps to choose
  If Windows displays these file extensions.
   
  Click to open the Folder Options (in Control Panel).
   
  Click on the view tab, and then, under Advanced settings, do one of the
  Next:
   
  To hide file extensions, select hide them extensions of known file types
  check box, and then click OK.
   
  To view file extensions, clear hide them extensions of known file types
  check box, and then click OK.
   
  Start Regedit, menu file - import and import the downloaded file.
   
   
  --
  ..
  --
  "Leecherous" wrote in message news: 9a998a10-f4f6-433 a - 9 b 55-c051da91f152...
  > Windows Vista cannot open .exe files and errors occur with
  > rundll32.exe.
   
   

• We get an error 'something was wrong and we cannot connect you right now. "Please try again later ' signs in Family Safety website.

  * Original title: unable to connect to the family safety

  I tried to connect to website Windows parental control for 2 days.

  I tried two different computers in two places - don't share is not the same ISP, browser, etc.

  I get this message:

  "Something was wrong and we cannot connect you right now. Please try again later. »

  The service is down?

  I heard this on another post, and it WORKED for me also!  I logged on my account live.com and udated my name in my profile.  I don't know if that it or if MS has solved something but I can not connect on fss.live.com.  Please share and please post if it worked or not.

• Cannot use parental controls, error, something went wrong and we cannot connect you right now. Please try again later.

  When I try to use the connection parent in windows, I get the following error:

  Sorry, the service is not available now

  Please try again later.

  Error code: 803D 0013

  When I try to log on to the familysafety.live.com site, I get the following error:

  Something was wrong and we cannot connect you right now. Please try again later.

  This happens on both accounts of parent. Here are the addresses of e-mail for these accounts: * e-mail address is removed from the privacy * and * address email is removed from the privacy *.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems access Family Safety.  Let me try and help you with the issue that you are facing.

  Many users facing this issue fixed by updating the Microsoft Account profile.

  Please update the name and name in the Microsoft account profile, then check if it helps.

  See the article:
  Security information for the Microsoft account: FAQ

  http://Windows.Microsoft.com/en-us/Windows-Live/account-security-password-information

  See also the suggestion provided by "Jude D. McCoy' of this thread:

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/cant-login-to-family-safety-website-redirect-loop/38477335-e8ae-4AA1-81c8-acb6343377f9

  I hope this helps. If the problem persists, we will be happy to help you.

• Windows 7 cannot connect to a shared printer (error 0x0000000d code)

  I try to add a laptop to my home network and can not get the printer to connect.  Everything is wireless.

  The main PC uses Windows 7 Home Premium.  32-bit operating system.

  The new laptop uses Windows 7 Professional.  64-bit operating system.

  The all-in-one is Kodak ESP9 + 0250.

  The laptop recognises the printer on the network, but I get the error message: Windows 7 cannot connect to a shared printer (error 0x0000000d code)

  Any ideas on how to make the printer connect?

  The usual reason is no driver on the laptop. You should install the drivers and the software of the printer on each computer on the network. Once this is done, it will connect well. The network itself, will show the printer as a gift, just the laptop won't connect ' cuz he doesn't know how.

  Many answers here: http://social.technet.microsoft.com/Forums/windows/en-US/d02718d8-cf5d-45de-9206-46714a549ee0/windows-cannot-connect-to-the-printererror-0x0000000d?forum=itprovistaprinting

  .

• Windows Vista cannot complete the update of windows since July 2016

  Windows Vista cannot complete the update of windows

  Since the last update July 2016

  no error message, just perpetually "check updates".

  everything I start the update of windows

  help please

  Hi emiquestion:

  Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.

  Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9.  Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month.  Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS