Windows Vista guard freezing and 'unresponsive. '

I have a HP Pavilion dv7 Notebook PC with Intel Core 2 Duo CPU P8600 @ 2.40 GHz, Memory (RAM) 6.0 GB, 64-bit operating system. It has been gradually worsens with the "no answer", seems to "freeze" screen become white. I've updated the latest. Have updated the program, Trend Micro Titanium Maximum security and cannot find anything wrong. I'm not experienced with a computer by far if there is no help for baby in the computer world it would be appreciated!

Hello

Heat and/or material could easily have a role in this issue. Remove ALL power and reinstall the memory.
in fact, remove and replace - don't do not just tight. Also erase the vents and make sure that the fans will be
(listen to) work.

Check with HP Support, their books online and ask in their forums known issues.

Support HP & drivers
http://welcome.HP.com/country/us/en/support.html

Contact HP
http://welcome.HP.com/country/us/en/contact_us.html

HP forums
http://h30434.www3.HP.com/PSG/

----------------------------------------------------

Here is a troubleshooting guide comprehensive enough for any software related issues:

What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems). You said TrendMicro, all others already on the computer.

TrendMicro has been known to cause problems such as you encounter. See the following for message
methods of troubleshooting it.

----------------------------------------------------

Follow these steps:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

==========================================

After the foregoing:

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).

How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

===========================================

Vista and Windows 7 updated drivers love then here's how update the most important.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

===========================================

Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.

Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us

Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

Hope these helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • reading the media 11 guard freezing and setting player buffering

    MediMedia reading Player 11 maintains the gel and bufferinga reading Player 11 guard freezing and buffering

    Hello

    1. only it freezes everything by playing a particular song? If so, what is the file format of the song?

    2 have you made any changes to the computer before the show?

    Method 1: Run the following fix - it:

    Solve the problems of Windows Media Player video and other media or library:

    http://support.Microsoft.com/mats/windows_media_player_diagnostic/

     

    Method 2: The graphics card uninstall and reinstall drivers and see if that helps.

    See the following steps:

    (a) click Start, right click on computer.

    (b) click on properties, click on Device Manager

    (c) expand the graphics card, right click on the adapter option

    (d) click on uninstall

    (e) now go to your computer/device manufacturer site, download the updated drivers and install them.

      

  • KB915597 cause windows vista to freeze

    KB915597 for Windows Defender update causes Windows Vista to freeze.  At all times, I have to restart my computer for this reason.  And I can't uninstall Windows Defender because it is now integrated into Windows Vista.  In addition, I can not uninstall the update.  If ever I have to reinstall windows again and uncheck automatic updates, so I can make sure that this update is downloaded or simply live with the question until Microsoft fixes it.  Microsoft has released a fix for this error yet?  There is nothing wrong with my laptop because I just erased the hard drive and reinstalled vista.  I actually discovered this by accident because I reinstalled my operating system before but this freeze happening started and I thought it was a problem of Dell Update.

    http://www.PCWorld.com/article/226739/remove_windows_defender_as_long_as_windows_is_defended.html

  • Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

    Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

    It print a page of test very well and also printed from Notepad and word fine

    Scott

    Hi Scott,.

    (1) if it works well before?

    (2) remember to make changes to the computer before this problem?

    (3) what is the complete error message you receive?

    Method1: The computer in the boot and a test to see if you can print

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    If the problem persists, you can post your query on the Windows Live Forums for more expert help

    Windows Live Forum -http://windowslivehelp.com/

    Thanks and greetings

    Ajay K
    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows Vista 64-bit and button Support - Qosmio G30?

    Windows Vista 64-bit and Support Button?

    Hello buddy

    What do you expect now after writing this fabulous issue?
    Don't you think that someone will take you seriously?

    Just a tip: If you want to ask something to let people know what model of laptop you have exactly. All laptops are not supported for 64 bit Vista operating system.

  • I have Windows Vista Home Premium and I lost my product key!

    I have Windows Vista Home Premium and I lost my case with the product key to this topic! I really need help! Can someone help me?

    If the operating system is running - use Belarc Advisor to retrieve the key. www.Belarc.com

    If the OS is always installed, but inaccessible, you can still be able to recover, depending on what is causing the problem - come back with details.

    If you have reformatted, about maybe possible get the key - but unlikely.

    If the HD is dead, or you have crushed the old installation, then you are out of luck.

  • Trying to install a new installation of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes.

    win xp install

    Im trying to install a new install of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes. It worked early, when I hit enter to launch the cd? any ideas? TX marty

    Thank you! I tried what you mentioned, nothing has worked... I plugged a usb keyboard and it works, so I'm starting to believe it could be a motherboard problem. I finally got windows xp pro installed, no conflicts in Device Manager, all the drivers are installed and now running smooth. I removed the keyboard, and re-set, all connections look good, but still not good. the synaptics keyboard works fine and both rt & lft click the buttons. I pulled the ram to inspect it, it's the right speed, ddr2700, and after running for an hour, it was cold to the touch! I'll try to get a new keyboard and replace it, their pretty good work, if still not good it becomes pieces on ebay... lol tx again... Marty

  • I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

    I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

    Hello WillieBouma1,

    You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • I deleted my windows vista administrator account and lost the password.

    I deleted my windows vista administrator account and lost the password. Now I can't get the email or download anything because the user controls pop up window ask again me an administrator password, which I don't have. I need to create another administrator account and the password, but I can't do anything without a password?

    Hello

    If it is not applicaple, you need to reinstall the operating system.

    "What to do if you forget your Windows password"

    http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

    "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    See you soon.

  • Windows Vista Home Premium and try to install Adobe Flash Player 11

    Windows Vista Home Premium and try to install Adobe Flash Player 11 to play video news/sport.  Cannot install - can be found in the list of prorgams but no size data indicated so it does not seem to have downloaded?  Any suggestions?  Running Winows Vista on ACER 5735 laptop.

    Jim SharpPM

    Hello

    This can help you:

    Download and run the Flash Player uninstaller program.

    http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

    Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

    http://get.Adobe.com/flashplayer/?promoid=BUIGP

    If the problem persists, you may want to ask in the Forums of community Flash Player:

    http://forums.Adobe.com/community/flashplayer

    See you soon.

  • I am trying to activate windows vista Home premium and I give you the key that I have on the cd cover, but not activity

    can I buy new window vista Home premium and install, but same problem not activated and again once I buy Windows vista ultimate and install but I am facing the same peoblem I have no why it happens to my camputer

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
    Once saved, run the tool.
    Click on the button continue, which will produce the report.
    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

  • I removed Windows Vista 32-bit and Windows Vista 64-bit installed, but when I enter the key it says the key is already in use. How can I fix it?

    I have Windows Vista Ultimate 32 and 64 bit edition

    I bought Windows Vista Ultimate 32 and 64 in a box in 2008, I installed the 32 edition because at the time I was told not all software will work with the edition 64 a month ago, I decided to windows 7 Ultimate Via Amazon purchase which proved be a copy of the counterfeit money and Amazon me has now repaid , so what I do, well I could buy another copy of windows 7 Ultimate or I could give the other Version of windows that came in the same box with a product key a go, so I removed and formatted the hard drive and reinstalled 64 bit version on my drive using the product key original that I used on the 32-bit Edition for four years and when I try to register the 64 bits edition, that is to say someone else using this product key, you will have to buy another key or a copy of windows 7. Well, I decided to wait until Windows 8 will be released, that's why I decided to try the Vista 64 - bit Edition?

    Or better yet, I might switch to a Mac OS x system?

    The answer is not to buy Windows 7 from a dealer on the market of Amazon.  Stick to Amazon itself.  Amazon Marketplace is as eBay and other auction sites and online delivery.  It is composed of persons whose practices sales are questionable.  You won't get counterfeit product from Amazon itself.

    You have to solve the problem with Vista 64-bit using phone activation.

    Activate by phone.  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx

    Or click Start and type ' slui.exe 4.

    Do not answer all prompts automatic until it asks you if you want to speak to an agent.

    If you continue to have problems with activation, run the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool

    Once downloaded, run the tool. Click on the button continue, after a short time, continue button will change to a copy button. Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.
  • I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).

    I have a new HP computer and I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).  When you try to open an attachment, the bar downstairs quickly moves to the right, but never appears a dialog box asking if you want to open or save the file.  Error message I get when I try to resolve it with the suggested steps indicates "module"wintrust.dll"was loaded but the call to DllRegisterServer failed with error code 0x80070005.  I tried to do the same command prompt, but still not received the same error.  Thanks for help anything.

    Hi Paul,.

    Have you tried to download an attachment after you turn off your antivirus?
    I had a problem in the past where the system was performed at Trend Micro Internet Security and Web content filtering (I think that's what it was called) was preventing attachments from download.
    I would like to know what are your results!

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open.

    Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!

    original title: AutoPlay

    Hello

    You can fix the error in reading auto/AutoRun.

    AutoRun/AutoPlay does not work when a CD/DVD is inserted
    http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm

    AutoPlay - Autorun does not not under Vista
    http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

    Troubleshoot AutoPlay
    http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

    CleanHandlers - AutoPlay Cleanup utility
    http://WindowsXP.MVPs.org/autoplayhandlers.htm

    See this and also scroll the messages below.

    How to change the settings for AutoPlay Vista
    http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.html

    In the opposite direction might help.

    How to add entries customized AutoPlay in Windows Vista
    http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlay

    I hope this helps.

    Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!

  • I am currently using Windows Vista 64-bit and every so often Vista shows that this network adapter is spent in local mode.

    I am currently using windows vista 64-bit and every so often vista shows that this network adapter is spent in local mode

    I did several tests, including
    ping google.com
    to test if it is online and this proves that when its premises in sound mode now online
    I also entered the adpaper of netowrking and disabled so that nothing can turn it off energy saving
    my antivirus is AVG
    AND use zonealarm as my firewall program Please note even with disabled zonelarm it still happens
    can anyone help
    ?
    original title: network adapter shows onffline but it is online

    Hello

    You can try to uninstall and reinstall the network adapter.

    To do this follow these steps:

    1. click on Start, in the Start Search bar type device manager and press enter.

    2. in the list of devices, right-click of the network adapter, and then click on uninstall, if she invites you to completely remove the driver files, click ok to delete.

    3 restart the computer once the uninstall is complete.

    4. after the computer restarts, it will automatically detect and install the drivers.

    5. check if the problem is resolved.

Maybe you are looking for

  • Z30-A-1E9 recovery media from the satellite with Windows 10 or Windows 7

    Hi all I have a Toshiba Ultrabook (Satellite Z30-A-1E9). It comes with pre-installed 64-bit Windows 8.1 home version. Whenever after a successful recovery process, the cell starts to upgrade the operating system software to Windows 10. It takes a lot

  • Qosmio G45-AV680 hangs up when I try to insert a PCMCIA card

    My laptop is Qosmio G45-AV680 with Vista 32. When I try to insert any PCMCIA card on my laptop, my laptop hang up every time.I had to express card PCMCIA slot. When I use express PCMCIA card with PCMCIA card, my laptop works well. I try to chang Vist

  • CPU upgrade HP Pavilion dv6-6b50sa

    Hello world Im going to upgrade the processor (from i3 2330 m to i5 - 2430 M on) HP Pavilion dv6-6b50sa If possible Thank you

  • a hard drive in several configurations

    It seems that my hardware is working correctly, could well be my hard drive or operating system, but I can't tell. Here's the question. After that the POST is completed as soon as windows does, it freezes. Before the windows logo appears. It cannot l

  • Trying to get on Xbox Live using the internet connection in the hotel.

    I'm staying in a hotel until April, and I cannot lift the Xbox Live and running. I am able to connect and download content, but no matter what I do, I can not send messages or play games. I tried just using the Xbox built in wireless, using the comma