Windows Vista Home network

Similar Questions

• Windows Vista Home Basic Edition does not detect networks wireless scope.

  running Windows Vista Home Basic on my counter top and it will not locate wireless... period. I know at least 3 in the box and he is always telling me that there are no wireless networks detected.

  On a side note, I installed my router wireless on my laptop (so I know it works!) and have successfully installed on my desktop as well (or if the installation wizard tells me) the top round works on vista premium and office is vista home basic, but for some reason, the office is always telling me there are no available wireless networks. I went through the installation wizard for my router wireless twice now and still that it prove when I go to "connect to a network.

  As much as I know there is no 'Wireless' or switch to be turned on anyway... There may be a command prompt to enable the wireless function?

  Hello

  Have you been able to use the network without any problem on your desktop computer wireless earlier?

  The following articles might help you solve this problem.
  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Windows Vista Home Premium Service Pack 2 upgrade of the Atheros AR5007EG wireless network adapter

  I just bought a new device Sierra Wireless mobile hotspot, the Pro of the Sprint Overdrive.  The wifi connection works very well in my PC with the exception of a PC set that I am running Windows Vista Home Premium Service Pack two.  I am told that the problem is with Vista and the Atheros AR5007EG wireless network adapter.  The current version is 7.6.0.164 and it tells me the device Overdrive only with version 9.1.0.328 or higher will.  What I can, and if I can, how to move the driver to the required version?

  Hello

  You can try to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• Try to set up the network between Windows XP Home edition and Windows Vista Home Premium.

  I had a printer connected to a laptop with window vista home premium that I want to share with my other netbook with Windows xp home.

  two computers connected to a network via a router adsl modem to connect to Internet.

  I put the two WORKING groups on the basis of the same name.

  checked XP network places haven't seen vista pc, I had even impossible windows firewall.

  in Vista PC I put the

  ---> private network location

  ---> all in sharing and discovery are enabled

  I had the two PC but still do not see each other.

  So, what should I do?

  Please help, I don't want to move the printer, nor the computers here and there in order to print something from these two pieces, maybe more with different windows in the future...

  Thank you.

  Kind regards

  Michelle

  Hello

  Maybe this can help.
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot one

  Re just one example. Your list will focus on how your system is configured.

  ** Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows Vista Home Edition not accessible PC in network

  Hello

  I have Windows Vista Home edition installed on a PC. I shared a few folders on the network. I gave all security and permission to everyone to read and share share the contents of the folder.

  But when someone from the network wishes to access a shared folder on this computer by writing (\\abc-PC) in the Run dialog box, system gives an error "network path was not found".

  I disabled the firewall and anti-virus to this PC.

  Network is configured by a network of professionals expert. So no question of network.

  Some people said that this is a limitation of Vista Home, but I do not.

  Please help me.

  Thanks in advance.

  Thanks Krish

  Hi Krish,

  Work on a domain network?

  Make sure that the computer is turned on and that you have enabled file sharing and printers on your network

  Follow the steps mentioned in the link below

  Solve the problems - and printer-sharing files

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Make sure network discovery is on

  1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.

  2. If network discovery is off, click the arrow to expand the section, click turn on network discovery, and then click on apply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, see the link below

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Serscan.sys missing on Windows Vista Home Premium 64-bit when you try to install Office Jet Pro 8600

  Is there a place to find serscan.sys on a laptop Toshiba Satellite A305, running Windows Vista Home Premium 64 bit?  My Installer to connect wireless to a new HP Officejet Pro 8600 wireless all-in-one printer-scanner-copier-fax machine tells me to find this program, but I can't find it on my hard drive.  I received no installation CD of Windows Vista with this computer when I bought it new.  Any help in finiding or serscan.sys getting and get the printer installed and running is greatly appreciated.

  Hi Excompost,

  Follow the steps outlined in the document below. Let me know what you find?

  Installer Serscan.sys file not found when installing network

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• Is not start the BITS on Windows Vista Home Premium 32 bit service

  I'm unable to start the BITS service on my computer.
  I use Windows Vista Home preimum 32 bit OS.

  I tried the following solutions that I found here.

  (1) sfc/scannow
  Result:
  =====
  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32 >

  (2) delete the files qmgr0.dat and qmgr1.dat download/ProgramData/Microsoft/network directories.

  I also tried using BITS Repair tool downloaded from the microsoft web site, but no luck.

  When I start the BITS service, I receive the following error message.

  Please suggest me how to solve the problem.

  The service Background Intelligent Transfer Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Concerning
  Yannick DEVOS

  I tried to run the Norton removal tool.

  No luck.

  Finally, I reinstalled my OS. When I tried to restore using Windows restore, some applications do not work. Therefore, I have reinstalled my OS.

  Thanks for your great support.

  Concerning
  DeVos

• Windows Vista - unidentified network Local Access only tried everything please help

  Hello

  I have an Acer Aspire M1610 running Windows Vista Home Premium Service Pack 2 and 2 days ago when I turned it on the internet was not working and it says unidentified network Local access only. I use a wired Ethernet connection. I don't know how it happened as before I had used the computer as usual and the Internet worked very well. I did a lot of research and read a few forum posts about this problem and tried a few solutions but non of them worked. I tried the following:
  (1) disable my firewall and anti-virus who didn't work, I turned their back on immediately.

  2) press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type route delete 0.0.0.0 press ENTER.

  Type ipconfig/flushdns press enter

  Restart your computer.

  (3) the internet protocol version 6 clear, disable and enable the thing

  (4) if same Norton software removal tool I had uninstalled the when I got the computer I read that uninstall it by using uninstall windows is not entirely remove it.

  (5) another thing in the command prompt I don't remember exactly what it was, and I can't find the site Web is because I looked so much of.

  (6) I even reset my computer to factory settings and then uninstalled all unnecessary software and trials that come with and used the software again Norton removal tool.

  Does anyone know how to fix this? Any response will be greatly appreciated.

  Thank you

  Hi Alex,

  Have you tried to assign the IP addresses manually?

  I wish that refer you to this article-

  http://support.Microsoft.com/kb/928233/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Thank you.

• I have an Acer Extensa 5240 running windows vista Home premium. My Internet of Marvel Yukon connection seems to have disappeared!

  I can't access the Internet via my modem provided by my ISP. I went on the Acer site to find updates driver and downloaded the driver, but although it shows in the downloads, it does not appear under the options to connect to the Internet. I don't know why he just disappeared and if it is possible to get it back and working. I am Enternet Explorer 9 on Windows Vista Edition running Home Premium. Im not at all the tech.savy and would be really grateful if someone may be able to help solve this issue. I ran microsoft security scanner to check if I might have a virus, but it shows that I am not. I also run Microsoft Fix Center computer so downloaded Advance care system and still no desire! At one point, I got an error code 815 and something to say connections network - {ci\windows\system32\svhost.exc-k LocalSystemNetworkRestricted} maybe this might be a configuration problem? I have no idea and found no info on the Microsoft Technical support page either. Desperate resolve it! Any help would be greatly appreciated! Thanks Dan

  Hello

  1. don't you make changes to the computer?

  2. What is the full error message you get?

  
  Method 1: See the Microsoft site for internet connection problems

  Review the information in the site mentioned below

  http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-Internet-connection-problems.

  Method 2: Reference site Microsoft for network connection problems

  Review the information in the site mentioned below

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3: See the Microsoft Web site for this error

  See the site mentioned below

  http://support.microsoft.com/kb/923944.

  I also suggest you to see the Microsoft article mentioned below;

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• advocate for Windows for 64-bit windows vista Home premium

  Dear Sirs, I have a desktop DELL Intel Core TM) i7 CPU 920 @ 2.67 GHz 2.67 GHz memory: 6.00 RAM and 64 - bit system is vista home premium service pack 2 but no, this ADSL internet point is omitted some Francis but I use now temporloraly my laptop for Internet to download movies and adaptation by flash drive stick to my office broken that is internet connection does not work but other options work as movies big lcd screen display, but Defender does not work I want to fix or redownload my office which system is windows vista Home premium 64-bit.

  Plase help me because I use this desk top and it defender does not work and I am afraiding will be more damage will happen without defender.

  Best regards

  Selçuk Cetik

  E-mail address is removed from the privacy *.

  E-mail address is removed from the privacy *.

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  3. what type of Internet do you have?

  4. what happens when you try to access the internet?

  Method 1:

  Step 1:

  I suggest you to control in safe mode with network and perform clean boot.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3:

  What is the problem with Windows defender?

  You can't turn on Windows defender or you cannot update the windows Defender?

   

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Try to install Windows Vista Home Premium Service Pack 1, but says I have already installed

  I have problems of fixing a friends computer.  He is currently running Windows Vista Home Premium Service Pack 1 with the OEM sticker on the bottom with the key, but he lost the installation discs.  To help make repairs, I have a valid Windows Vista repair disc and the Ultimate Boot CD on two different USBs.  The symptoms are:

  Three addons will install successfully, I restart, and they are uninstalled back again.  The installed updates window shows nothing.  I have the CBS.log newspaper and the CheckSUR.log if you do not want to see them.  There are a lot of mistakes in both of these balls

  If I download service pack 2 manually and try to install it, it says I need to install service pack 1 first.  If I download SP1 manually and try to install it, it says I already have service pack 1 installed.  If I try to install KB947821 it hangs the first time 75% and crashes to zero then.

  The machine has problems with the .net Framework.  I noticed that programs seem to corrupt and the only way to fix it is to clean the .net Framework and reinstall it.

  The computer has recently been scanned with a full scan of Norton and no errors found.  There is no antivirus or active windows security options because I was trying to get the updates to install.  I'm in safe mode with network currently.

  Things I've done:

  I read a lot about this problem with a recovery partition.  My recovery partition was the flag of boot top, so I spent my drive main and then booted from the disk to repair Windows Vists the flag and ran the Startup Repair.  He set up the main drive of OS as the boot partition, but that does not solve the problem.

  In order to exclude any form of corruption of MBR, I wiped the MBR and ran the /fixmbr tool to restore the MBR.  This does not seem to help anything either.

  There is a tool to repair WIndows Update, called a "Microsoft Fix it." I ran this in normal and aggressive modes without change.

  Please let me know what information you want.  I tried it for awhile and I don't think I'll get it without help.

  Hi Jeremiah,.

  Based on the information provided (especially errors in the CBS logs), there seems to be several packages in Windows that are damaged or corrupted. They could become this way through several scenerios (3rd party program interaction causing files to be moved or deleted, antivirus software can make a mistake of components to update valid as malicious, or even malware infection). Currently, there are a few options.

  You could try manually repair all the packages that are in your CheckSUR report and then try to run the updates again.

  Perform a upgrade in Place to attempt to repair the components.

  Perform a clean installation to repair all the features of the operating system.

  All these choices are not the largest road to go down, unfortunately at this stage with the damage caused to your system, these are the few options left to fix.

• Can I make backup and system restore, my PC has Windows Vista Home Premium installed.

  I have Windows Vista Home premium installed, but it won't back up my files and I can't use the system & restore for some reason any.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  _______________________________________________________________________________

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I use windows vista home genune but system says it's not genune

  I use windows vista home, but system says its not authentic.

  Microsoft Genuine Advantage Diagnostic tool:
  http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results here: http://social.microsoft.com/Forums/en-US/genuinewindows7/threads

  Stuck key (error 0xC004C4A2):
  http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285
  "To check your PID press the key to victory and break at the same time, or system properties open via the Control Panel, scroll to the activation and look at It PID section will look something like this 54321-1234567-12345-067

  The part that you are interested in:
  Section three-digit on the product ID number, if it matches or is one or two digits
  the examples below, you probably have a MSDN or TechNet product key. "These keys must not be sold for retail use.
  065, 066, 067 068 for Ultimate,
  sector 220 for Pro
  230, 231, 232 area of award.
  There are probably others, but they should be close to those that are displayed"
  (Download the Microsoft Genuine Advantage Diagnostic Tool listed above).
  Also: http://social.microsoft.com/Forums/en-US/genuinewindows7/threads

  Note: Although sold illegally MSDN/TechNet product keys allow for the activation of several (usually 5 or 10).
  If these keys can be sold several times before activation may fail.

  = On MSDN or TechNet Product Keys - credit Andre Da Costa =.

  "About MSDN or TechNet product key
  They are genuine Microsoft product keys, they are in fact retail licenses, but it is expected for a product specific Microsoft Software Developer Network (MSDN) and TechNet channel for professionals who pay a subscription. The main objective is for evaluation purposes. The big thing to their subject, unlike Microsoft, MSDN or TechNet keys evaluation software expires. Because the agreement by virtue of which the subscription is provided is a single license, none of the software should be distributed outside of it. Although its $50,000 worth of licenses, it is for one person only for use and no one else. Unfortunately, no matter the conditions of license, people still abuse of the program, two key product gift or sell on auction sites. Microsoft it issues licences in good faith that customer will not do it, but I guess human nature win on.

  In your case, what has probably happened is, you bought a license MSDN key, which carries up to 10 activations unlike packed full of retail licenses which carry 1 activation. The person who sold it to you probably sold to 10 other people. Somewhere along the way, one of these people could have installed on a second system activated, because it went past 10 activation threshold, Microsoft has detected that he was abused and blocked the key for later use. »

  = Actions you can take .

  Chasing pirates: inside Microsoft's war room:
  The New York Times: http://www.nytimes.com/2010/11/07/technology/07piracy.html?_r=1&hp
  "AS the Sun rose over the mountains circling Los Reyes, a city in the Mexican State of Michoacan, one morning in March 2009, a caravan more of 300 heavily armed enforcement of law set out on a raid."

  R U Legit: file a complaint:
  complaints from consumers at 1-800-RU-LEGIT (785-3448)

  Reports of software piracy
  http://www.Microsoft.com/piracy/reporting/default.aspx

  Contact Microsoft: http://support.microsoft.com/contactus#tab0

  J W Stuart: http://www.pagestart.com