Windows Vista Home, profile connection failure

Similar Questions

• How can I connect to windows vista Home premium withou admin password

  How can I connect to windows vista Home premium withou admin password

  Hello

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Windows Vista Home Edition Pro CQ5110F, Disk Boot Failure, error BIOHD-2, caveat: no drives detected

  The Windows Vista Home Pro CQ5110F was Ok AM. and the afternoon once I turn on the PC, shows this info:

  Disk Boot Failure, Insert System Disk and press ENTER, (drive witch I do not have).

  Error code: BIOHD-2 and then WARNING: no drive detected.

  It is a Compaq Presario CQ5110F

  What is the best info; To solve this problem,

  Thank you.  REB of mich.

  Hi Mich,

  Seems your HDD fried upward.
  Suggest to contact Compaq and check out what they can offer.

• I have an Acer Extensa 5240 running windows vista Home premium. My Internet of Marvel Yukon connection seems to have disappeared!

  I can't access the Internet via my modem provided by my ISP. I went on the Acer site to find updates driver and downloaded the driver, but although it shows in the downloads, it does not appear under the options to connect to the Internet. I don't know why he just disappeared and if it is possible to get it back and working. I am Enternet Explorer 9 on Windows Vista Edition running Home Premium. Im not at all the tech.savy and would be really grateful if someone may be able to help solve this issue. I ran microsoft security scanner to check if I might have a virus, but it shows that I am not. I also run Microsoft Fix Center computer so downloaded Advance care system and still no desire! At one point, I got an error code 815 and something to say connections network - {ci\windows\system32\svhost.exc-k LocalSystemNetworkRestricted} maybe this might be a configuration problem? I have no idea and found no info on the Microsoft Technical support page either. Desperate resolve it! Any help would be greatly appreciated! Thanks Dan

  Hello

  1. don't you make changes to the computer?

  2. What is the full error message you get?

  
  Method 1: See the Microsoft site for internet connection problems

  Review the information in the site mentioned below

  http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-Internet-connection-problems.

  Method 2: Reference site Microsoft for network connection problems

  Review the information in the site mentioned below

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3: See the Microsoft Web site for this error

  See the site mentioned below

  http://support.microsoft.com/kb/923944.

  I also suggest you to see the Microsoft article mentioned below;

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• ____2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection? __othervise how?

  • I can't share internet and file simultaneously? If I share internet file sharing and disappear on the other PC if I share folder and run I can't share internet...
  • 2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection?
  • othervise how?

  Remote Desktop connection is not available in Vista Home: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.

  I need more info on how your network is configured to answer the question on the other.  How is the computer connected to the internet?  It connects wireless or cable to the router or modem or through ICS from another computer or what?  How do you change between the sharing of internet connection currently?  What happens when you try to enable both connections at the same time (or do not have two connections)?

  Thank you.  The answers above, I can be able to understand the problem, because right now I really don't know how you setup and I need as much information as you can provide about it.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• forgotten user password to connect to the computer that works with Windows Vista Home

  version Windows vista home my daughter composed of a password that she can't remember now, we can't access the computer.  How to enter and reset this password without factory default and lose all the images and files?

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Adobe Connect software component snap-in crashes when I try to share the screen in Windows Vista Home Premium (32 - bit) Service Pack 2

  The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.

  Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.

  Acrobat Connect Pro data sheet

  I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.

  It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.

• I can not connect on windows vista home basic desktop pc because of the former owner

  I can't log on to Windows vista home basic desktop pc because of the password previous owners is unknown

  Hello

  Try the following.

  Using another PC, download the app from the following link and save it in your downloads folder.

  PC login now

  Once the download is complete, open your download folder and double-click on the installer - this will result in another file, which is the disk image (.) ISO) you need to burn to a blank CD.

  Now, you will need to use an app like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When the disk has been created, shut down the PC you can not log on, press the ESC key as soon as you press the power button to access the Start Menu, insert the CD, select Boot Options (usually f9), use the arrow keys to select the CD/DVD drive and press enter - peut also have you to "Press any key" to boot from the CD if asked to.

  Follow the instructions on the guide here to remove the current password.

  Kind regards

  DP - K

• SP2 is unable to download after failure of computer with windows vista home premium

  My computer crashed and I restarted after the DELL factory settings is a Windows Vista Home Premium but I can't seem to download the SP2 so that I can get IE9. I have SP1, but when I try to download the SP2 it tells me to get SP1.

  Please do not mark a reply as the answer unless it responds to your question.

  It is what is in my previous answer to check what level of Service Pack you have installed.

  «Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64 bit installed.»

  It will also tell you which SP you have installed. »

  What does it there?

• Local tech installed Windows Vista Home Premium after a hard drive failure. However, my key is Windows Basic. Is the copy, he put on my system illegal?

  Genuine Windows clean install

  Hello

  I had a problem with my laptop Acer Extensa 5230th. It was not started and so I took for Matech computers.  They diagnosed as having a mechanical drive problem.  So they replaced the drive and installed a more recent version of windows vista on.  Note: I haven't bought a new copy of vista family premium, he said he was going to reinstall vista.  It had windows Vista Home Basic, it has installed vista Home premium and said that he had validated by call from windows, but I'm suspicious because I don't think you can use a base of windows key to validate Home premium!  It means that he has put on an illegal version on windows or used the genuine key that came with the laptop.

  In addition, on computers of brands, if this happens again, how is a technician for legally to reinstall the original windows that it came with the new hard drive? How to install windows vista basic on the new hard drive by using the original key to make it genuine? What windows installation disc would you require? or is it easier to just buy a new copy of windows?  I heard that many technicians, prefer to install illegal versions of cracking of windows instead of the customer to buy the new installation of windows.

  Kind regards

  Lewis

  Here are some utilities which displays product key Vista Matech used to activate Windows:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html

  Please do not post your key on this forum, rather checking to see if it matches the key on your laptop, I(Correction: "if it isn't') it will fall sooner or later"Non-genuine"that your key was for another version of Vista so what was installed.

  J W Stuart: http://www.pagestart.com

• Windows Vista Home Premium SP1 - multiple windows program or service failures after Windows Update June 17, 2011

  I have Windows Vista Home Premium SP1 (I think that SP1 anyway). Last night June 17, 2011, update of Windows installed an update or updates. Now, Windows Explorer, Internet Explorer, Windows Installer, Windows Sidebar, Panel, Windows Update and other Microsoft programs all fail. I get messages with various error codes. A message is 'class not registered '. I tried a restore to a previous restore point, but apparently the only restore point is the one made after the update. What can I do here? I know that I can always restore the factory image (Dell), but I'd rather not if I can help it.

  Hi doc,

  Method 1:

  You can try to repair aStartup if it is included in the system recovery options provided by the manufacturer of the computer or start from the disc for Installation of Windows Vista.

  Startup Repair: frequently asked questions

  What are the system recovery options in Windows Vista?

  Method 2:

  Alternatively, you can try to start a disk check and check.

  You can view the following link to perform a disk check:

  Check your hard drive for errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup of important data before you run checkdisk.

  Hope this information is useful.

• KB2296011 causes the blank screen in Windows Vista Home Premium?

  I'm troubleshooting an issue with an installation of Windows Vista Home Premium on a laptop. After Tuesday October 12 updates, the laptop goes to a blue screen after authentication with any account. There is a mobile cursor mouse, but nothing else. C/a. gives the menu, but "Start Task Manager" has no effect, restart will only work.

  I am able to login normally mode without failure. Remove the update KB2296011 removes the problem, I narrowed down it to only this update. It is now necessary to restart and use system restore to go back before this particular update to access Windows.

  I did the following to troubleshoot:

  (1) I tried to install the system update tool, which had no effect.

  (2) I tried to install the KB2296011 update manually after downloading, the problem returns after installing.

  (3) I tried to install the KB2296011 update manually mode without failure by another post here, but this is not possible, which gives the following error: "Windows Update Standalone Installer: Installer encountered an error: 0x8007043c.»  This service cannot be started in Mode safe. »

  It seems up to present have no way to obtain this update to install without the origin of the white screen issue. Please advice, thank you.

  OK, it looks like at this will be my last post.

  This technician seems to address the issue much differently from the rest. After the things we have done in my previous post, he seems convinced that the problem occurs when this security update is installed, it thinks it's UAC which is damaged, and possibly other files. If its resolution suggested the problem is to run a repair on Vista installation, in order to repair potentially damaged or corrupted files. This would correspond well with hijackware theory posted earlier, too.

  It seems door by another symptom not reported to me or noticed until now. With or without UAC enabled, standard users cannot connect. It passes the connection, in the preparation of your office for a disconnection. Administrative users can connect very well. As the primary user of the machine is an administrator (of course!), this was not noticed until I created a Standard user to test and found this problem.

  I hope than a repair installation (or even better, an upgrade, as I prefer to simply wipe the HD and start over) will solve the problem. The machine has 2 GB of RAM and a 2 GHz dual core chip, so I think it can handle very well (my wife does mobile) Win7.

  I hope that all of this novel, we have written here will help others as well.

• WIndows Vista user profile cannot be loaded

  Original title: error message when you connect using windows vista home edition saying user profile service failed to use the connection profile cannot be loaded

  second time display error message when the connection using windows vista home edition saying: could not load the user profile service doesn't have the profile of user logon

  Hello

  I suggest you follow the step below and check if it helps.

  Step 1:

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

• Can I make backup and system restore, my PC has Windows Vista Home Premium installed.

  I have Windows Vista Home premium installed, but it won't back up my files and I can't use the system & restore for some reason any.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  _______________________________________________________________________________

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Unable to start the center of security on windows Vista Home Basic

  I have windows Vista Home Basic and I can't get the Security Center to start. I get messages saying that I have worms and trojans in my system, but my AVG antivirus found nothing after a complete analysis of the system. These threats don't exist and how do I get the Security Center to start?

  Hello

  AVG can't find everything

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.