Windows Vista not install sp1 with 0x800F0826 error
Hi, I currently have a Lenovo with Win Vista Buiss and trying update my windows vista SP1, so I can move to 7. However, he retains in default and I get this error 0x800F0826. could someone please help and advise me how to install SP1.
I have all ready tried the two automatic update in the way and the average manule. However, I now get this error.
Hi, Azamp,
Windows Update error 800f0826
http://windowshelp.Microsoft.com/Windows/en-us/help/2d96561c-0a7a-492a-b48f-8317cf4f1fde1033.mspx
Indicates a previous update failed to install and additional facilities prevent the updates. Only affects the Windows updates.
Open Windows Update and review your history.
Locate the update/s that have failed to install (you can see more information on the update/s failed by double-clicking the update)
If the information reveals 800f0826 move on the following, until you get the update that displays a different error code of 800f0826.
Once you have located the update that failed and caused the problem, so that must be fixed before you can install other updates. -Taurian, MVP-
Tags: Windows
Similar Questions
-
Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R
Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.
Hi Alan,
Thank you for visiting Microsoft Community.
To resolve the problem with the installation of the updates, follow these methods:
Method 1:
See the article and check if that helps:
Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates
Method 2:
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up the registry, see the link:
Back up the registry
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
I suggest that you follow the steps described in the article and try to reset Windows Update components:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.
-
Windows Update loops round and round constantly to not set up correctly, then restores the changes
Do I need to install the System Update Readiness Tool KB 947821?
Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.
Given that this problem is after a fairly recent install of SP2...
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this="">=pick> ).
In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":
1. stop the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > Right click on run , and then select run as administrator >
(type or copy/paste) %windir%\SoftwareDistribution > [OK]
Open the download folder and delete its content
Close the window.3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update | View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.
4. start the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click Start
(Stopping the service will take a moment)=====================================
To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
* Title *.
An error occurred during the installation of assembly ' Policy.8.0.Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32-policy", publicKeyToken = "1fc8b3b9a1e18e3b" processorarchitecture = "x 86". See Help and Support for more information. HRESULT:0 x...I tried everything that you guys mentioned here http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/windows-7-unable-to-install-itunes-an-error/1099136a-03df-4da4-966c-5a4e56b8f202?page=1&tab=AllReplies&tm=1318189137621 but I do not have
file of the registry size limit.I also tried these solutions http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/an-error-occurred-during-intstallation-of-assembley/7a2c7cfd-1e0f-40c4-bf96-896134ecda51?tm=1318188952925, but I still have an error during the installation of Microsoft Visual C++ 2008 Redistributable Package (x 86). Error is:
Error 1935
"Microsoft.VC80.ATL.type ="win32".version ="8.0.50727.4053".
"publicToken ="1fc8b3b9a1e18e3b.processorArchitecture ="amd64" '. I tried with Microsoft .NET Framework, but it does not work eather.
I try 2 days to install itunes without success...
Any help, please?
Run the SFC/scannow using the Administrative Mode command prompt
Attempt to open the CBS log
Open Run - type the following and press OK
%windir%\Logs\CBS
Look for entries stating can not repair and note the file name
If it does not repeat the steps listed in my previous post to open the CBS log in Notepad
Startup Repair - analyzes your installation of Windows Vista for issues and fixes
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
-
Windows vista not install updates, how can I solve this problem
I took my computer compaq running on windows vista & my windows updates will not install what can I do?
I have been working on this since April too and may not know how to solve this problem. Last update was in March. I used the MicrosoftFixit.wu.MATSKB.Run with no luck. He says that he can not solve the problem and leads to a MS web page, which doesn't help. I also stop the update services and several DLLs and then restarted them without success, according to a website of windows troubleshooting. I am not prepared to roll back, nor do I want to reload the operating system. If I do that, I'm going to Linux.
-
Windows Vista not installed or configured wireless adapter.
In windows Vista, after a new new installed, I can connect is the internet.
Windows cannot find any networks to connect, if I can connect to internet with my other computer.
When I ask to "Diagnose why Windows cannot find any network" he said that this computer does not have an installed and configured wireless network adapter.
The wireless worked well until I reinstalled windows.
I could use another computer to download all software/drivers related to WIFI from the Web from Toshiba site after entering in my specific computer, and I installed it all. This solved my problem. Thanks for the help.
-
After trying to install windows vista service pack 1 allows you to restart, and then freezes on! 0xc0190036! 2539/98170 now DSOUND.dll missing and several dll files are missing can not display pages on the internet now
How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791/Learn how to install Windows Vista Service Pack 1 (SP1)
http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspxLearn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspxHow to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366 -
Update for Windows Vista 64 b failed with the error: 80070005
Update windows 64B is now impossible because I see an error code 80070005. I tried to work on my admin account, but even who could not fix this update. On the internet, I've seen a lot of questions unanswerd (UAC) for a problem like this.
The following things could not solve the problem:- Tune up utilities
- Availability of system updates tool
- fix Microsoft (search for problems of sound and WV64 update)
Another problem maybe caused by the present is: there is no sound on the PC.
who knows the answer?The update works again! I downloaded everything manually. Thnx
-
I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)
About Vista, but is not https://forums.adobe.com/thread/1836232
-
I can't seem to install SP1 with Vista Home Basic and receive the error code 80073712.
I can't install SP1 with Vista Home Basic. I get an error code 80073712. I tried to install the system update readiness tool and it tells me that my system does not apply to it. I know that I must have a file corrupted or damaged somewhere but don't know where. I'm confused. Can someone help me?
Moved from Vista to install, upgrade and activate Forum.
Original title: installation of SP1
I know that I must have a file corrupted or damaged somewhere but don't know where. I'm confused. Can someone help me?
Donald,
The computer belongs to you or your employer?
(When was the last time you checked your system for malicious programs?)
In addition to using an anti-virus, as Malware/spyware scan:
http://www.Malwarebytes.org/products/malwarebytes_free>
(MBAM) Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
In addition, scan with the free Version of (SAS)
http://www.SUPERAntiSpyware.com/onlinescan.html>
`~`
Click Start type cmd (you should see the command prompt fill up) right click and select run as administrator.
Inside the command prompt, type sfc/scannow
* Information about the System File Checker
http://support.Microsoft.com/kb/929833>
Reset
`~`
Run the link Fix It, you will find on this http://support.microsoft.com/mats/system_maintenance_for_windows/en-us>>
`~`
If no malware has been detected, then please download and Save the tool update system (or CheckSUR).
http://support.Microsoft.com/kb/947821>Be sure to download the version of the tool that fits the computer architecture. If you don't know what it is, then click on the link under
http://support.Microsoft.com/kb/827218/en-us>
When the download is complete, please read this before you run CheckSUR.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135>Once you have configured and rebooted the system to clean boot state, run CheckSUR (. Windows6 0-KB947821-v10-x 86.msu or)
Windows6.0 - KB947821-v10 - x64.MSU) with the system connected to the internet. It will download and try to fix the incompatible component store.NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled.
Open Control Panel > firewall Windows to check the native Vista Firewall now on.
When CheckSUR finishes running, restart the computer.
See if it can be updated now by opening Windows Update in Control Panel and clicking on the link to check for updates in the left frame.FYI
If the tool (Checksur.exe) system update solves the problem, you will need repair Windows.
`~`
The time and date of this moment in British Colombia, Canada is 01:05
Friday, February 14, 2014
Pacific (PST) - 0800 UTC standard timeUTC/GMT is 09:05 on Friday, February 14, 2014
Current weather conditions in VancouverCloudy43 ° F / 6 ° C -
I can't install windows vista SP2 and problem with SP1
So I installed SP1 with windows update and each update, it says service pack 1 in the list of installation. Second problem, I downloaded the file for SP2 and when I open it it just comes up with the error message "these data are incorrect."
Hello
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
It will also tell you which SP you have installed.
Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.
Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
See you soon.
-
I've seen comments on this more soon but I can't find the discussion now.
-
Windows do not install display error c1900101-30018
Original title: windows 10
Why windows do not install display error c1900101-30018
The phase "Installation drivers and features" is the most delicate part of the upgrade. If you see a c1900101 x300xx failure, it means that we have failed in this phase. The most common failure is x 30018, which usually means a driver crashed when we there for the first time. Any driver can cause failure, but he can't block 100% of the time. If you try again, it may work only.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
After a horrible experience with the upgrade of Windows 10, I re-installed Windows 7 Pro and had to reinstall all my programs. When I try to install the retail DVD of Lightroom 6 version, I got and error message that Lightroom does not support the Vista operating system. This is NOT Vista; It is Windows 7 Pro x 64 SP with installed updates. Installation stops there and will not continue! I then reinstalled my old version of Lightroom 5.2 (who has updated to 5.7) without problem. How can I bypass the installation process that incorrectly detects Vista?
Thanks for any help you might be able to give me. I really miss my 6 LR!
Hello
Try to force ambient light Setup to run in Windows 7 mode:
Right-click on the Setup file and select Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
This link can also help: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported
-
Hi all
I hope you can help as I'm going crazy! It's my first MAC if im a complete noob.
Me being lazy has decided to download Windows Vista Home Basic SP1 from https://emea.microsoftstore.com/UK/DesktopDefault.aspx/tabid-2/ site
It contains 3 files which I had to download separately:
Vista_HomeBasic_SP1_32bit_English_Download_Part1_66G - 02017.exe
Boot.wim
install.wim
Once I had downloaded these. I pulled the top of VMWARE AU12EME 2 but could not detect anything. If I then wacked out on a memory stick and ran the .exe on my windows pc. This integrated then all the files I downloaded a good big folder of Vista.
So once again I pulled up to VMWARE fusion 2.0 but still nothing. I don't know what I'm doing wrong. I heard people talking that I need an ISO file? But I searched all files that I downloaded and installed, and there is nothing similar. The only thing I can think is that I need to burn the VISTA folder I extracted from my pc to DVD and try running disk on my Mac. But that would make a difference that I tried to run from my DESKTOP MAC key and memory? In addition, there is no ISO files.
Please HELP I'm worried that I just lost my money!
I did a little research, and it was one of the best hits on How to make Vista DVD bootable with WIM downloaded files that I think sums up your situation.
Because I had the file oscdimg.exe since Install Kit automated (Windows AIK) I gave it a try and it worked. In other words, by using the folder of Vista and its content that has been created by you run the files you downloaded you should be able to create a Bootable ISO Image, which you can then use to create a DVD, if you have the right software to burn an ISO Image on DVD. (Maybe you could do this on the Mac) Although if you want to you have even burn the ISO Image to DVD just copy it on the Mac and assign it to the CD/DVD in the settings of Virtual Machines.
Other documents you may find useful: Microsoft TechNet > TechNet Library > Windows > Windows Vista > Windows Vista technical library Roadmap > Windows Vista: deployment > Kit to install Windows Automated (Windows AIK) > Deployment Tools Technical Reference > Command - line Tools Technical Reference > Oscdimg command-line Options
Just to let you know that it took me about 20 minutes to do a search on Google and create the ISO Image and the test that I could start a VM in the Fusion and if you need to download and install the Windows Automated Installation Kit (AIK) to get the oscdimg.exe file it obviously will take you a little longer, but it is doable and the solution vs safer trying to get the file oscdimg.exe or cdimage.exe from a link sent illegally into the file.
In any case the information presented here can solve your problem of creating a Bootable Image DVD/ISO.
HTH
Maybe you are looking for
-
What to do with duplicate files?
Hello. I recently installed "Disk Clean Pro" and run "find duplicate files. Most of the records found have recognizable names and so I can easily decide if they should be "cleaned" or not. However, a lot of files is a string of alphanumeric 40 who ha
-
So I have the latest version of Skype. And more precisely when I connect to my Skype account, it remains connected for maybe a few seconds or more and disconnects me just here and. I try once more, but continues to be the same thing. My cousin use Sk
-
Upgrading power supply on HP Elite 7500 to install radeon AMD 7850
Hello I really hope that you can give me some advice. A friend has an HP Elite 7500 and just bought a Radeon 7850. I had a peek inside. I'm a little nervous with microtours so I just wanted to check a few things. The PSU needs to upgrade to at least
-
SimCity societies on Vista 64 bit? ___
Will/how can I socities simcity to work on my computer? For the moment I click on the desktop icon and it starts to run... wonder approval then... NOTHING... HELP downloading seems to go correctly, and I was able to download and play a demo version
-
I have win7 hav, double heart 2 (2.6 GHz), 2 GB of ram, 80 GB hard drive...