Windows Vista reset time

Similar Questions

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Accidentally installed windows vista 2 times

  Can Hi you help me please? the problem is that I tried to restart my laptop now, it was my first time doing that so I found 2 CD that came with my laptop. The problem is that I put in the wrong CD and accidentally installed Windows Vista again on the (d :)) thinking to myself it will be re - boot my laptop in the car.) Now I'm sure that in every computer/laptop, all files, programs and software be saved on the (c :)) drive, but now that I have installed Windows Vista again on the (:)) d car, everything is saved on disk (d :)).) () That I don't want to). Please can someone tell me how to remove this 2nd Vista Windows Vista so then I can start reusing my drive (C :). Please can someone me help... really urgent.)

  Hello Naeem237,

  Thank you for your message.  Looks like you have installed on your recovery partition.  Please see Andre post and follow her advice on the thread HERE regarding the suppression of the 2nd install.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error trying to save Windows Vista each time

  Please help me to get a backup copy! Get an error and it does not backup. Any suggestions? David Baumgardner

  Please help me to get a backup copy! Get an error and it does not backup. Any suggestions? David Baumgardner

  Hey davemaninohio

   
  you don't say what the error is how you try to back up or where you try to save up to
  you need to back up on an external hard drive or DVD
  read the tutorial below
  http://www.vista4beginners.com/how-to-backup-your-data

  Walter, the time zone traveller

• Update error 80070643 - Cumulative security code for internet explorer 7 for windows vista

  Hello - I tried to download the update of Cumulative security for internet explore
  7 for windows vista 6 times now and they all failed

  To read the messages, 80070643 is a generic code.  I tried

  to restart the Office Source Engine (OSE) service & no luck is.  Any
  assistance you can provide would be greatly appreciated.

  I have vista home basic Windows, 6, 32-bit version operating system.

  Thank you very much...

  Sharon1124

  Hi sharon1124,

  Follow the steps mentioned below:

  (I) read the article
  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update Web sites to install updates - http://support.microsoft.com/kb/958052

  (II) follow the article to reset the update components:
  How to reset the Windows Update components? - http://support.microsoft.com/kb/971058

  (III) disable the security software

  (IV) try to download the update manually and install it.

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• I can't connect to Windows Vista. Only 1 user account. Tried Safe Mode. No luck. How can I unlock and find my admin password

  Ideas:

  • Vista; Open a session cannot connect
  • None
  • The Point System Restore, Safe Mode, tried to find the file corrupted mode safe "regedit." She appears when in safe mode when I delete the information and I restart the computer, it reappears, so it is not deleted

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this - use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
  Then fix the password in your usual account. Do not forget to leave your account administrator if you
  wish.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  ---------------------------------------------------------

  If necessary:

  Ophcrack is a free Windows password cracker based on rainbow tables.
  http://Ophcrack.sourceforge.NET/

  How to reset a Windows Vista - Trinity Rescue Kit method - password password reset disc - burn the ISO
  http://www.WikiHow.com/reset-a-Windows-Vista-password
  YouTube video on the use of the Trinity rescue Kit
  http://www.YouTube.com/results?search_query=Trinity+rescue+Kit&search_type=&AQ=f

  Reset your forgotten password the easy way using the Ultimate Boot CD for Windows
  http://www.howtogeek.com/HOWTO/Windows-Vista/reset-your-forgotten-password-the-easy-way-using-the-ultimate-boot-CD-for-Windows/

  Offline NT Password & Reset Editor
  http://home.eunet.no/~pnordahl/ntpasswd/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error installation software device driver for removable devices in Windows Vista x 64

  I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.

  When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.

  I select the recommended option: "locate and install driver software.

  I click 'Continue' when Windows asks me permission to continue.

  Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.

  Then another window pops up saying this:

  "Found New Hardware - device unknown".

  Windows encountered a problem installing the software driver for your device

  Windows found driver software for your device but encountered an error trying to install it.

  Kodak

  An error occurred during the installation of the device:

  The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.

  For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:

  "Windows needs to install driver software for your USB Flash Drive", etc...

  'Install the device driver software', 'USB Flash Drive search Windows Update'...

  Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.

  Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.

  I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.

  If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.

  I know it can be frustrating to solve problems.

  (A) was this post or hibernation sleep?

  Microsofts troubleshooting KB

  http://support.Microsoft.com/kb/928631

  (B) the bios settings

  First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer

  It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.

  Plug n play OS on conscious

  could help Vista automatically recognize your USB

  (C) what version where do you use? SP1? or gold?

  (D) USB hubs may cause problems just be hubs. Power connected?

  (E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?

  Hope something here helps

  Keith

• How to make wmp works as it is on windows vista?

  Original title: windows media player on windows 7

  IM used to use windows player media on windows vista.that time, if I reduce windows media player would show the widget to the right of my taskbar. While it contains button in wmp

  now in windows 7, a little different. Windows no more minis, but windows just square as an another program.if I drag my mouse pointer, the button appears but not the volume meter

  How to wmp does work as it is on windows vista?

  The "deskband" Windows Media Player toolbar has been removed.  You can always adjust the volume with the volume icon near the clock.

• How can I reset the time and date on Windows Vista?

  How can I reset the time and date on Windows Vista

  http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html

  http://www.Vistax64.com/tutorials/114989-date-time-change.html

  Read the information in one of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to access computer because the account password for Windows Vista has been forgotten and don't have a password reset disk/hard to find ways to restore the system... Help please

  Hello
  I'm stuck on the screen on my computer for my Windows Vista Home Premium 64-bit edition. The password to the user account has been lost, and now I am unable to access my computer. I don't have a created password reset disk so I can't reset the password. I searched these forums and seems the most effective way is to run a system restore to a time where I did have a password for my account. Fortunately for me, I did an automatic update of Windows that created a system restore point literally moments before I put the password, so I should be able to get access to my computer once I figured out how to get system restore to work. The advice I found on other forums do not seem to work, because I'm in my Windows vista operating system disc, but no screen is coming up with 'Repair your computer', which indicate the steps happen. I need assistance to find another way to run the system restore on boot menus/Vista/DVD CD. Thank you.

  Go to Bestbuy or other PC shop. They can fix it for you. (Could I have so I am not allowed to post these alternative instructions.)

• Update for Windows Vista Service Pack 1 offerred repeatedly; have installed 4 times.

  Original title: vista service pack 1

  just reinstalled vista and sp1 only installs sound always on windows updates and I install it says his successful but while he appears again ive done four times now, and it is said in the history of the update I have four time but I know that its not install as its quick access

  I have will have to sp2 as well but can't get that until I get sp1

  Hi Joy,.

  Let us work together to solve this problem.

  During the installation of Windows Vista SP1, this problem occurs when a third-party application holds open a file or locks a file that the Service Pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. I suggest you temporarily uninstall any antivirus software and check if you are able to install the service pack. Please do not forget to reactivate once the process is complete.

  Method 1: Alternatively, you can reset Windows Update components.

  How to reset the Windows Update components?

  Method 2: I ask that you download and run the system update readiness tool and check if you are able to install the service pack.

  The system update tool

  Registry WARNING: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  Method 3: I ask you to install Windows Vista Service Pack 1 Standalone Installer, in clean boot.

  Step 1: download Windows Vista SP1 from the link below depending on the Type of system:

  Windows Vista Service Pack 1 for Windows Vista 32-bit (size: 544,3 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 873,0 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&displaylang=en

  Step 2: Save the file on the computer and install it in the boot. Please refer to these steps to learn how to:

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

   

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.

  Please get back to us with the State of the question.

• How to completely reset my emachines computer you use windows vista, back to factory settings

  you try to reset my husband (my old man) a computer to factory settings, I have the disc that came with it.  But it asks where you want to install windows?  And I do not know which of the two options to check.  I want to completely rest the whole damn thing! to the factory settings.  I need first of all go to computer and reformat the drive c and d both and then go into the installation disc and then install or what?

  Hello

  Please ask this question throughout these Forums of Vista will stop you.

  For moderators, please merge:

  http://answers.Microsoft.com/en-us/profile/f750afd8-9B40-4FF7-8911-be843623ef83

  You answered no to the support offered to you in one of your other Threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/if-i-do-a-clean-installation-of-Windows-Vista-will/4a4a1fce-c7f0-4ECE-b406-d11f3140cc7b

  And this is the first time you mentioned it is an eMachine and you have a recovery disk.

  You should normally install windows on the C: partition, but we don't know how he put up with the installation on the eMachine recovery disk.

  eMachine belongs to Acer and Acer used to put in place their hard disk with two partitions + a hidden recovery Partiiton

  Please contact eMachine support at the following link for the exact way to use their recovery software.

  http://www.eMachines.com/EC/en/us/content/home

  See you soon.

• Update security for Windows Vista for x 64-based systems (KB2556532) installs several times

  Since 01/12/2012 updating security for Windows Vista for x 64-based systems (KB2556532), maintains the resettlement on my system through Windows Update.
  Whenever it says updated successfully, then update windows says that it is impossible to get updates. Said update was last updated 12/01/12.
  Evry time I reboot, this updated, re - installed.

  Hello

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to reset components to update Windows from the following link.

  http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists, then try the steps from the link below.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

• Windows Vista will not synchronize with internet time server

  I am running Windows Vista Business SP2 and Norton Internet Security on a Lenovo T61.  All updates for Windows, Norton and Lenovo have been applied.  When I try to synchronize with a time server Internet, I get the error message ' year error occurred while synchronizing with time.windows.com "I tried each of the other servers listed time and still get the same error message.  I spent reviewing the configuration of the firewall in time of Norton Internet Security and S32 and port 123 are enabled.  I tried to synchronize with the two Norton Internet Security Firewall on and outside, with the same results. I have internet google and looked for a solution of Microsoft.  After reading all the posts relating, I tried the following:

  running administrative invite

  net stop w32time

  w32tm /unregister

  w32rm /register

  net start w32time

  Each performed positively.

  This has not solved the problem.  I then ran:

  w32tm/config /update

  This is performed in a positive way.

  This has not solved the problem. I then ran:

  w32tm/Resync /rediscover

  He responded with "the computer did not resync because no time data was available"

  I then ran:

  w32tm/query/status

  He responded with "last successful synchronization time: not specified.

  The local Group Policy Editor reads for providers of Service/Computer Configuration/Windows Administrative Templates/time/system time

  Configure Windows NTP Client not configured

  Enable Windows NTP Client not configured

  Enable Windows NTP server not configured

  In summary, it seems that my computer has never synchronized with an Internet server time.

  If you need additional information, please provide specific instructions on how to get it and I will provide.

  From time to time, I checked to see if I resync of internet time.

  Out of the Blues started windows resynchronize.

  The only change I can think is that AT & T reset head of communications AT & T defaults shortly before he started work.  This tends to confirm my opinion that it was a problem of communication.

  PROBLEM SOLVED!

• Is it useful to reset my Windows Vista Home Premium?

  He is three years old (he got the summer three years ago) and it is moderately-heavily used, as in, it is used every day, and there are many programs and files downloaded and installed I do not use. Through my computer and delete all of these files would take much more for a long time that simply reset and its replacement by backups.

  My computer is idle or, at least I think, however, I was maybe just more patient three years ago.
  In addition, please don't suggest you get a new computer, or to download a program to uninstall other programs for me, because my computer spastic and these programs tend to crash.
  Ah, Yes, that's another question. Some programs that I want to use more (Skype, Apple Software Update, RegClean, etc.) crash as soon as I opened the, and there seems not to be an error with the program, because I posted on other forums vain.
  So, is it useful to reset my computer? I can do that easily, it will take little effort. Basically, I want to say it's worth it, is, she will fix these issues, such as the opening of the program slowly and crashes random application? Thanks in advance.

  Hi MitchellKager,

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also see the following articles for more information about improving the performance of the computer:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

   

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  I hope this helps.