Windows vista service pack 1 did not install correctly

Similar Questions

• Windows Vista Service Pack 1 will not install.

  My computer tried to install Vista SP1 since April 09.   I have a Toshiba A215-S4757.  Other updates install w/no problem.

  Hi Subtru,

  Thanks for choosing Windows Vista community.

  1. can you send us the exact error that you get when trying to install Service Pack 1?

  2 have you tried to install Windows Vista Service Pack 1 from Microsoft Download Center?

  3. is this a Vista 32 bit / 64 bit?

  First of all, check that your software has been installed using the correct product key. If an incorrect product key may have been used, try to update the product key and you try to post again. To update the product key, try to validate the software by visiting the following Web site:

  http://www.Microsoft.com/genuine/validate/?displaylang=en&sGuid=6530f023-54f6-4c7f-9a06-c20cb2fdda49

  Select valid now.

  Download the standalone version of Vista SP1 package from the link provided and install mode without failure.

  Proceed to method 3 in the link below which shows how to get the latest pack of service Windows Vista from Microsoft Download Center and download the Vista SP1 standalone package

  http://support.Microsoft.com/ kb/935791

  Steps to start safe mode:

  1 restart your computer and keep pressing F8 before the Windows logo appears. |

  2. on the Advanced menu select Safe Mode and press ENTER.

  3. Once you start to move forward on the desktop in Mode safe mode and install SP2.

  You can also go through the link below indicating

  What you need to know before you install Service Pack 1

  http://support.Microsoft.com/kb/936330

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this is useful and I would like to hear from you.

  Kind regards

  Support of yama - Microsoft.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Service Pack 1 will not install. -It says "cannot install, change recovery."

  I recently installed windows Vista Home Basic on a hard nine. I want to install sp1, but after long hours of reboot and installation, step 3 of 3, it says "cannot install, restoration of the changes." subsequently, an error message appears indicating that an .exe file (it started with MNT) is corrupted. I was able to remedy this through the command prompt (chkdsk) but I want to know how to install sp1. I ran an sfc scan result were he finds files corrupt, but he couldn't fix it. I then ran the option upgrade from vista startup disk and sfc shows that there are corrupted files. The newspaper did not show all corrupted files sfc was not able to solve. I ran sp1 install from both standalone and windows update. I chose the option the first time and the second time, I shut down the computer and booted from safe mode.

  Thank you for your time and your help.

  Hey Joe,

  You install Windows Vista SP1 by using the stand-alone package or by using Windows Update?

  I suggest you try the steps from the following link:

  Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Windows vista service pack 1 will not update. I get Error 80070002.

  Vista - install a drive - error 80070103

  I am trying to install a disc and it says I have error 80070103

  I am trying to install a disc and it says I have to update my computer and my windows vista service pack 1 will not update because I get the Error 80070002

  Hello

  See if that helps you.

  "Windows Update 80070002 error."

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  "If you receive the error Windows Update 80070002 of updates, you must delete the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try checking the Windows updates again. »

  And this Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Vista service pack 3 is not installed

  Vista service pack 3 is not installed

  There is no Vista Service Pack 3.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows XP Service Pack 3 is not installed because of a missing file beetov9

  Windows XP Service Pack 3 is not installed because of a missing file beetov9... What can we do?

  See if aid that I pasted here from previous messages and noted the reference material.

  KrisT2 has a solution and gbhall was also a solution that can help you.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/351ca845-3df8-4C9F-B456-fbedf0abfa8a

  "When the 'beethov9.wma error' rises (about 1 1 / 4 h. in the update),
  Open Windows Explorer and navigate to C:\Documents and Settings\All
  Users\Documents, then right-click on Documents and make appear the properties, then
  the sharing tab check the box "allow network users to change my files '.
  You don't have to be logged on as administrator. Retry the copy. That's it - I
  don't know why either of you, technology experts could not have said it simply. »

  / KrisT2

  Other-

  This is a known bug 'Dumb MS' and very simple to fix. It is simply that the installer wants to put a bit of a music (the standard windows sound) file in a particular place, and the directory does not exist on some copies of OEM Windows XP home.

  You just need to create the folder he wants before rerunning the SP3 update. Not at the moment, I can't find a link to the exact thing, but if these directories do not exist, create them. You must be logged on as administrator user to do this.

  The file beethoven.wma wants to be in the folder "C:\Documents and Settings\All Users\Shared Documents\Shared Music".
  OR maybe "C:\Documents and Settings\All Users\Documents\My Music\Sample sounds\" on XP-Home Edition

  However, the "All Users" directory down may be missing or not have NO defined permissions.
  To fix it, right-click on "All Users" and click the option 'security '.

  Click on the security"" tab.

  Click on "Add..." »

  Click on 'Advanced... '. »

  Click on "search".

  In the list below, to select multiple click (Ctrl-click) to select:

  Administrator
  Directors
  "Your username".
  Click ok all the way out and try again.

  Last edited by gbhall; http://www.TechSpot.com/VB/topic127254.html 09/05/2009

• Windows Vista Service Pack 2 (KB948465) not __will not install - constant judgment of Internet Explorer

  I couldn't after several attempts to install Windows Vista Service Pack 2 (KB948465).  I finished all of the instructions that will appear on the screen to fix this problem and nothing works.  I'm not a PC geek and want just to get this update loaded.  I hope that this will solve the constant stop my IE WHENEVER I use it.  I'm at a point where I want to just remove Vista and go back to XP.  I NEVER had a problem with it.

  Please contact something that can do a non-techie.  I look at all these forums, but I don't really know how to do all this.  So, unless there are instructions step by step, I'm a lost soul.

  Thank you

  Scappi

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step # 1 above and select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  5. right-click on the file that you saved in step # 1 b above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then reboot again.

  6. do a clean install of Norton Internet Security 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  10. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• For Windows Vista, Service Pack 1 will not completely install.

  On Windows Vista Home Premium, 32 - bit system, trying to update Explorer 7, that no longer works, to Explorer 9, which requires SP1 (KB936330) and SP2 as required components.  I use Windows Update method, Guard sent me with Service Pack 1 (KB936330) to update.  However, I do, and then he said it will take about an hour and do not use my computer.  I do this but in a few minutes 'complete' and said "completed successfully."  I have now more than a finished SP1 (KB936330) entry on my page in the history of the update, BUT does not appear under installed updates, so it seems that's not install completely.  Why?  How should I fill this out so I can go on installing SP2, then Explorer 9?

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Windows vista service pack 2 (KB948465) cannot install

  OK my computer went more slowly in a couple of weeks to the point where it would crash a lot. So what I did to restore the computer to do it how I bought it. I guess I did the settings are correct and it became much faster, but I realized, he became also double as slow as before.

  so I tried to install all updates but they keep on do not install. so now im trying to install the windows vista service pack 2 but when im trying to install the stand alone I download it says I have to install windows vista SP1.

  I cheked the computer system and he said he already has SP1.

  but I keep trying to install SP2 and it keeps showing that I have to install SP1. so I downloaded the SP1 and tried to install it but says that its already installed.

  My next step was to remove the update of the system and so I did. then I restart the computer but he repeated that SP1 is installed, then I tried SP2 and continues to show that SP1 is missing.

  If it's like a game of back and now I don't know what can do to fix my computer. Its really very slow. I can't watch my movies or just use the internet cuz I have to wait that the computer crashes, I can't even open two windows or it will crash.

  so first of all, I want to install SP2 and see if anything changes.

  help please, I don't really no what to do, and as you can see I don't know much on a computer, but I guess enough just to follow the directions to fix. Thank you.

  Click Start > right click on computer > properties > he'll tell you he that SP is installed.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Service Pack 1 is NOT installed

  So, I wanted to upgrade to Windows 7. Unfortunately my installer for 7 told me that I had to first install Service Pack 1. Large. I know I don't have because it does not appear on my list of Windows Edition. I try to get it from Windows Update, but when I search for updates, it shoots only other stuff (e.g. Office Genuine Advantage Notification KB949810), but the service pack does. I checked my update history and apparently this Service Pack 1 could not install and I received the error code 80080008.

  So I download the thing directly from http://go.microsoft.com/fwlink/?LinkID=139503, and when it finished downloading it disappears. Then I saved it on my desktop and when I click on it nothing happens. Can someone help me?

  Slurgly wrote: This would have to do with a question I had on several occasions with the installation of .NET framework 1.1 Service pack and the .NET framework through update 3.5 service pack?

  Yes, it's a possibility. These updates of .NET Framework are among a myriad of SP1 updates, like, for example, KB955430 & KB947821.

  But I'm more concerned about one or two other things:

  1. the error 80080008 is very rarely seen and suggests that an infection in progress hijackware is at the origin of the problem.

  2 Vista SP1 is available through Windows Update (for most users) since March 18, 2008 (SP2 since March 2009). It is very unusual that SP1 has not yet install on your computer again.

  How long Avast4 has been installed? What antivirus application was installed before you installed Avast and your subscription always news when you have uninstalled it in preparation for the installation of Avast?

  A Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  The foregoing, your best bet at this point may be to back up your personal data, format the HARD drive and do a clean install of Vista to get it then patched up to SP1 before you perform the upgrade to Win7.

  I doubted much that a repair installation (upgrade AKA on-site) would solve the problem. Speaking of which, have you ever done a repair for some reason installation any?

  PS: Free support for installation of SP1 problems has been available since March 18, 2008 through June 30, 2009. This support would cost you $59 USD per incident (or more) now.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista Service Pack 2 will not install on my Vista.

  Since the Service Pack was released I tried to install it. And each time, repeatedly, he'll prepare my computer, tell me to restart, it will do the "install Windows Vista Service Pack 2 1/3 0% Complete" thing when I restart and right at the end where it says "3/3 100% complete" it will stop for about a minute, then say "Service Pack was not installed. Returning change"and it'll take about half an hour at a time to undo everything he does simply, without any reason. I don't know what is happening, and it's the most frustrating thing because it won't go away, and I do not understand how to fix it. Could someone help me with what to do please?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows vista service pack 2 - will not recognize the presence of service pack 1

  Here's the situation

  I installed Windows service pack 1 (32-bit)
  computer restarts
  tried to install service pack 2, but it will not be installed because he thinks that I have not installed service pack 1
  went to automatic updates yesterday and he said that I had to install service pack 1, so I let him install that
  Updates checked to automatic update today... He always thinks that I need to install Service Pack 1 I did
  tried to install SP 2 but he always thinks that I have installed SP 1
  My ultimate goal is to install parental controls of Windows, but I think that's not possible unless I have SP1 and SP2 and Platform for Vista update

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Windows 7 Service Pack 1 is not installed

  Is anyone else having problems installing Windows 7 Service Pack 1?   He moved after about an hour, then restart starts to day and poster, "Service Pack Update Failed, return to the previous" or something like that.  The journal indicates successful installation, and then restart failed.   I tried to disable my AntiVirus from Symantec, and I tried the standard method of update via the Updater from Microsoft and completely download the update separately.   Probably lost 6 hours because of the time spent waiting for the update at the end and then restart/back back.

  I have the latest VMware Fusion (for Mac) installed and had installed all available updates prior to this service pack as well as IE9 on a MacBook Pro with the latest MacOS.

  At this point, I loaded a previous snapshot before the update and have not tried to install it again by masking the automatically downloaded update.

  Currently Windows 7 SP1 is not officially supported.

• I need to download and install Windows Vista Service Pack 1. I installed SP2 and I need to get the SP1 so that I can upgrade to Windows 7. How to uninstall SP2? I can't install SP1 until I get ride of SP2... it won't work.

  I had about the SP1 error messages, but I think it is caused by the presence of SP2 installed. I tried to install SP1 and around the permanently locked to my computer. Finally, I got it to run. Please help me to solve my problem with these Service Packs. I really want to get Windows 7.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  You will receive the best help here.

  Or, for the too your upgrade Windows 7 questions:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  See you soon.

  Mick Murphy - Microsoft partner

• WINDOWS VISTA SERVICE PACK 1 (KB936330) PROBLEMS? Help, please?

  Windows Vista Service Pack (KB936330) will not install? I tried several times, it will take about an hour to download, then just when I think she finally takes, it cancels everything back, and it takes another hour? He says it's important, but I can't do it, can anyone help? I would be grateful if someone could tell me what I need to do.
  Thanks in advance for your time
  Race...

  Hi racechasser,

  Thank you for using the answers.microsoft.com forum.

  .  .  Please download the service pack again. It may have been a corrupted download.p >

  You can ensure that a download manager is used for this process, so not yet of corruption that happens.   Search live.com or your search engine preferred download manager and select the one sure what you will find.

  Here is a link to the service pack.  https://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  Another way to look at this question is to get information of the event viewer on the failure that occurred.  To review event viewer / click on the ORB Start / computer right click / Select manage / select event viewer.

  Find the information in Event Viewer on the failure of the update installation and provide this information on the forum.  As well as if there is an error, you receive what it is and ID # is.

  Safety Note: always have on hand a good backup before you start any installs/updates/or diagnosis of troubleshooting.

  Let us know for more information if necessary.

  Thank you

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.