Windows Vista Service Pack 2 Basic /iTunes and iPod Shuffle (2nd generation)

Similar Questions

• Help Windows Vista service pack? I restart and it installs but stops. Help

  I therefore installed a Service pack today, don't know which, and everything went smoothly. Then the computer off once it's all over. He turned back and started to install again? I think so. But he was loading or installing (if it) and reached 75440 kb / 96302kb and just stopped with a weird error looking thing on the side. The thing was like that "!" 0xc01a001d!'
  Please help, thanks

  Hello TylerMcCargish,

  Thanks for your post.  Please see this thread to help resolve this issue.

  See you soon

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• during installation of windows vista service pack 2, an error code comes and says that some updates to update were not installed with an error code (KB948465) _

  system information:
  Windows vista edition Home premium
  2007 micro.corp. service pack 1
  Manufacturer: Hewlett-Packard
  model: compaq presario CQ61 notebook pc
  ORP of 32 bits. sys
  Processor: cpu t3400 2.16 GHz

  And the error was...?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  =====================

  In no order given...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005:
  http://support.Microsoft.com/kb/971204

  0X8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  http://support.Microsoft.com/kb/947821

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
  http://support.Microsoft.com/kb/967818

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I am repeatedly offered Windows Vista Service Pack 1, even though I downloaded and installed successfully.

  Original title: Windows Vista SP1 64 bit (KB936330) 1.5 MB update.

  I just reformat my computer and am trying to do the update process.  I use Microsoft Vista 64 bit and got most of the SP1 is installed.  TI completed most of it restarted, full of a few other updates and is now stuck on 1 part of the update.

  He keeps asking to install "Windows Vista Service Pack 1 for x 64-based Systems (KB936330) which is a 1.5 MB file.»  I go through the process.  He told me that I downloaded and installed successfully, and then when I hit the button to Windows Update, there is still wanting to be installed.

  I'm sure that this issue has arisen before but most of what I saw refers to the two error codes or problems with the installation of SP1 together.  Help, please!

  I had the same problem, I must have downloaded and installed sp1 about 10 times and there is no way that he was only 1.9 MB.

  I finished downloading it manually from the main site of Microsoft.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30
  Once you are done installing the update and Windows update tent always updated sp1, simply click on "check for updates" at the top left of the window, and who should confirm that sp1 has been updated and it should not try sp1 update more.
  It took about 1-2 hours in total, but it worked for me, hope this helped.

• do not install windows vista service Pack 2 and received error code 800f081f

  I tried to install windows vista service Pack 2 used by windows update and did not erro code 800f081f. I tried soft micro that it fixed and still couldn't install pleasehelp

  Hello

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I cancelled the update of Windows Vista Service Pack 2 (KB948465) and now I can't get it to download?

  I have started to download Windows Vista Service Pack 2 (KB948465) but cancelled it.. and now I want to download and update, but it does not display on my update list... any help?

  You can download the Vista SP2 standalone installer:

  • Download the SP2 32-bit from the Download Center

  • Download the SP2 64-bit from the Download Center

  To see if you have Windows 32 or 64-bit:

  1 open the system by clicking the Start button, right-click computer, and then clicking Properties.

  2. in respect of the system, you can view the type of system, it will say 32 or 64 bits.

• I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get this error message: Error Message 0 X % 1 in the message for %2 file

  original title: Error Message 0 X % 1 in the message file for %2
  I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.

  How I can fix

  Hi SusanReid,

  1. what email program are you using?
  2. you are trying to download from webmail or any mail client?
  3. don't download you and save the attachment or open it directly?
  4. What is the brand and model of the printer?

  I suggest to save the attachment and then print.

• Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  original title: errors for Service Pack 4 Windows Vista update - error code 643 and D59 - I do not KNOW WHAT to DO!

  Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  I DON'T KNOW WHAT TO DO!  I tried what he suggested, but cannot cross the error codes!  I am upset and frustrated because I can't work with the internet without slowing down.  I then close, only to have start all over again EVERY time!

  My internet keeps acting like dial upward because of this and I have cable internet!

  Help, please!

  This day SP4?

  Only in appropriate cases:

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Just in case where it is .NET Framework 4 -

  You can try the case just only repair the .NET Framework versions affected, especially if only .NET Framework 4 is involved.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  • Click on start/Orb and click on Control Panel.
  • Go to the program and features.
  • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
  • You should have the choice to repair or uninstall/change, click it.
  • This will then give you the opportunity to fix it
  • Select the repair option.

• Cannot install windows vista service pack 1 and 2 error: 8007006E

  Original title: Windows Service Pack 1 and 2 will be not updated

  I tried a few times to download the Service packs 1 and 2 so that I can reinstall my Windows live messenger. I didn't have time to let it run full the last time, but this time, her gives me: "error (s) found: Code 8007006E - Windows has encountered an unknown error.

  Usually I have no problem with my updates, they fit very well. This time, of course when I need it, he decides to not work (Murphey's law).
  How to fix this or get to download correctly, so I can reuse my Messenger? I uninstalled my Messenger when it stopped working (would not allow me to connect to all) for about a month or two.
  Thank you!!!

  Hello

  1. can you install other windows updates?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 2:

   Try to put your computer in a clean boot state, and then try to install Windows vista service pack 1 and 2 manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Try to install Windows vista service pack 1 and 2 from the link below.

  Service pack 1: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Service pack 2: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• I installed windows vista service pack 1 and now problems

  I installed windows vista service pack 1, and now it will not connect to the printer and I have no sound! I've updated the drivers of the two, and they work both according to their status of device but no sounds or printer connection. Help, please.

  Once solve you the problems with SP1, you can then start of SP2.

  How to resolve problems that you experience after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948187

  Important: things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  and - how to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

• Windows Vista Service Pack 2 and Startup Repair prevent my laptop to turn on.

  My laptop is running slow so I thought that I would need to update something. It suggested that Windows Vista Service Pack 2 so I started to update, but I remembered that my previous laptop was having problems with Windows Vista Service Pack 2 so I canceled the update.
  I then turned off my laptop later and now when I turn it on it goes to 'Launch Startup Repair', I have let this happen, but can not solve a problem.
  I then tried "Start Windows normally", but it goes back to restart and on-screen 'launch Startup Repair '.
  Then I tried to boot into 'Safe Mode' = nothing
  I tried restoring the system but there is no date available, and he said something like "there is no diagnostic tool.
  I don't know what I can do!

  Hi carlywray,

  Your computer came with Windows Vista preloaded? If so, contact the manufacturer for the disk recovery or a method of recovery of your operating system. If you have purchased a full copy of Windows, see this Microsoft document.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the release of windows vista service Pack 2 and flash 10 my system continues to blue screen

  After the last update of windows vista service Pack 2 and flash 10 that my system continues to blue screen, the solution has advised windows that will fix it is to uninstall flash and reinstal, it dosent solution work any ideas? I tried to roll back to Flash 9 and it's less, but happens again... someone has any ideas?

  First, uninstall Flash to make sure that's not the problem.  If the problem persists and if the problem is related to the installation of Vista SP2 (as seems to be the case), then Support Microsoft offers free technical support for installation of Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1&sd=gn.  They are experts on these issues and you should take advantage of the offer, although it is still free.  I'm sure they will be able to help you.  Minimize (but do not deny) the update of Flash and to focus on the installation of SP2 when you explain the problem.

  I hope this helps.  If this isn't the case, after return and we'll see what we can do.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• THE WINDOWS VISTA SERVICE PACK 3 I'M BACK AND WOW IS ONE IS GOING TO ANSWER OR PLEASE HELP ME! TY M

  JUST WANT THIS PROBLEM SOLVED TY M HAGD

  Windows Vista Service Pack 3 has not yet been released! If this post answers your question, click mark as answer .

• I can't update windows until I reinstall windows vista service pack 2 CD but I do not have the CD. I have just the product key. How can I reinstall it with the key.

  I tried to update to windows, but get error 80070490 that says I have a corrupted file (CBS Manifest) that is to be updated... so I check the error and it says to uninstall windows and reinstall using the dvd... but I don't have the dvd for windows vista service pack 2... I have the id... product help, my pc is done to the breakpoint until I make updates! I tried Fix - It, and it says error can not continue... I ran to day thought advise that I could upgrade to windows 7... but apparently so that I can fix the problems of windows, I'm stuck. Thanks for any help!

  Hello

  Error code 80070490 claims a repair upgrade install, not an uninstall and clean reinstall.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.

  Have you tried the other option for system update readiness tool in the link I just gave you?

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error. You can access and run this tool by reading this Knowledge Base article on the Microsoft Web site.

  And you need a DVD of Vista from Microsoft to do a repair installation upgrade according to the instructions, NOT the normal manufacturer's recovery disks.

  You will need to borrow a Microsoft Vista DVD from a friend or working knowledge.

  Here's how a repair upgrade installation:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And if you can't get a loan from a Vista DVD from Microsoft, you may need to do a reinstall of Vista:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

  See you soon.