Windows vista stops the screen blue and white
Computor will stop working, the cursor hangs and have to reboot to switch off. Sometimes he'll just empty.
Hi whutton4647,
1. did you of recent changes on the computer?
2. When you receive the blue screen?
3. What is the message you receive to the blue screen?
Method 1
Check if the problem persists in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Restart the computer to return to normal mode
Method 2
If the problem does not persist in safe mode, and then try to clean boot and check.
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you perform a clean boot and check.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Method 3
If you're still having problems on the computer, and then check the event viewer for the cause of the problem and post bacj with details.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!
How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their way of doing recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
Crash of Windows Vista after the SCREEN of HOME Toshiba
Greetings,
My father work laptop, a Toshiba Satellite L300D, running on Windows Vista, seems to have fallen, and it is promised (because he recently ordered a new laptop) that if I fix it it gives me.
The problem is that as soon as the laptop turns on, after the start of toshiba, but before the vista screen start loading screen, the system stops and everything is white '_' in the top left corner that flashes and disappears, leaving me with an empty black screen. I tried all below, in vain.
- Press F8, no matter how long, when and how many times, seems to have no effect. After pressing it enough times, the laptop starts beeping for a second every time I press another key.
- Removing the battery and pressing the power button for 60 seconds seem to have no use either.
- The recovery disks do not work. After that they load, the screen empty boring, with the small '_' rises again.
Please note that before any loading screen, it crashes. I tried going in the system (by pressing F2) Setup and see if there is a way of fixing it. I don't see a possible solution.
Help, please!
Create a Ubuntu Live CD ( http://www.ubuntu.com/desktop/get-ubuntu/download ) put it in your CD-ROM drive, and then try to start with it (go to the start menu, use the arrow keys and enter to select your CD-ROM drive), and then selecttry without any change to your computer.
If you can boot from this summer with success, it means that it is certainly a software or a hard drive problem.
replace the hard drive will correct these two questions (you will need to get a new operating system) or you can try to clean the drive with a live Ubuntu CD and just buy a new OS (or use ubuntu).to retrieve all the files you need are on the disk, read this article http://www.howtogeek.com/howto/15761/recover-data-like-a-forensics-expert-using-an-ubuntu-live-cd/
-
Windows vista 64-bit crashing into the screen blue and often impossible to reboot after crash
My windows crashes constantly everytime I try to watch a video or go to a page with java, if I try to install the new version of Adobe, it stops it's self down and do not restart, just it becomes black and stops. I pay for membership to netflix and I can't even watch a movie. I go on youtube it crashes, I'm trying to play farmville on facebook, he crshes... in a blue screen and this is what I get when I start it again:
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8006F77030
BCP3: 00000000B 6000000
BCP4: 0000000000000181
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini071911-04.dmp
C:\Users\DrGraceG\AppData\Local\Temp\WER-85098-0.SysData.XML
C:\Users\DrGraceG\AppData\Local\Temp\WER26A2.tmp.version.txtRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409July 20, 2011 Crash, 6 times
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80070B6030
BCP3: 00000000B 6000000
BCP4: 0000000000000181
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini072011-01.dmp
C:\Users\DrGraceG\AppData\Local\Temp\WER-144456-0.SysData.XML
C:\Users\DrGraceG\AppData\Local\Temp\WEREBE4.tmp.version.txtRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409July 21, 2011 breaks down, 4 times
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007066030
BCP3: 00000000B 6000000
BCP4: 0000000000000181
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini072111-03.dmp
C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txtRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409July 22, 2011 crashed 7 times
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007066030
BCP3: 00000000B 6000000
BCP4: 0000000000000181
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini072111-03.dmp
C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txtRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Many many people have this problem when I talk to others. Miscrosoft compromises our computers so we would have to buy new ones?
They know there is a problem and they don't even try to find a solution for this. In this economy, they force people to buy new computers, they will just leave people blocked company becase NOBODY takes the phone, if you do not have email, people don't keep in touch, if you are not on a social network or business networking nobody will know your business, you won't make any money nobody reads the ACTUAL newspapers these days, everybody reads the news on the internet. They only hurt people, they are forcing anyone to buy a new computer, people just can't afford it. Hundreds of thousands of people can barely keep their utilities on. In doing so I wish they will reconsider. I am disabled I will definitely cut if my computer goes down for good.Can we do any smell that?
There are also a lot that I need to run startup until the restoration. Windows restarts after the crash of the blue screen, I reinstalled windows twice, it works fine until I have start to install all updates. I have only installed MSE and it still happens. I lost all my music I paid a lot of money for, my paintings for children, important documents, all because I had to reinstall windows twice now. I may have to reinstall them once more and I do NOT wish to install the updates again. He really never stops until I installed updates to windows. I thought that if I use the programs from Microsoft that it will work, because after all, it's all done by the same company, but no, nothing works. I am so in the sincere real despair. Be alone without technical skills, hardly what actually on my disability check, now I'm going to cut everyone. Now I can't do ANYTHING without it crashing, nothing fun anyway. I tried Microsoft fix, I tried so many solutions. I paid for Adobe photoshop, because I like to draw things and I'm terrified to install it. I'm afraid to do anything fun or useful on this computer.
If I can afford a new computer at any time, I think I will try Apple, I lost my trust in Windows. Unless they make an effort to solve this problem, then I would give them a chance again, but not if they will try to help. I'm so frustrated. I spend a lot of money on this computer, it's an ENTERTAINMENT laptop and I get not very amused.
What is going on?
Hello
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
It is just like it loses power or stop it in the normal way? Heat associated
does not necessarily mean excessive heat, it could be something is too sensitive to the same
normal levels of heat. Also a computer will produce more heat as is pointed out how adding
software or updates, among other measures, causes it. Of course those actions should not
cause enough stress or heat to shut down the computer.For a laptop on everything that you can do is reinstall the memory and clean the ventilation openings (still may try to add
a small fan as a test). Of course first remove all power.This sounds like material so if the above does not help you then probably need help
a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
Support of system Maker.===========================================================
Check this thread for more information on using BlueScreenView, MyEventViewer and other
Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65----------------------------------------------------------
BCCode: 124 0 x 00000124
This is usually heat related, faulty hardware, memory, or processor even if it is
"possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
and cables (at both ends) - actually delete and replace - are not just tight. Ensure
the system has proper ventilation - add a small fan blowing in the contributions. Carefully
Inspect the card mother and other cards for damage. Pay attention to the fatal material
error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
or other BigBox stores) or system manufacturer support.There has been a few cases where Norton/Symantec and other antivirus/security
programs have caused this error.BCCode: 124 0 x 00000124
Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
data provided by the error Architecture WHEA (Windows Hardware).0 x 00000124<-- read="" this="">
* 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (updated drivers manually using the methods above is)
to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Windows Vista crashes, the screen becomes pink with diagonal dotted lines
My HP Pavilion DV9500 laptop started making a few months ago:
The computer and the programs sometimes simply freeze, sometimes the screen becomes a light pink with diagonal lines dotted, and sometimes the laptop itself restarts without warning. The computer is about 3 years old now and have not had any problems before this. I tried to do a clean install of the recovery feature that I don't have a Vista disc to reinstall from, and he always does this. Sometimes the computer will be fine for a few hours and sometimes just after the start it will freeze. A couple of times too, as it starts, Windows will not start and it will say "Not found operating system".
Hello
It sounds like imminent hardware failure/issues. Since you did a clean installation of recovery
pretty much excludes most of the causes of software if it could be driver related and there are other
possible causes remotely. Video/display and its drivers are suspected leader and mother.
Board and power supply.Keep good backups and check with a real store of the computer (not the leeks and glances at a BestBuy, etc.)
BigBox stores) or the manufacturer of your system Support.===============================
It's my generic convenience store and eventually it can help you determine the cause but I strongly
suspect material.Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
How can I fix my windows vista stops the process?
When I run normal stops the process, the system seems to want to close normally, but then was hindered in the phase "forest operations off the coast. I let the computer take its course at night, only to find tht the next morning, he is always "logout".
Hi Beachdubber,
· You receive an error message or error code?
· Did you do changes on the computer before the show?
I suggest you to check and clean the boot if the problem persists.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Let us know the results.
-
I have premium home edition of windows 7 I had a problem with my display driver. The screen flashes and goes black and then turns back on with a message in the bottom right of the screen that reads «display driver stopped responding, but recovered» It has also closed and restarted windows
Hello
First, download and install the drivers from the ATI site, if you have already done so, check the graphics card and cabin temperature by opening. This normally occurs when the temperature is too high. Or if a person has overclocked graphics card.
Thank you
Nitin Aswani
-
Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell. I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return
Hello
1. when exactly you get this error message?
2 are you able to boot into the office after getting this error on blue screen?
3. don't you make changes to the computer until the problem occurred?
I suggest you to follow the steps below and check if it helps.
Method 1: Try to start your system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 3: If the problem persists, then try to run the Startup Repair tool.
Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.
Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions
Hope this information is useful.
-
I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another? Thanks for any help on this.
Hello
1 did you change on your computer before this problem?
2. when exactly you receive error message?
You can follow the methods and see if it helps.
Method 1
Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
(a) click Start .
(b) in the search box type command prompt.
(c) right-click and select run as administrator of .
(d) type ping 127.0.0.1 and ENTRY.
If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.Method 2
Check to see if the problem exists in safe mode with network.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 3:
Alternatively, you can try to reset TCP/IP and then check if it helps:
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Method 4:
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.
On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:
Hi Gordon
I just downloaded drivers from the Dell website in support of xp
I have tried to reboot from the XP cd but got the following message when I tried to install
"This program is blocked due to compatibility issues"
Program - the installer of Windows
Editor - Microsoft
Location: D:\1386\winnt32.exe
Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"
I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?
You say that you have started from the XP CD, but something is wrong with that
you do. Just boot from the CD and follow the prompts for a
clean install. A new installation by formatting the
drive and does not care what version of Windows is installed (or
even if any version of Windows is installed.Ken Blake
-
* Original title: reinstalling Windows Vista
I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?
Hello
Here are the options of relocation:
How ro reinstall from the Dell recovery partition:
Reinstalling the printer Dell supplied disk:
______________________________________________
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
How can I recover my windows vista serial, the tile is broken and im missing some numbers...
I lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No. my laptop if you need if you can help me please write me * address email is removed from the privacy * thank youIf you had not reinstalled Vista, we helped you recover the product key of Vista for running old, Vista activated using specific programs.
But, as you have wiped the hard and reinstall Vista, we will not help you recover the product key.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
Using recovery disks is normally not need to insert a product key.
See you soon. Mick Murphy - Microsoft partner
-
I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?
I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!
-CoreyYou need a media player that is compatible with .mp4 files.
The following preferential ticket should solve your dilemma.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)VLC Media Player
http://www.filehippo.com/download_vlc/
(works on XP/Vista/7) -
Hi, I'm having a problem with my laptop. I bought my laptop online, a year ago, and I got a virus. Then, I had my computer reset and I need a code for Windows Vista from the bottom of my laptop. After looking through records and information, we found that he had no number. He worked initially but then recently he was asked for a product key or something of the sort code. I was using my laptop but I cannot customise my background etc.
Can you help me?
Thank you very much
The code is located on a label and is a 25-digit alpha-numeric (and very hard to read) code separated into 5 groups of 5 numbers separated by dashes. If you can't find it on the bottom of your laptop, open the battery housing and remove the battery and look there - I know of cases where this is where it was placed.
If you can't find the product key, your only choice is to contact the manufacturer and see if they can help. Sometimes the relocations made with recovery disks don't need to be activated (depends on the manufacturer and their recovery process must ask them and confirm before you spend money on the recovery discs). A valid product key is required for activation if activation is required - there is no way around this problem. And in case you are considering on it, you can't switch from one product not enabled - you need to do a clean and complete installation (update disc will not work).
I hope this helps and that the manufacturer can help you.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
He worked on an image and then stopped on the next! I have cs6. It is just the display of the background gray and white checkerboard on the upper left corner. I click on the arrow down to see if I can get it back to black and white and it will not change... it will not change if I click on any of them. I think it might be a bug? Any ideas will be appreciated. I tried to reset them as well. Thank you!!
Check your Options bar. You have the opacity set to 10%. Easy to do. Just hit the 1 key while the gradient tool is selected, and it's done. By pressing the 0 key will take you back to 100%
Maybe you are looking for
-
Can I put the Satellite P100-240 with internal fingerprint reader
I have a Satellite P100-240.Although he did not come equipped with material to print finger scanning, it has clogged the hole in the box where he would go.So I wonder, can I get the hardware scanning separately and adapt it to the laptop? I don't see
-
Installer keeps opening when I open the Finder
I have a legitimate copy for Installer lite Ableton. I installed it and it works fine. The problem is that the installation program starts everytime I open Finder or modify a folder. I'm pretty new on OS X. execution of Yosemite. Thank you Monty
-
Recently, my HP G72-B60US, is unable to boot. The window manager start Windows displays "unable to start Windows. To solve the problem: 1. Insert your Windows installation disc, and then restart your computer 2. choose your language settings, and the
-
Hi Fellows LabVIEW... I made a simple Dll (subtraction of two numbers) MS Visual Studios 2008 and I am the appellant in LabVIEW under target host computer. the Dll works fine. Subsequently, I pasted the same Dll in the drive C of 8106 RT controller P
-
Update CPU which proved later to be bad. Replaced by original CPU. Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2. Integrated Service Pack 3 which I got from the MS. site Ev