Windows Vista to Windows 7, it will help me run this program?

Similar Questions

• Updated Windows and now I can not run other programs on my PC

  Updated Windows and now I can not run other programs on my PC!  What can I do?

  Hello

  ·          Update you installed before the problem?

  ·          Do you have a code error message when you try to run any program?

  If the issue took place recently, you can perform a system restore that will repair return the computer to the point while it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• Compatibility "run this program in compatibility mode for" not showing "Windows XP (Service Pack 3).

  Hello

  I have multiple copies of Windows 7 Pro x 64.  Click with the right button on a program and select 'Properties' and then click on the Compatibility tab, most of them under "run this program in compatibility mode for" a ton of options going all the way back to windows 98.   Several have only options for Windows Server 2008 and Windows Vista.  I need "Windows XP (Service Pack 3)" as an option on all computers.  I don't see where you install.  My research are presented only how to install a Windows XP virtual machine, I must separate environment, I need this option so that the program works on computers (it can change the routing table, and makes to the virtual machine is not useful).

  What must be installed to the "Windows XP (Service Pack 3) option appear?

  Thank you

  Charlie

  If the program in question can be run in compatibility for a specific version of the operating system, then the option will appear in the drop-down list.

  Not all programs can be run in compatibility for all versions.

• Security risks for the execution of a program "run this program as an administrator" in Windows 7?

  What are the risks of security for executing a program using "run this program as an administrator" in Windows 7?

  The risk is that this program will bring changes inappropriate to your installation.

• If I switch to windows 7, I'll beable to run a program 16-bit legacy that was designed for windows XP?

  If I switch to windows 7, I'll beable to run a program 16-bit legacy that was designed for windows XP?

  There are a number of variables here.  First of all if you go to the 64 bit version of Windows 7, you will not be able to run 16-bit programs in normal mode.  However, if you go to the professional version of Windows 7, you can install the free XP Mode and run 16-bit programs under that.  XP mode runs as a task under Windows 7.  It works fine as long as you can live with the limited graphics.  I have 900 x 600 16-bit color at home.

  If you go with the 32-bit version of Windows, you might be able to run your 16-bit program in compatibility mode.  It depends of course is the compatibility with Windows 7.  Some work and some aren't.  The limitation with the 32-bit version is that it supports more than 4 GB of RAM.

  Good luck.

• Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

  Hello

  I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
  When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
  If I open the calculator several times (about 65 times), I have the same result.
  Sometimes, I get no error message, but the application does not open.

  Someone knows why?

  Thank you

  Hello

  You did the chnages on computer before this problem?

  I suggest you go through the steps of the following atrticle.

  "Not enough memory" error message appears when you have a large number of programs running.

  http://support.Microsoft.com/kb/126962

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.

• "For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »

  "For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »

  This message appears whenever I try to open Video Edit Magic, I already turned off Norton.
  Try to adjust the compatibility setting and run...

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  http://Windows.Microsoft.com/en-us/Windows-8/get-apps-devices-working

• Windows is repeated will not stop running

  I turned on my computer and the window is "recovery" will not stop turning. Help!

  Unplug, hold button power for 30 seconds and release it, plug your computer, reboot.

• All my applications and windows only open in Notepad who say, this program cannot be run in DOS mode, or this program must be run under Win32.

  I can't access one of my applications. or open all the windows. Because they are all open them in Notepad who say, this program must be run under Win32, or this program cannot be run in DOS mode. The only thing I can do is to use my browser and access the internet. This problem started in Wordpad and somehow put in Notepad.

  Hello

  This should help you.

  'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"

  http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

  "When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.

  Run the Mr.Fixit here or you can use the manual method it y to correct yourself

  http://support.Microsoft.com/kb/950505/en-us

  And also, read information please.

  'Change the programs that Windows uses by default'

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  See you soon.

• Windows 7 Error reporting is when running a program generated with BT LabVIEW 7.1!

  To dear Labviewer

  Once back in the year I had generated a program with - Labview 7.1.

  Now, I am informed that the LV 7.1 version is not supported by Windows 7.

  Now when I try to run the program generated by Labview 7.1.  in windows 7, I get error of communication via the serial port.

  Is there somehow something I can do to get this working. Is there any time the delivery of engines OR for Windows 7. ?

  Please feed back if someone was to help information.

  4-star...

  You have installed a newer version of the NI-VISA run-time engine that is compatible with Windows 7?

  The most recent Web site NEITHER seems to be the version 5.0.3.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2257/lang/en

• Loading magic jack I get an error: Windows Firewall has blocked some features of this program.

  Windows security alert...

  I installed MajicJack phone on the computer and created an Exception for MJ in the Windows Firewall Exceptions tab. However, when MJ loading an error message says that firewall Windows has blocked some features of this program. The message does not give me an option to unlock. What should I do as I already created an exception?

  Hello

  1. are you referring to the Windows Firewall or any other firewall?

  2 have you made changes on the computer before this problem?

  3. facing this problem with taking magic or any other application?

  I suggest you try the following steps.

  Step 1:

  If you use Windows Firewall, disable the firewall and check the status of the issue.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions? http://support.Microsoft.com/kb/283673

  Note: make sure that you enable the antivirus software, other security and firewall programs.
  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  Step 2:

  If the application works fine after disabling the firewall, turn on the firewall and check the status of the issue.

  If the problem persists, please check the Event Viewer logs and respond with more information to help you better.

  How to view and manage event logs in Event Viewer in Windows XP http://support.microsoft.com/kb/308427

• Asian locale?  Installed Acrobat XI for Windows, but when I try to run the program, it happens in some Asian locales - can not read anything!

  Hello

  I am setting up a new laptop and downloaded Acrobat Pro XI for Windows computer.  Download and install seemed to go fine, but when I try to run the program, it is coming in a few other locales (not French_FR).  What should I do to configure the program for the locale in the United States?

  (running Setup 3 times (to fix, modify, uninstall/reinstall), but so far nothing has worked.)  Even after uninstalling/reinstalling (where I deselected the local Korean), the program still continues to flow upwards in an alternate reality!

  Help, please!

  Thank you

  -fastkeysx

  Hi Vicki,

  Have you tried toggling this setting under Edit > Preferences:

  

  Kind regards

  Rave

• Will Win 7 run DOS programs

  I have a few DOS applications that currently work well with XP he.  Win 7 run these same DOS applications if I update the computer?

  If you have Windows 7 ultimate or professional, download Windows XP mode (MS free) and run them in that. Or, for all versions, download the virtual machine of back Box. Install and run them from that.

  http://www.dosbox.com/

  Tom

• Not able to open the camera into my laptop which is configured with windows 8. Please help me solve this problem.

  I have HP laptop & upgrade windows 7 to windows 8, here I am able to see the camera, if I click it will open and display connect them a camera too in the background I see 3 tools with off mode. How can I open my webcam? You can help it. Not able

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)