Windows Vista uninstall will not remove acdsee7

Similar Questions

• Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020

  Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020.

  KB2633952 is an option, not the security update. Feel free to hide it - especially if you do not live in Kaliningrad, Minsk (Belarus), Bahia (Brazil) or Fiji.

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• Downloaded Driver Detective, how to uninstall? Uninstall will not remove this program. __

  Downloaded Driver Detective, how to uninstall?  Uninstall will not remove this program.

  Hello

  You may have to reinstall - it does not matter if it works.

  Then use Revo to uninstall:

  Revo Uninstaller
  http://www.revouninstaller.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• Windows vista Setup will not accomplish

  replaced the hard drive, try to install windows vista on a dell vostro 1700.  He will arrive at "finish installation" and just sitting there.  eventually the screen is empty except for the cursor... why it ends normally install?

  E-mail address is removed from the privacy *.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Contact Dell at the above link for any problems with their recovery process.

  It's Dell recovery, not Microsoft software/process of.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  If you encounter problems, contact Dell.

  See you soon. Mick Murphy - Microsoft partner

• I installed a new hard drive on my computer and re-loaded windows vista. Will not be installing SP1

  I installed a new hard drive and re installed windows vista. I can't install SP1 because it is not supported anymore. Can I install SP2?

  1. Learn how to install Windows Vista Service Pack 1 (SP1)
     http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx
  2. Learn how to install Windows Vista Service Pack 2 (SP2)
     http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Manually install the SP1 and SP2 then.

  The links above will advise you where to get the standalone etc versions.

• my windows vista computer will not be validated

  I recently installed several security updates, and later my windows vista is not recognized as authentic. I bought it 2 years almost with installed before buying it, so I did not any area recovery CD or windows vista. the sticker on the bottom of my laptop is completely worn out. I downloaded an application key finder and have what seems to be a product key valid, but when I try to run the slui.exe it never ends. I get error 0xC004E003. I also never get an option to activate by phone, I suppose that that option no longer exists. How can I fix? It is the kind of a disadvantage and makes me nervous about using my computer on an unsecured network.

  Your error message indicates a "stuck key".

  This particular message occur to try to activate a key OEM_SLP - which can be activated by internet or phone-activated, it is based on the BIOS to activate.

  Your only real option, as you say that the sticker is now unreadable, is to reinstall Vista using the manufacturer's recovery disks or partition - note that this will erase all your data and programs, so be installed first of all external media!

• Update for windows vista platform will not install KB971644 - error message 80041006__

  my computer tried to install the update of platform for windows vista KB971644 since Novermber 5/09 - I get an error message that is not properly configure #80041006.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista update will not install and causes cell phone restart. Laptop will not reboot and Startup Repair cannot fix the problem.

  Windows Update tried to install 4 days now. Every time he tries it tells me it failed and trying to install in manually. He said then the laptop restarts, but it does not start. Startup Repair tells me that it cannot solve the problems.
  I don't know how to go beyond this problem, can someone help me? I have no disk Vista as it came pre-installed on my laptop. Help, please!

  If your Vista is preinstalled, ANY support for your laptop is the manufacturer of the computer, not Microsoft.

  Try this:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not she, transfer your question in the appropriate Forum:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista Setup will not download files

  Whenever I try to download a file from internet, it stops at 99%.  He did it only for a couple of months, so he must have had a problem with an automatic update or something.  All I have this problem and know how to fix?

  Hello

  To make another account with your same password - ADMIN upgrade - REBOOT (do not only closing session) and
  connect that account - you can download to use it? (do both ADMIN - one accounts in case that you
  migrate to it and another to test and difficulty).

  It while in the new use of the account to LOWER your account regularly APPLY / OK to need - and then lift back
  for the ADMIN - repeat several times - descent - go downstairs - raise - repeat. This allows to clear corruption.
  Make sure that the account administrator.

  Try your downloads in the new account - the downloads work in the new account?

  If necessary later this is the process to fix a damaged account or migrate to a new.

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  ---------------------------------------------------------------------------------------

  Then connect to the old account and try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------------------

  Then reset IE

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had
  on this machine, including those that you have uninstalled (they leave remnants behind which emits causes).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore advanced settings, and then click RESET - APPLY / OK

  IE - Tools - Internet Options - Security tab - click on Reset all areas - APPLY / OK

  Close and restart IE or IE with no addons

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever think malware update and then run it as
  a scanner.
  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Vista updates will not install

  When my computer restarts, it starts to install updates and did not finish.  Then comes the reboot of the system to solve problems.  Keeps trying to update and restart every time the computer is restarted.  Windows Vista.  Automatic updates was turned off

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My Windows Vista computer will not install SP1.

  He is in the final stage and then returned. I even uninstalled my antivirus to try it.

  Hello

  "How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues"

  Try Resolutiom 2 here:

  http://support.Microsoft.com/kb/947366#resolution2

  See you soon.

• Windows Vista - Laptop Will NOT start properly

  I'm trying to fix laptop from my friend and I ran into a dead end, trying to get this thing to start properly. It's a laptop of Dell Inspirion used (model pp26L).

  From it normally of the results in a blue or white screen. When I go into the Advanced Boot Options, I tried "last good known Configuration (Advanced) and it goes to the black screen and does not change for hours." I also hit 'Repair your computer' and it brings up a window that is titled "System Recovery Options: RecEnv.exe - Application Error" and said, "the instruction at 0x775c6295 referenced memory at 0x00000000. The memory could not be written. Click on OK to terminate the program. »

  I don't know what I can do at this point because I'm not too familiar with Windows Vista anymore. My friend cannot afford to buy a new laptop so I hope someone here can help me solve this!

  UPDATE: if I managed to get "Last good known Configuration (Advanced)" to work, but it left me with a window titled "Startup Repair" that says "Windows cannot repair this computer automatically".

  I don't have a Vista CD or whatever it is attached to the laptop. Everything that I have this thing is the laptop and the charger.

  The attached image is the screen that arose after the publication of the Startup Repair tool window.

  Run Dell F12 diagnostic tests. For the Inspiron 1420, follow the instructions here:

  http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/#older-systems

  If diagnosis then go to rescue all important data using a Linux Live USB:

  http://dellwindowsreinstallationguide.com/data-recovery-using-Fedora/

  https://www.youtube.com/playlist?List=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr (video 9)

  Windows Vista is actually the end of life and is not an operating system that should never be used again. There is no official free update for 10 Windows in Windows Vista, but it is a unofficial free upgrade path via the preview Windows 10130 Insider. The Inspiron 1420 must run Windows 10 64-bit with no problems. Follow the instructions here:

  http://dellwindowsreinstallationguide.com/Windows-XPVISTA-%E2%86%92-Windows-10-free-upgrade/

  https://www.YouTube.com/playlist?list=PL1RkaknDn7v8RDvZUZBKQnuIVM_cqbgs3

• Windows vista SP2 will not install

  help please I try to download this service pack 2 for the last 5 months, and he won't. it restarts the computer, but that say it has not installed whats up with that

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner