WINDOWS VISTA UPDATE PROBLEM AFTER REINSTALLING

Similar Questions

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• Impossible to install Windows Vista updates, tried to reinstall so

  This problem started two months ago. Vista does not install updates. Technical support told me to reinstall vista. I made and went on the vista update. Now I'm back to the same scenario. All download updates but do not install it. I'm not ready to re - install vista again because it took a month to re - install all my software.

  * original title - vista will not update even after reinstalling. *

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

• Windows Vista boot problems, after an automatic update

  Can someone help me with the boot?
  When I start my laptop it goes until is displayed: 'No configuration update 3 of 3' and all stays at 0% for 1 or 2 minutes and after it stops automatically. It restarts again and appears the same following 2 minutes and stops.
  How can I fix this without having to install the DVD? I don't have the installation of my Windows DVD. But with on DVD with also windows vista, I tried to fix it, he showed me that it is not a compatible version of vista on the DVD.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Full service pack 2 for Windows Vista update problem

  I'm bad havivg update to service pack two for Windows Vista Edition full. After I download and install the package it says then return back to the previous windows instalation. This whole process takes seven or eight hours. Then, I get so sort of little box on a black screen with some kind of error message and code. The last time I did this update I have re-installed a clean windows all over vista. So I lose some files. Then, Windows stores some of the files on the instalation of windows prior to an old file of windows. So what should I do to solve this problem? Is there a quick fix to this problem? Anybodys help is appreciated.

  Bye, narrating

  Hello Michael,

  Thanks for your help, but I downloaded the utility Windows install cleanup a few days ago and installed it. Today, after I first started my computer, I got a notification down in the lower right of my screen saying new updates are available. I clicked ok on update for service pack 2 and installed successfully.

  Bye, narrating

• Windows Vista update problem

  I'm running on Windows vista SP1. (I know there is a SP2, but can't get it)

  If I try to update via windows update I get an error: Code 80240016. If I try manually when I get to the posting form, I can not get this page to load, I get another error. Also I can't get updates from Toshiba. I have a great internet connection, update is the only thing that does not work. I recently lost the ability to play music from itunes, but the player still works, so I know this isn't a sound problem. I've had the computer for a little over a year now and it started about a month ago and so far windows customer service isn't being helpful. I tried a number of patches online, but none work, can anyone help me? What could be to keep me update Windows and Toshiba? Also, I tried disabling all firewall that I know I have, and that doesn't always.

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows vista update problems.

  Downloaded PC update of windows vista. PC rebooted and got stuck at step 3 of 3 0%. PC is currently caught in a loop with the message "stage 3 of 3 0% ' appearing before restarting again. I tried repeatedly pressing F8 but it has no effect. When the option to start in safe mode keyboard does not therefore computer starts in normal mode and continues the loop. have tried to use the vista installation disc however when the keyboard message "Press any key to boot from cd/dvd" does not and PC continues to start windows normally and continue the loop. currently have LIKE rock installed on the computer and can access the configuration options and startup of vista to F2 and F11 as a result. keyboard works fine when using these options. I have read the previous posts and tried the suggestions not dying of success for the keyboard however does not when confronted with options for safe mode and restart using cd/dvd. I can't access anything before the login screen, so the Task Manager and the start menu options are not put at my disposal. currently using another computer on the same network as the PC with vista problems. is that what I can do to break the loop or shut down the computer restarts itself?

  Try to get a dchange the boot order in the BIOS and repaired a boot with the drive below:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista update problems - error 0 x 80041001

  I spent hours/days to try to overcome the problems of updating Vista on my Dell Inspiron 1525 running Vista 32 with SP1 is installed.  I have installed the installation of update tool, disabled my firewall and Norton AV, even tried a Windows Vista SP2 Standalone update.  Nothing works.  I get an error code 0 x 80041001 (generic failure).  My third party software consists of Norton, Sage Instant accounts, Xerox and HP print drivers.  All my other software is a MS OFFICE 2007 with Visio and Project Manager.

  I even downloaded and run the Fixit software on the MS. support site  Still no go.

  Can help somebody out there!

  Thank you very much
  Len

  Hi LenB10p,
  Try this,
  To manually install the hotfix on the SMS site server, follow these steps:

  1. Create a folder in a location that your SMS site servers can use.
  2. Run the following command:
     Sms2003-RTM-KB837387 - X 86 - ENU.exe / x

     Check out the fixed files in the folder that you created.

  3. From each of the servers in site main SMS in your environment, use an account that has administrative credentials to log on your site server.
  4. Quit the SMS Administrator console.
  5. Stop all SMS services.
  6. Stop the WMI service.
  7. In the SmsRootFolder\bin\Platform folder, run the following command:
     regsvr32 /u Smsprov.dll
  8. Copy the Smsprov.dll file that is updated from the network share or disc in the SmsRootFolder\bin\Platform folder.
  9. In the SmsRootFolder\bin\Platform folder, run the following command:
     regsvr32 Smsprov.dll
  10. Restart the WMI service.
  11. Restart the SMS services.

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 32-bit Windows VISTA update problems

  I have a Windows Vista Home Premium (32 bit) system.

  It seems that the automatic updates does NOT work properly. My system has not been verified (automatically) for 5 days now. It was every day.

  When I try and ' check for updates ' manually update goes on and so on - for hours and nothing happens.

  I installed KB3177725 and it worked for a while - but now I'm back where I started from.

  Also, if I reinstall the update again and never check "Search for updates", I must have this here in or setting I can go back to auto check and hope that all of the work.

  Dennis Celeschi

  Setting the automatic updates in Windows Vista became one exercise per month. See:

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-critical-downloads-not-happening/f7a40af0-ec2b-4383-AC83-ccf2f136890e

  Best regards, VZ

• Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

  original title: problems with Windows VISTA update

  I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

  1. 9 47 code
  2. Code 800070002
  3. Code D 80024200.

  Is there a resolution to do the same thing?

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• connection after the vista update problems

  After that windows vista updates, restarts and configures, I can't seem to login screen. I type the correct password, but the screen only flashes for a second and watch the blue progress ring, but then comes back to the right of the login screen. I have to restart and run system restore just to connect, this happened last week with the same update and is quite a nuisance. Updates include:
  (important)
  Update for Windows Vista (KB971029)

  Windows malicious software removal tool - March 2011 (KB890830)

  (optional)
  Updated the Realtek for Realtek PCIe FE Family Controller driver

  -Input - Synaptics Synaptics PS/2 Port TouchPad

  Windows Live Essentials 2011 (KB2434419)

  Hi Raziel,

  First of all, we will do two important things:

  1. DON'T download or install updates from Windows Update for Realtek and Synaptics (or any other device drivers).  Instesd of get them through Windows Update, go to the computer or Web sites of the device manufucaturer to get the latest update and install instead.  Hide these two Windows updates so they don't mind again.  Unless expressly stated by the manufuacturer for updates from the Windows Update driver, always bring manufacturers instead.  They are the cause of many problems of update.

  2. in prior to starting the updates (and for each 3 other updates and driver updates), create a System Restore Point.  Of allows to install the other three updates one at a time and manually instead of through Windows Update.  Go to http://www.microsoft.com/downloads/en/default.aspx and look for the KB number and download the update appropriate for your version of Vista and install it, and restart and make sure that all is well before you more on the following.  If we have the same problem, use the restore system back out of it and post back here with the specific update that won't install manually as well as any error information, you can find the problem.  If we can reduce it to one, we will have a better chance of coming up with a solution.

  I hope this helps.

  Good luck!

• Lack MSVCP110.dll Adobe Premiere Elements on 10 is needed after installed update. Impossible to correct the problem after reinstalling, deleting and reinstalling.

  How can I fix missing MSVCP110.dll Adobe Premiere Elements on win 10 after installed update. Impossible to correct the problem after reinstalling, deleting and reinstalling.

  Hello

  Please visit https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html

  Hope that helps!

  Kind regards

  Sheena

• Vista update problems

  A WEEK ago, I HAD OF PROBLEMS UPDATES.IT DOWNLOAD & INSTALLATION RESTERAIT at 0%, I FOLLOW SOME IDEAS, HELP & IT SEEMED WORKING HOWEVER THE LAST UPDATE FINALLY INSTALLAIT ON THE 17th that'S GOOD what HE SAID LAST updates INSTALLED ON 17, BUT WHEN YOU click TO VIEW HISTORY of UPDATE I HAVE MORE RECENT UPDATES OF SECURITY ESS. DAILY & SOMETHING ELSE. THEN WHY does STILL SAY AFTER VERIFICATION OF UPDATES, INSTALLATION updates SHE WILL see THE GOOD TIME & DATE TO the LAST TIME HE CHECKED a DAY & SAID ALWAYS UPDATED ON 17 updates?

  Don't know.

  http://Windows.Microsoft.com/en-us/Windows-Vista/updating-your-computer

  • How will I know if my computer is up to date?

  • Get updates for Windows security

  • Update automatic UnderstandingWindows

  • Keeping computers on a network up to date

  • Repair or update a driver

  • Defender of the KeepWindows to update definitions

  • UpdateMicrosoft Office

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows Vista updates (12 April 2010) broke all the desktop shortcuts

  On 13 April, I fist notice this problem. I managed to it is resolved according to restore my computer to a previous point prior to the windows vista update have been installed. I didn't create a new restore point and also forgot to uncheck "automatic installation of windows. A few days later, the same problem after updates have been installed again on April 15. Unfortunately, this time I don't have a restore point previous April 15. So, I restored it on next day 16, but not resolved the issue. So I uninstall all vista windows update installed on April 15 but did not help either.

  Fortunately it affects only an admin user (user account that run windows update) all users are very well.

  Any suggestions to solve this problem, much appreciated.

  Kind regards

  lmaestro

  SOLVED. It is a Virus. A villain. For more information, see URL below:

  http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/039ceca1-c81f-4136-8c04-bf13c0378495

  I followed the comments posted by "lilvtboiraver" about the "Regetry Exchange" and it solved this problem.

  Thank you

• Windows vista update 80246008 error code

  Windows vista update 80246008 error code

  You must be logged in as an administrator to perform these steps.

  If you receive Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

  To change or restart the Service (BITS) Background Intelligent Transfer

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3 right-click the Background Intelligent Transfer Service (BITS) service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic (delayed start) is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  To change or restart the Windows event log service

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. right click on the Windows event log service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  If the problem persists after you follow the steps above, go to the Windows Update Support Center website to request support by e mail. https://support.Microsoft.com/OAS/default.aspx?Gprid=6527&St=1&wfxredirect=1&SD=GN>

  OR

  Try here and see if Russell Pope is available, if not, try another available technology.

  http://supportservices.Microsoft.com/support/services/windows_update>

  UTC/GMT is 10:53 on Sunday, December 25, 2011