connection after the vista update problems

Similar Questions

• Unable to connect after the automatic updates of Windows.

  I have two computers on my network, one with 7 and one with vista.  (US) both for automatic Windows update and yesterday, after both received updates, I couldn't go online.  Restored both and that solved.  Today it's the same thing.  I restored both and Windows updated together on manual.  Problem is I want to install updates, but you need to know what is happening.   Thank you

  Many other people have the same problem after the recent update of Win7.  A thread said that the culprit is update KB2705219 and you'll be OK if remove you it.  There is no other additional information that the user in question has done so successfully [I can't find the link, I checked both of these threads today].

  I have not tried to uninstall it I like my PC to install with a decent connection the last hours [no idea why].  I also have McAfee.

  - - - - - - - - - - - - - - -

  In addition, you should never uninstall McAfee or any other AV application unless you have a copy of the relevant utility uninstall application.  Results to omit this step can be severe and cause quite disconcerting & apparently unrelated symptoms.  I do not recommend this as a step for the problem today, but keep this link for when / if you decide to replace McAfee - McAfee Consumer products removal tool.  For other AV applications, see list of anti-malware cleaning - program uninstall tools

• Problem with wireless connection after the automatic update of Service Pack 2

  Do not see my wireless modem to connect after that Windows Vista Service pack 2 and the update of security were auto-mis to update last night.  Can see modems of neighbors but not mine.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  Or transfer your question in this forum: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Office 2007 does not open after the Vista update

  Hello world

  I've been using a trial version of Office 2007 Standard supplied with my notebook for almost two months without any problem. Yesterday I updated to Vista x 64 and now I get a "the application failed to start because its side-by-side configuration is incorrect." pop up when I try to open any office program.

  I uninstalled and downloaded another version to test, but when I try to open Word or any other part of the office, I get the same error.

  Out of all the "" regular updates, it's the only one that is a new: Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 64 I guess this is the prob.

  I tried to uninstall Microsoft .NET Framework 3.5, but the uninstall program always, said: "Setup.exe has stopped working".

  Someone has any idea how to solve this problem?

  Thank you

  Here's an update. The two programs of Nikon not open as well. I don't know what other progs have been affected.

  -------

• HP Photosmart D110a does not connect after the software update of the router

  I'll try a restatement of my first message:

  Two days ago I had problems with my Internet service provider modem.  This problem has been solved, but leads to a second problem still does not connect to the internet.  Then with the help of technical support D-Link, an update of the software has been downloaded to my wireless router and installed and now I can connect to the internet.

  But today, I had to use my printer/scanner for 2 1/2 year, HP Photosmart D110a, it is not connected through the above wireless router.  (The blue light on the printer blinks just).  Tech support says I'm out of warranty, so I hope someone can help me here on this forum.

  Thank you!

  Glad you got it to work, please mark it as Solution accepted so that others can search and find the answer too.

• After the last update problems

  Since the last update, I got very annoying problems of towing. Firefox continues to change my homepage Homepage of Mozilla. So am I looking for new ighome! and then reset the home page. Then it also changes my appearance to the default page. I like the one I have. So, I have to click on use default, then restart the look I want, stop and try again. I want to uninstall and do a clean installation takes time that I have yet.

  Hello

  It seems that a parameter has been changed on your new tab page. These changes are usually caused by bars of third-party tools or modules. I understand that you would like to know how to reset it. No problem, please follow the steps below:

  1. In the address bar, type Subject: config and press enter. The "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise! to keep the comments: config page.
  3. Type browser.newtab.url in the search box to find it on the list.
  4. Double-click on browser.newtab.url and type on: newtab in the window that opens.

  Restart Firefox and open a new tab to ensure that the change has been made. If there is no problem with the plugins please see also: troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Please post back with your results, we are happy to help you.

• After the vista update, the file came out: \boot \BCD with status 0xc000000f. window cannot start and no response my installation dvd

  Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.

  I think you should contact the manufacturer about this problem with the Bios...

  It is usually F2 or delete to enter the Bios / configuration at startup.

  See you soon.

  Mick Murphy - Microsoft partner

• Equium do not sleep when closing 'lid' - happens after the Vista update

  Since a recent update to Vista my laptop won't sleep with the (power) button either in the start menu.
  The power led lights in red and it says "lock computer" when I try to wake up.

  Can anyone help?

  Have you tried to roll back OS (until the updates have been installed), using the System Restore tool?

• Display after the Nvidia update problem

  After you have installed the most recent driver (ver. 340.52) for my graphics (Nvidia GeForce GT 625) thanks to the HP Support Assistant, my screen has been changed. Everything has a blue/grey tint - it's like the red and green color no longer exist!

  Cables and the monitor are fine; I tried a system restore; I rolled the driver back to the version 337.88 - all with no change.

  I'm running Windows 7 on a HP Pavilion 500 - 205t, Intel Core i5-4570, 64-bit processor.

  Suggestions? Thank you!!

  Hello

  Avoid using adapters as they can and do fail.

  Install the driver NVIDIA of originwhich has been published for your PC.

  If the above doesn't work then try the suggestions below:

  Try the monitor and cable on another PC to remove these components as possible problems. If not, try a known good monitor and well-known cable.

  Remove the video card and try onboard video, coming from the motherboard.

• 2 Smartband does not connect after the software update

  Hello

  So I upgraded my Xperia Z5 yesterday and now my Smartband connects.

  I've seen some other posts on this topic and I've tried everything mentioned there, but it still does not work.

  I tried to activate my Bluetooth and NFC and turn it on again and the phone as well.

  I force arrested two apps smartband and erased their data and cache.

  It will not pick up my smartband Bluetooth that is so impossible to connect in this way.

  Smartband is fully charged and I tried to turn that off and on again as well.

  So I don't really know what else to try?

  Have you also tried to reset the tape? It contributes generally to:

  http://support.sonymobile.com/global-en/smartband2ios/Userguide/resetting/

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  original title: I have the same problem posted by Don Gagen on 16 April. My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  I installed some updates Vista Home Basic important for my laptop on Wednesday, and since then, my computer won't start. I get to the first page of Windows that shows "Configuration updates 0% complete" for about 15 seconds and then restart the machine. This loop continues indefinitely. I spoke to the manufacturer (Dell) who say there have been some recent problems with the update service, and I have to pay (£69) to address this problem. I don't really want to pay for a repair, when the problem does not seem to have been caused by me or my computer. I tried all the options from the start menu, but there seems to be no way to solve this problem, for example, in 'Safe' Mode, the problem persists, and 'Last successful login' does not work either. It will not launch command prompt. I ran Dell diagnostic check before extended initialization and there seems to be nothing wrong with the hardware. I have no disks system of re - install Vista (and that I would lose all my data anyway). I can also access the ID of the license of Vista. The computer is no longer under warranty, and I have no agreement to support hardware or software for it.

  I would be grateful for any suggestion.

  Alan

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Problems after the automatic update from Microsoft Outlook

  A

  about having Microsoft automatic update, Outlook on Vista has stopped working properly. I can open the program, write an e-mail or two and may be able to send a mail, then the program freezes. It happened just after a update to day to day. How can I solve this problem without removing the new updates?

  Automatic updates has also changed all of my Web pages. It's very upsetting. Why? Internet Explorer took over. What was wrong with me. I gave permission to the automatic updates program but does not reset my personal settings. How can I avoid this in the future?

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner