Satellite A210 - 11 p PSAELE - display driver has encountered a problem

Similar Questions

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• Satellite A210-171: need XP display driver

  Hello

  I bought Equium A210 with Microsoft Windows Vista... I some how manage to get drivers Wireless LAN for XP but I don't know where to find the display drivers please someone tell me...

  Thanks a lot, I really need to do so much work and its just crashes me...

  Thank you

  Well, I checked Toshiba European page and there is not a lot of drivers XP for Equium A210.
  But don t you worry man. I think that you are not lost ;)

  As far as I know, that this device supports ATI Radeon X 1200 graphics card.

  Some units of the Satellite A210 series were equipped with the same graphic card.
  So please check the Satellite A210 series (there are different so go through A210 all singles series) and try some graphics drivers ATI posted on the European driver Toshiba page.

  These drivers must run.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.

  Signature of the problem

  Additional information about the problem

  Hello

  1. Once you get this error?

  2 have you made changes on the computer before this problem?

  3. which device is causing the problem?

  Code 31: This device does not work properly because Windows cannot load the drivers required for this device.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the Fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Update the driver and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see the following Microsoft article.

  The hunt for drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

  Hope the information is useful.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39. __

  The cdrom did run for awhile... and then he stopped. I googled the error code and it said: ERROR_HANDLE_DISK_FULL
  39 (0 x

  Problem event name: PnPDeviceProblemCode
  Architecture: x 64
  Hardware ID: SCSI\CdRomHL-DT-STDVDRAM_GH15F___EG00
  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 00000027
  Driver name: cdrom.sys
  Driver version: 6.0.6002.18005
  Driver date: 11/04/2009
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105

  Is there a way to reset the device?

  Thank you... Steve

  Hi Steve,.

  Here's an article that might help: http://support.microsoft.com/kb/314060

  Method One

  1. Completely remove the Upperfilters and Lowerfilters from the following registry key values:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     NOTE: If you get a code 39 message, it may be that additional third-party filter drivers were added to UpperFilters and LowerFilters values in addition to Adaptec filter drivers. In this case, you can try to remove the first non-Adaptec filter drivers, filters Easy Creator by leaving in place to see if the Code 39 goes away. If you still receive an error code 39, 32 or 31, delete Upperfilters and Lowerfilters completely values in the previous key.

  Mark <> Microsoft Partner

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10. ___

  My driver will not start.  May not be the problem, but it started after I downloaded itunes.

  Hello

  You may need to uninstall iTunes to get the drive working again.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• driver software encountered a problem code is 31

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.__ (Problem code 0000001F)

  Signature of the problem

  Additional information about the problem

  Bucket ID: 562419118

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: pci\ven_1022 & dev_7455

  Configure the class GUID: {4d36e97d-e325-11ce-bfc1-08002be10318}

  PnP problem code: 0000001F

  Name of the driver: pci.sys

  Driver version: 6.0.6002.18005

  Driver date: 11/04/2009

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Hello

  Is the hardware ID - Tunnel of graphics from AMD - 8151 HyperTransport (MC) AGP3.0

  Check with AMD and also Support from the manufacturer of your system and downloads to update or reinstall
  currently the drivers.

  AMD - Contact
  http://www.AMD.com/us/aboutamd/contact-us/pages/contact-us.aspx

  Drivers & support AMD
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ====================================

  Given that this could be caused by a corrupt or drive or another file, you must also run these 1:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite M50D-A-10W - display driver has stopped working while gaming

  Hey guys I just bought a toshiba Satellite M50D-A-10W and I have a very annoying problem...
  When I play in dota 2 sometimes I get a massage like: "display driver has stopped working" or answer

  I remember exactly, and the freezing of the game and then screen I need leave the game and reconect. If you can help me guys, I'll be very grateful

  Rare Hi

  This message is certainly created by the installed graphic card driver.
  I can't say for sure why this happens, but I recommend you to reinstall the graphics driver.
  In most cases, this should fix problems with gambling.

  Greetings

• Satellite A500 - display driver has stopped and recovered

  Hello!
  I have a portable Satellite A500-1EE causing me trouble lately. Several times a day, the screen goes black and after a few seconds, it retrieves, with the message:
  "Display driver has stopped and recovered. Display NVIDIA Windows Kernel Mode Driver, Version 257.21 driver stopped responding and has successfully recovered."

  Please give me advice on how to solve the problem.

  Thank you
  Roxana

  From time to time it happens on my P500 too but especially if I look at a Web page with flash player but after driver recover everything is OK again.
  To be honest, I don't see it as a major problem.

  Is there a particular situation when it occurs on your A500?

• Satellite M300 - display driver has stopped and recovered continues to appear

  Hello

  I'm new to this forum took me half an hour to figure out how to do this post.
  If anyone knows a solution please help

  Hello

  If I understand your ad very short: you got a message that the display driver has stopped or has crashed and recovered again.
  Right?

  Maybe a new display driver installation would help sort this problem. ?
  I recommend you to uninstall the previous driver.
  Clean the system using CCLeaner (or other 3rd party tool)
  Restart the unit, download, and finally install the latest version of the display driver for your model of laptop. Restart the unit.

  Voila

• Satellite M70-340: display driver has stopped working

  HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

  I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

  ADAPTER IS INTEL! ATI DOES NOT INSTALL!
  DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

  PLEASE SUGGEST...
  CONTACT on [email protected]

  Hello

  If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
  This means that some hardware component is defective.
  In this case, you need to take your laptop to the service.

  Good bye

• Satellite A200-1BP: need to display driver for Vista

  Hi guys!

  I have a satellite A200-1BP... that one must download a±? A± did not understand these = PSEAC, PSEA0...

  So I installed one of them for vista... for geforce go7300.but my display driver has not changed... it still didn't give me that a± want a good perormans... A± couldn't play NFS carbon: (...) How can a± install my display driver for vista? help me... Please explain correctly and in detail

  Thanks for your answers rigth now...

  Hello

  Additional numbers describes the series of laptop! There are different A200 series!
  At the bottom of the unit, you will find the integer and you need only the first characters and numbers 5.

  Please choose the right Satellite A200 series and download the graphics driver on the right!

  But the way in which; I don't know if the game performance will improve after the installation of the new graphics driver I've read somewhere that Vista needs a lot more material performance and that's why some games don t m runs smoothly.

  In such cases, it s advisable to run and play games on Win XP operating system!

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• Display driver has stopped working during the game the Sims 3

  Original title: video card? With the Sims 3 ~.

  I bought the Sims 3 and downloaded yesterday. I have played since then, but then the game would freeze and tell me that this ialmrnt5 of display driver has stopped working. So I tried to fix it, and it did not work. Now, he tells me there is something wrong with my graphics card and Sims does not work yet. I keep going from one link to another tells me to download this and that and I don't know what I have to do. I want to be able to play my game, because it's expensive and I bought it only yesterday. Help, please. PLEASE, I BEG YOU.

  -Poprocks26

  I thought about it, are not even worry about this.

  I just needed an update from Intel. It works perfectly now. :]

• error msg, "ialmrnt5 display driver has stopped working normally."

  Hello!!!

  I use an old PC configuration, windows xp Intel 845 G, for several days that I get an error msg whenever I try to run mp4, .mvi and many other video files saying: "ialmrnt5 display driver has stopped working normally. Save your work and restart the system. the size of my screen becomes huge and icons on my desktop... expand please suggest a way out for remedy.
  My email ID.
  E-mail address is removed from the privacy *.

  Hi Moiz,

  Thanks for posting your question in the Microsoft Community.

  This problem can be caused if the display drivers for your computer is damaged.

  1. What is the brand and model of the computer?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  Follow the steps in the link.

  Windows stops responding and you receive an error "display driver has stopped working normally":

  http://support.Microsoft.com/kb/328071#appliesTo

  I also suggest you to update the display drivers for your computer from the links.

  https://Downloadcenter.Intel.com/default.aspx?lang=eng

  http://www.Intel.com/design/chipsets/datashts/290746.htm

  If you need further assistance on this topic, let know us and we will be happy to help you.