Windows will automatically stop.

Similar Questions

• Windows will not stop automatically as it has done for years. What is going on???

  I have to say?  I already said repeatedly that WINDOWS is STOPPED NOT AUTOMATICALLY ON MY COMPUTER BECAUSE IT has FOR AS LONG AS I'VE BEEN ALIVE, WHO IS NOW EIGHT DECADES.  WHAT ELSE DO YOU WANT?  WHAT ADDITIONAL OBSTACLES HAVE TO JUMP UNTIL I CAN GET A SIMPLE ANSWER OR SIMPLE HELP?  WHAT HAVE I DONE IT SO HORRIBLE IS THAT OF A SUDDEN WINDOWS IS LIKE THAT.  I'M A COOL GUY WITH SIMPLE NEEDS, BOTH IN LIFE AND TECHNOLOGY.

  Hello

  Please do not type in capital letters as it is difficult to read and considered to be shouting.

  ---------------

  Check your antivirus/antispyware/security programs as a possibility. Especially if they check
  removable drives on shutdown. Sometimes it takes actually uninstall it to see if
  they are part of the issue (and controls removable drives are not the only symptom these)
  can cause). Not having not more than one program antivirus/security, all on the same system if
  used, and uninstall them can leave problems causing remains.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ----------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Defender automatically stops

  I have Windows Vista on my computer and AVG Free 9.0. When I start my computer, it is supposed to automatically start windows Defender. I have to manually start so he could analyze. Sometimes it stays on while other times is will turn itself off until the computer is turned off.

  http://forums.Avg.com/us-en/AVG-Free-Forum?sec=thread&Act=show&ID=33109

  Read what precedes the AVG Forums.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and should automatically disable the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  See you soon.

  Mick Murphy - Microsoft partner

• update essential live window will not stop

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: windows update of windows live essential never end and I can't find a way to stop it.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Steve,.

  ·        That the same update is offered several times or do not complete the installation of the update of Windows Live Essentials?

  ·        Do you see changes in the definition of virus from Windows Live Essentials?

  ·        You are able to correctly install the other updates?

  If the same update is offered several times, you can follow this link and check if the problem persists.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Defender automatically stops each day, after the market

  I suspect that a virus can exercise control to disable the functionality of Windows Defender, although tests show not all.

  Posting here instead: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security

• my windows will not stop

  Windows continues to close when I go to shut down the computer

  Why not just let him finish prog and close? before going off.

• window will stop in less than a minute, stops and restarts everytime I use the computer

  message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer

  Hello

  ·        This happens randomly, or when you open any application on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Check the event viewer for the newspapers and let us know. Follow the steps mentioned in the link below.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 1:

  Step 1:

  I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  I suggest you do a clean boot and see if the problem still occurs.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 2:

  It may be there is a scheduled task on your system. Check in Task Scheduler and if there is no scheduled tasks then, remove and check if the problem persists.

  Automate tasks with Task Scheduler

  http://Windows.Microsoft.com/en-us/Windows-Vista/automate-tasks-with-Task-Scheduler-from-Windows-Vista-inside-out

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• USB HUBs in Windows 7 has stopped working

  All devices connected to a USB 2 HUB worked until today on Windows 7 Pro System.  Uninstall and re install installs the device in the field "Other devices" without a pilot.  When I select Generic USB hub to the installation, it is not recommended.  Installation in any way will result in failure: Code 31.

  Hi John,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What was the reason to uninstall and reinstall the USB hub?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check if that helps.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  If this does not help, then use method 2.

  Method 2:
  I suggest you uninstall and reinstall the USB controllers and check the issue.

  Use Device Manager to uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To uninstall and reinstall the USB controllers, follow these steps:

  a. Click Start, type Manager of devices in the search box of start and press ENTER.

  b. develop a 'USB Bus controllers'.

  Note: You will need to scroll down to find this point.

  c. right-click on the first controller USB under "In Bus USB controllers" and then click "Uninstall" to remove it.

  d. repeat the above steps for each USB controller that is listed under 'USB Bus controllers'.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Now, check the USB device to see if it works.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• you have to have free space, or your files will automatically separate?

  I have about an 80 gigabyte and I want to share it at halfway but its full, so I was wondering if windows will automatically share files

  Your question is not particularly clear.

  Windows will only save a file on a single path then if the Act of writing a large file will fill a particular drive that the write will fail completely with a lack of space error.

  When writing multiple files to a removable device, it can request a change to the device when it is full.

  It is not generally recommended to fill out a capacity HARD drive as standard household tasks will not work. You should always have at least 15% of free space on a disk partition.

• Windows XP will not stop with service pack 3

  Several months ago I installed service pack 3 for Windows XP.  From as soon as possible, the system would block when I'm going to stop it.  The only cure (for a novice like me) was to put the computer manually.  Sometimes, maybe once every 15 - 20 times, the system shuts down normally.

  I lived with it, but it's very boring, so I went to remove the program from the service pack 3 today, and the system does not allow deletion.  So my question is:
  1. is there a way for me to solve this problem when windows will not be stopped?  , or,
  2. is there a way for me to remove service pack 3?

  Thanks for your help!

  At some point, this computer had McAfee and Norton.

  The foregoing notwithstanding, Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. "Leftovers" can be the cause of your problems:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. close all open applications (that is, anything with an icon on the taskbar).

  5. double-click on the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot once again.

  => Did you get SP3 installed again and is the computer fully patched to Windows Update (including the most recent update root certificates)?

  Extended support for WinXP SP2 ends July 10, 2010. After this date, the computers running under that WinXP SP2 will NOT be offered for additional updates of critical security, automatic updates do not work, and site Web Windows Update won't be available until SP3 is installed.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Automatic update of Windows will reboot you computer automatically within a few minutes from 15:00

  Automatic update of Windows will reboot you computer automatically within a few minutes from 15:00

  How to stop this message while I'm working?

  I don't mind using the automatic update, but I don't like having to click this message all night while I'm working?

  See the thread below for a possible solution:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c584900a-BDDC-4E30-B159-0e49cb231c0f>

  08:11:5507/08/11

• Skype has stopped working. a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Skype has stopped working. a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  We have Windows 7 and automatic updates.
  I worked until the afternoon with Skype and after an hour when I arrived on the Office to continue to work the Skype has stopped working.
  Please help me urgently!
  We did all the things written on goole /Microsoft Skype support.
  Does not Skype is the only program ot getting intalled

  It worked! I had tried everything, but it worked for me, thank God, we communicate through Skype of Nevada USA, Ireland and cannot lose touch. It's an absolute answer to our prayers. Thank you for posting!  Skype heartbeat is a very informative page that I had not discovered before now, either. Excellent!

• I get the message "app Incredimail has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution.

  When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client.  I have gmail for my email.  You are able to help with this problem?  Thank you, June Fleischmann - my email address is * address email is removed from the privacy *

  I suggest to see if there are updates or new versions available for IncrediMail.

  If still no luck, I suggest to ask the support of IncrediMail

  I hope this helps.

  See you soon,.

  J

  

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SilkRoad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  After I installed and opened a Silkroad Online on my Windows 7 64 bit, an error pops up: Silkroad Online Launcher has stopped working, and a close button the program. Any ideas on this subject? I tried to disable the firewall and antivirus software and restart the game, but it didn't work... I don't know what to do. The whole eror massage: Silkroad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available

  It is a file you need to edit in Notepad in the game directory. I would contact the manufacturer of the game as to what exact file. I have not personally done it, but I've seen this fix on other forums. MCP. MCDST. LVL 80