Windows will install not update (Cumulative Security Update for Internet Exp 9 for Windows Vista - KB2722913

Similar Questions

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?

• Will be not updated for Windows 7 - HP Pavilion P6 - 2107C

  Hiya - user of HP of long date, first time poster.

  I got the HP Pavilion P6 - 2107C for a couple of years now - but not * time * I I've never been able to perform a successful Windows Update.

  I bought the unit new to the Club of Sam and - plug - I came to update immediately once I had hooked him.

  Problem is whenever I try an update to Windows 7, it says 'do not turn off - we're updating' and then crashes to all update, 32 or 64 or somesuch.

  Seems to be an update which is put on hold that I should avoid (that would be fairly simple) or that I always had a problem of PC.

  Opt for Occam's razor, I choose to believe the first description.

  I am fairly well oriented the courage and the operation of any computer - built a couple myself - but software, including operating systems, is rather out of my depth out of install it correctly.

  As it came pre-installed, I expected to work perfectly, but very disappointed that day.

  So, here's my question - y at - there anyone out there that can give me some advice?

  ANY guidance would be appreciated.

  Thank you, in advance!

  Pax, harmonia,

  Brian G. Philbin

  Thank you for the additional information.

  You did a great job of troubleshooting.

  This is the Windows Update Troubleshooter for Win 7.  Give it a try to see if finds problems.  This is one of those problems that sometimes takes a lot of small steps to solve it.

• will be not updated for windows 7, it is not said outsole

  I need help I don't know what im doing windows says no update is don't not geuniune, I bought computer in walyworld (walmart) he ' s one compac presario CQ57 I followed the instructions a few other posts so here I diagnostic tool answer thank you in advance for the help.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {F2C075B3-C957-4CC4-B106-EAE56BAAFB36} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: n/a, hr = 0 x 80070002
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F2C075B3-C957-4CC4-B106-EAE56BAAFB36}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-4062371744-661480254-459974063Hewlett-Packardlaptop Presario CQ57 Hewlett-PackardF.4320111213000000.000000 + 000A4A23907018400FC04090409Time(GMT-05:00) Standard is03HPQOEMSLIC-MPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7601.0000-2372011
  Installation ID: 011736583693984851067406216270900382701060503195515170
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: licensed
  Remaining Windows rearm count: 1
  Trust time: 09/03/2015-17:44:40

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 3:9:2015 18:40
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: LAAAAAEAAQABAAEAAAABAAAAAgABAAEAonamOwyXjBvOhuqcHhx plus yBCD/Ag

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HP APIC INSYDE
  HPQOEM FACP SLIC-MPC
  HPET HP INSYDE
  START HP INSYDE
  MCFG HP INSYDE
  ASF!   HP INSYDE
  SLIC SLIC-MPC HPQOEM
  SSDT HP INSYDE
  SSDT HP INSYDE

  Hello

  I understand you are having problems updating your computer, like your Windows is not genuine. I'd be happy to help you with this problem.

  I suggest you refer to the suggestions of Noel D Paton responded on 22 July 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-build-7600-this-copy-of-Windows-is-not/149fba7e-08f5-4369-8df7-abc786627117

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• IPhone 6s don't sync for mac needs to date, but don't will be not updated for mac

  It drives me crazy, I need help that Mac is about to go out the window!  I downloaded itunes and installed as I needed to update the new 6 s sync and back up 5 old! and it will not again I checked all possiable for other updates and still no joy I can't get my new phone on sync or my Mac to synchronize with it!  Help!

  Hello! To sync an iPhone with iOS 9 or more on board, you need iTunes 12.3 or higher, which is not compatible with OS X 10.7.5.

  You need to upgrade your operating system or use another computer.

• After Effects will be not updated for MAC 10.9.4 even on the Root account.

  I've already updated my Mac OS to 10.9.4 and it was only until today that I wanted to use After Effects. I opened After Effects and I get an error, after some googling I am taken to a download page for the update of After Effects. I downloaded the update, but when I ran it, it said I had no sufficient privileges. After a long chain of events that involved trick my computer into thinking that it was all new to an admin account, I made an admin account and from there had access to the root account. Once the root account, I thought that all the permissions would be open, but no, I still receive the same error message, "please contact your system administrator if you want to apply updates on your machine. Updates have been removed by your administrator. »

  Is there an I need to press the button or command that I need to type in the root account, which will allow me to update the AE? Any help would be appreciated.

  Thank you.

  This is not the administrator of the computer; rather, it is the administrator of your software licenses. Who distributed your Adobe software seems to have chosen the option in this distribution to disable updates. You will need to talk with them.

• Edited PDF form will be not updated for editing from the browser.

  So I was sent a form that I had previously made editable has been changed and I had to add checkboxes and text boxes. After registration and in the browser window, new fields, I added are not allowing me to enter or check them in the browser, but when I open the PDF in Acrobat Pro, all fields are appearing. Is there a special way to save the pdf file to make editable in the browser? I did it once before, and it worked fine so it's a mystery to me at the moment. Any help is greatly appreciated!

  Here is the link to the pdf document to see what I mean. All the boxes are here so I don't know why it will not work in the browser.

  Dropbox - contribution form PDF FINAL 2.pdf\

  Help, please!

  I agree with TSN thought that it's a browser problem, such as the MAC preview. I opened your link in my browser and it worked fine.

• I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to

  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.

  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to
  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  Relax and breathe.

  FIRST: Uninstall IE8 and IE7 if they are installed.  Back to all the way back to IE6.  You want other patches before you get those.  Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

  Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

  How to fix?

  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• Update Windows in Windows 7 will be not updated. Error code 80244008. Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  Update Windows in Windows 7 will be not updated.

  Error code 80244008.

  Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  This update didn't install when I used Vista and is still unable to install now, I updated to Windows 7.

  Have searched for a solution for months with no result. Reason why I updated.

  Any help much appreciated.

  DOUGY,

  Microsoft SQL Server 2005 Express Edition Service Pack

  Post here for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  --

• My computer installed all updates for Windows (I was invited to do so). Now, I can not use citrix to access things. Frustrating

  My computer installed all updates for Windows (I was invited to do so).  Now, I can not use citrix to access things. Frustrating

  Supported Citrix or your COMPUTER administrator will be able to help with this.

  Look in the event log to see if anything relevant is registered.

  John

• given that windows 8.1 cannot be installed on some computers there will be always updates for windows 8 too?

  in view of the fact that windows 8.1 can not be installed on a computer because of this thing called about Virtualization reguirements... will microsoft always updates for windows 8? and also it will never upgrade to internet explore 11? cause, it seems, windows 8 does not have an upgrade to internet explore 11 Internet Explore 10.

  1. http://support.microsoft.com/lifecycle/search/default.aspx?sort=PN&alpha=Windows+8&Filter=FilterNO

  2. http://windows.microsoft.com/en-au/windows/lifecycle

• Try to install the update for win 7 error code windows service install could not be accessed

  I can't indtall a program

  Try to install the update for win 7 error code windows service install could not be accessed.  Insatller Windows is not installed correctly.

  Try to make sure that the Windows Installer service is running, or force start it.

  1 open run and type services.msc, and then press ENTER. You can also go
  to the Panel of control-> Administrator Tools-> Services.

  2. in the installation list services, locate Windows Installer.

  3. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.

  4. If you get the error trying to force starts the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  You can also give the following a try, make sure that you back up your Windows registry database before you try:

  7 How do I backup the registry in Windows

  http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx Change of the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.

• I try to install the update for Microsoft Works 8 (KB977304) security, but he has been unable to download. He said it failed because error code 646

  I try to install the update for Microsoft Works 8 (KB977304) security, but he has been unable to download. He said it failed because error code 646. If anyone can help me with this that would be great.

  Hello

  Do you work on your computer? Otherwise the control panel - Windows Updates - right
  Click on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.