My Photosmart C7250 stopped seeing my Netgear WPN824v3, but can still see others. It sees.

Similar Questions

• Photosmart 4700: stopped seeing my sd card

  I'm scanning photos. I put the sd card in the laptop to confirm that I had scanned all. I didn't so I tried to scan the bad pictures, and I can no longer get the photosmart to see the sd card.

  The SD card is well - she couldn't see before sd cards - I tried several size and and the age of the sd card.

  Is it possible that he is no longer lining up properly?

  Thanks, Bonnie

  Hi @tcstart

  I understand that your printers card reader does not work now. We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  If the problem persists, let me know and I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• My Windows 8.0 laptop screen is black but can still see white mice

  Hello

  My laptop screen is black after I updated to windows, and then did a registry clean up & optimization.  I tried to go into safe mode to try to overthrow windows reverts to its previous state feasible, but I can't get into safe mode.  I tried to press F8 or F8 and Shift together key but the windows loads normally, and then the screen stays black.  I can see the mouse and she is white and sensitive.

  Someone help please pointing me in the right direction of what to do to get it working again.

  Thank you very much.

  Ted

  Hi Ted,

  See if you can access the Windows system restore using the following method.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Choose a restore point at least 48 hours before the problem arose first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• have Netgear WN3000RP but can not connect to internet

  have the netgear wn3000rp Wireless extender hooked and on computer, but it wount connect to internet I can do

  HNO, it only fixing what can be done then?

  smlunatick is correct - you must have a modem/router wireless separated in addition to your wireless extension. Please see details here how it should be setup:

  http://www.netgear.nl/home/products/wireless-range-extenders/WN3000RP.aspx .

  You have such modem/wireless router? Please explain how you set up your network in what concerns your DSL access point (or equivalent), your PC, your wireless modem/router and your wireless extension.

  What happens when you try to connect to the internet? Please give error messages in its entirety.

  We need Details to help you better.

• iPhone Albums disappearing after restoration, but can still see in apps

  Hello

  I've recently upgraded to 7 iPhone and after the restoration of hard drive, back up all my personal albums disappeared from the photos app, but if I go into Instagram, VSCOcam or same wallpaper in settings I can see all

  Also if I go in all the photos in photo albums that either seem to be all mixed up top or not all there but if I go in moments all photos are here

  Before the backup to hard drive just before my previous iphone upgrade was usually saved on icloud, now when I turn it on just to check that I have the same problem on the old iphone 6plus oddly too

  I googled tirelessly and only found a topic on it years ago that never had an answer... anyone have any ideas? very strange

  Solved... just did a hard reset on the phone

• Photosmart 8250 works on Windows 7 comp., but can not find the box tool

  Hello

  I have a Photosmart 8250 installed on a Windows 7 computer.  The printer works well and I know now that the HP Solution Center is no longer available for Win 7 so no Toolbox is available here.   However, HPs link called "What Happened HP Solution Center in Windows 7" it is supposed to be a workaround which indicates the Toolbox should available in the Presentation/Services tab in properties or preferences, etc.

  My problem is that on my set up when I go into the properties or preferences, I can't tab called features, Services or Toolbox.

  Any body got any ideas how I can get the features or Toolbox appears in Windows 7.  Any ideas would be appreciated.

  Thanks in advance.

  grw385

  Hi @grw385

  It is there no Solution Center or the Toolbox for your printer under Windows 7. What happened to the Toolbox in Windows 7 HP?

  Installation of the printer software in Windows 7 for a USB cable connection Introduction

  The link above may be useful.

• my computer screen laptop dv6000 darkens but can still see graphics barely

  I have an older hp laptop which was awesome! It's HP Pavilion dv6000 Entertainment PC, and last week the screen been dark at startup. (not BLACK, just too dark to see much) It flickers light when I try to restart, then is back on the screen faded, dark. If it it restarts several times, it will ultimately be 'stick' on the spot. What is happening with it? Is there a solution? We have installed in Windows 7. Thank you very much for your help!

  Your a old school lighting (non - LED) which consists of an inverter and CCFL tubes. Here is a link to the guide of maintenance & Service that has a breakdown of the illustrated part

  Are the parties who may not be

  1) the whole of the screen. (research online. I saw them for @ $100.00)

  (2) the inverter of backlight (these fail more frequently than CCFL bulbs and display.) They cost about $15-25, 00.

  I would replace the backlight inverter Board first.

  If you want to do it yourself, then in every town or online, there are shops that it can do for you.

  I don't answer immediately because we probably live in different time zones and I want to sleep at night. I live in Europe.

  See you soon,.

  ERICO

• I bought Acrobat Pro teaching < removed serial number > it stopped working! I reinstalled but it still doesn't work! Help!

  Is there a new policy on existing software?

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990

• HP photosmart C7250

  When I scan a document with my photosmart C7250 it comes out as a photo and I would like to convert a PDF document, but I can't. What can I try?

  Hello Cal14, welcome to the forums

  I saw your post not being able to scan in PDF format. I took a screenshot to give you an example of what you should see, or similar when you scan with the print screen software. Please send me a screen shot the back of what you see and also let me know which operating system you are running.

  

  Happy Monday!

• Photosmart C7250 is incompatibility with windows 8.1 Overview operating system.

  I installed windows 8 pro from form to preview pro 8.1 windows operating system and now the Photosmart C7250 printer I've stopped working.  It seems to need revised drivers.  In addition, the HP Solution Center has stopped loading.  Any ideas when new drivers will be sent?

  Keep watching the web page for new drivers.

• Photosmart C7250: Win 8.1 duplexing

  I have a Photosmart C7250 (it has been a case of Costco with the included duplexer). I just got a new laptop and after installing the drivers through the HP download and install wizard, the thin printer print test page.  However it does not print duplex with the exception of manually.

  I looked everywhere and the solution ' open the printer, select the device settings and click installed duplex 'Yes' "is not an option.  The software does not recognize the duplexer is installed for me to choose this setting.  At least the Setup window does not present me with this ability.  I deleted and reinstalled the fixing of the duplexer at the back of the printer.

  Any help will be appreciated.  Thank you in advance.

  Hi @Gregorach,

  Thanks for getting back to me.

  Now I don't have your model of printer in my office to work with, but I managed to install the drivers to produce the following screenshots:

  

  

  I wonder if you have the most recent printer driver installed as mine was labeled differently (screenshot 1).  It might be useful to install this driver.

  In the second screen shot (which I accessed by pressing file / print / print preferences) Note that you can set up automatic double-sided printing. I think that's what the user guide instructions were referring in my first post.  Still, I can't test it to check, but I think it's more what you should see when you set up your print jobs.

  Let me know if it helps.

  Kind regards

• Photosmart C7250: Driver for Windows Vista

  My Photosmart C7250 worked well until two days ago.  Then, it would not scan a document.  Tried to uninstall the driver, who seemed successful.  Then at HP.com, but did not find the driver for Windows Vista.  Used the original installation disc, but that doesn't seem to help.  How can I get the current driver for Photosmart C7250 for Windows Vista?

  Hi @OldC7250,

  Welcome to the HP Forums!

  I see you are trying to find the driver for Vista for your HP Photosmart C7250. I'm happy to meet you!

  To download the software, please visit this site, HP Photosmart C6200, C7200 and C8100 all-in-one software full function and drivers.

  If it still does not after reinstallation, please give our HP print and Scan Doctor a try and let me know what happens!

  Hope this information is useful and thanks for posting!

• is it possible to use airprint on a hp photosmart c7250 all-in-one?

  is it possible to use airprint on a hp photosmart c7250 all-in-one? I'm running vista 64-bit

  Hello sherry36532,

  The printer you have came out before the introduction of the ePrint Airprint and and does not support these features. Here is a link to the supported printers known:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/cloud-services-supported-printers-eprint-AirPrint-print-apps/TD-p/351574

  You can try to download the HP ePrint home & biz app to see if it works for you. Some info on this app can be found at:

  http://support.HP.com/us-en/document/c01923321

• I have a hp photosmart c7250 all-in-one wireless radio does not work

  I have a HP Photosmart C7250 all-in-one and the Wireless does not work.  When I try to go through the wireless configuration wizard, the test report shows the following - 'the wireless radio does not work.  Contact HP support.  Can you help me?

  We will reset the printer.  Turn the power off, hold it # and 6 keys all on again.  Go to Configuration > network > wireless network Test later to see if it worked.

• Photosmart C7250, Radio working "failed."

  I can't get my Photosmart C7250 to connect to my wireless router or connect adhoc with my laptop.

  My "Wireless Network Test report" says that the "Radio works, failed. He also says "Radio on, spent. The report says to contact HP support. I turned this printer market several times. I also restored to factory several times. Here are the only options that I can see on this machine. Any ideas how to restore the functionality of this printer Radio?

  Try a hard reset: turn the power off, press and hold # and 9 keys while and a few seconds after turning it back on.