Windows will not burn to a disc.
When I go to burn my ISO of windows 7 Home premium on it, but for some strange reason, it does not work.
No matter what type of disk it is? IV tried to write about the speed the more low and all that simply, it does not for some reason any. Any help is appreciated. I have a disc that allows to work. When I put in it would load windows and lead me to an installation window. When I click on install it would lead me to a page and says I was missing some drivers. I guess it's because my old drive is scratched a lot.
Try to create a bootable copy on a USB key:
Once we have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a DVD or bootable USB (requires a blank DVD or USB flash to at least 4 GB key).
Follow the instructions:
Tags: Windows
Similar Questions
-
Windows Media not burn music to disc
My drive will not burn any disc music '. told me to go on the web to help nothing it its says that the original error code was COAAO5OE
All these only permits thanks for trying. Fix now by returning to an old Restore Point
-
Windows Media Player will not burn my files!
Media Player from my window will not burn my files on my blank CD rom. I add what I want in the colum burn and then I click on button (start burning) and try to start burning but 10 seconds later, it ejects my blank CD songs and pop of the screen upward to say that... (Windows media player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.) Please help me and understand what to do! Thank you
Hey Tashina_Jean,
Here are a few things to try:
1. make sure that the disc is clean.
2. Select a recording speed (write) more slow for the CD burner (recorder).
3. try a different brand of blank discs.
4. stop all other programs that are running.
5 disable any programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.
6. defragment your hard drive.
Links: what please refer:
To reduce the burn speed:
Change settings for burning a CD or DVD in Windows Media Player
For disk defragmentation.
Improve performance by defragmenting your hard drive
http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk
Also, see if the Update CD/DVD rom driver.
For driver updates, see:
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows 7 starter edition will not burn DVD and will not format
- My recorder DVD format player, will play and burn DVDs when I move my dvd drive to another computer running windows vista
- It will not burn a dvd or format a dvd rw disc when it is attached to my netbook toshiba running windows starter 7
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
Engraving for Windows 7 Info
If your computer has a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. Windows Burns discs in the active file system format or in ISO image format, depending on which disc format you choose.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Try to burn a CD. The system will not recognize the blank disc or let me burn__
Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted
Hello
Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.
If no joy:
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
My Windows Media Player will not burn a CD, it is 99%, then will not be finished. Used to work fine, no problems then just started does not. I tried Microsoft FixIT & or troubleshooting solved my problem. What can I do to fix this?
Hello
1. what error message you get when it ceases to burn a CD?
2 What problem confined to a particular CD?
3 did you change on your computer before the show?
4. have you tried Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter?
Method 1: Try a different CD and check if it helps:
Method 2: Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 3: Try to perform the clean boot and check if it helps, here is the link:
http://support.Microsoft.com/kb/929135
Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
-
Windows will not read the disc media
For some reason, windows will not read dvd or cd or the floppy one and the flash drives or cards of the camera with a usb drive. What would cause this and how then I get back to work? All media works on the other pc.
Always connect these devices to drive/USB card edge USB connection (for desktop Front panel USB ports); never use a connector of the control panel back or USB hubs.
Read the page and manually or just download & run fixit MS; It just automatically all the steps
http://support.Microsoft.com/kb/817900
With regard to the FDD. I'll say change the player as FDD get very often defective & now a days it is difficult to get a new one. For the majority of them are now short lived to over-exploitation.
Remember to answer.
S.Chatterjee
-
I saw that there are many other positions on this, and although I found others who had descriptions which were similar to mine, the patch did not work.
My specs:
Windows 7 64-bit SP1
H8 HP desktop PC - 1360t
My optical drive: DH16ACSHR
My driver for the optical drive is the cdrom.sys, the version of the file: 6.1.7601.17514, date 21/06/2006 driver
When I bought my computer, I did a clean install of Windows 7 64-bit. A ran all updates at once and drive perfectly serious. A few weeks later, it will not burn. I use Windows to burn simply .pdf files, and it gets to the point where it says 'burn', but after I click on burn the dialog box disappears. The drive makes noise and rotates the disk and writes data to it, but the dialog box never pops up or check the disk. It shows no more burn % completeness. If I try to remove the disc, the drive does not open. If I open with a paper clip, because the disk rotates, it sure is beating sounds and jams. When I open the drive and the drive, the drive clearly has written data to, but it cannot be read by other readers. It just says: the disc is no longer a Virgin, but I cannot see what is on it.
I HAVE ALREADY TRIED:
Remove/uninstall the driver
Checking the registry entry for the upper and lower entrances, THERE ARE NONE
Being run/scannow - Windows comes up saying that it could not find any problems, all right.
Update driver - he says I have the latest driver
Roll back the driver - he says that there is no driver installed previously
I had a HP Office before a different model and exactly the same thing happened then. When I first came to this other, it burns very well, so I thought that maybe it was a problem with the previous machine... but then after a few weeks it started doing the same thing.
I'm confused because when I look at the release date for the driver, it's super old, and he says it's the latest version... but Microsoft lists 50 updates to it at least between then and now, some of them as recently as June. I can't seem to find a way to download this driver common windows by itself and install it this way or the other.
I refuse to do a complete reinstall because I do not think that it will solve the problem more than temporarily. Within the company, it is the fourth total office with what has happened, and whenever we do a clean install, it works at first but then goes back to the same problem again.
Hoping someone has an idea where I can get a newer than 2006 for this device driver.
Hello
Hope the following patch helps:
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Good luck.
-
I can not burn an Audio disc with Media Player 11
My system = XP (SP3), 3 GB of RAM, Intel CPU G620Media Player 11 will not burn a playlist.
I dragged a list of MP3 files to a playlist for burning. However, when I click on the button burn, WMP11 starts to burn apparently the first track on the list but then stops at 96%. I tried at different speeds, the media and even a CD - RW and the same thing happens.Curiously, that WMP11 is burning track 1, the progress bar indicates "finalize disc". This would seem a strange message because it is just the first piece of 10 and so has not yet reached the end of the list.After the burn hangs at 96% for a few seconds, I get the error message;"Windows media player cannot burn the files to the CD. Check that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs.HOWEVER, I also have NERO 7 and I have absolutely no problems burning the same Audio disc.It's extremely frustrating and I would appreciate some advice on this.I decided to go back to WMP 9 and then reinstalling WMP11
Now, everything works as it should!However, I found an absolutely terrible navigation in WMP11 - sometimes I don't know where to go for a task. Nero - although his gripes - is a breeze in comparison. -
My windows will not recognize my CD/DVD drive
My computer crashed recently and since then windows will not recognize my CD/DVD drive. My removable disk (e :)) is there, but I was told that windows cannot access the disk.) Also when I try to eject a developed error warning.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
Win7 dvd & cd maker will not burn for all formats
Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.
The version of the audio driver is now 6.1.7601.17514
The modem is Conexnt
VGA driver nVidiaMotherboard is: NVIDIA
Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.
The version of the audio driver is now 6.1.7601.17514
The modem is Conexnt
VGA driver nVidiaMotherboard is: NVIDIA
===========================================
Windows 7 what app do you use to burn video DVDs
and video CD?Have you tried to use DVD creation in Windows 7 to burn your DVD?
Read the following article.
Windows 7 - burn a video DVD with Windows DVD Maker disc
http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
(Windows 7 Home Premium / Professional / Ultimate / Enterprise) -
my screen is blue and the playlist will not burn to a cd
try to burn a playlist to a cd. Playlist will not burn.
You use a PC or a Mac - I can then ask for your message to be moved to the iTunes for Windows or iTunes for Mac forum
-
Satellite P10: The drive will not burn DVD
Hope someone can help me,
I have a Toshiba Satellite P10 and have just received some photos software, burning
But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.
I have the Nero log file failed
Done if it's any help to anyone.A big thank you Michael.
Hello
What about different DVD media? Have you tested the media DVD-R or DVD + R common?
Have you tried different brands of DVD?
I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
So I think you should check different DVDs. -
V 32 b - cell Hp Constant reboot Windows will not open windows / can I buy w7 or 8 and be ok
I turned on my Hp laptop after a safety closing, and I get a blue screen that flashes if quickly, you can not read. Then brings up the screen safe mode reboot. Try to start one of these options just brings me back to restart it even safe mode. (Does restart any mode). I tried f8 and I donot have the repair option. In the start-up/safe screen, it says use my drive to repair, but laptop was bought with windows already not downloaded so no disc. If I know that all previous updates have been run to buy windows 7 32B and just upgrade? Or will I have the same problem?
Discussions were merged.
Deleted duplicate.
Unplug all devices - printer, mike, etc...
Have you tried going back to the last good Configuration to know when the screen appeared?
Changed the mode of the boot drive SATA?
http://support.Microsoft.com/kb/922976
Can you remove the hard drive and move it to another computer running Windows Vista? If so, you can then run CHKDSK or create a dual-boot configuration.
https://techingiteasy.WordPress.com/2012/03/05/How-to-dual-boot-Windows-Vista7-and-Windows-8/
Step by step guide on the parallel Installation
http://vistaultimate.WindowsReinstall.com/parallelinstall/index.htm
(1) precaution to determine it is not a Boot Virus.
Follow the steps in this article - use Windows Defender in offline mode
How to remove a boot sector Virus
http://www.WikiHow.com/remove-a-boot-sector-virus
Have you looked on the HP site for downloads driver your computer check if the recovery discs are available? You can order then re-partition and reformat your hard disk and reinstall Windows Vista.
-
Windows does not recognize a blank disc in the DVD player.
When you try to burn a CD and have a blank CD - R into the DVD player, I get 'Windows cannot read the disk in drive D ". I tried other discs and DVD, but it seems that Windows does not recognize a blank disc. I have another DVD drive and the same is true here as well. I tried to update the drivers and deactivation and reactivation of readers but nothing is done. However, CDs or DVDs with the content are recognized.
I had the same problem on Windows 7 32-bit (suspect this fix as well under Vista). After trying everything under the Sun entered Services (search for programs and files, type 'Services') and looked "Shell Hardware Detection. Found that it was disabled (not sure how he got that way). Right-click on it to get the properties. Change startup type to "Automatic", press apply then OK. Problem solved without even having to restart!
Maybe you are looking for
-
Can I limit only usable with wifi safari?
I'm trying to limit my child phone only access Safari when wifi is available. Is this possible without having to buy a parent program safe?
-
I was testing calls to a Solr index with different URL query parameters. But whenever I have a setting and reload the page, instead of making the call again once I fell into Google search. However, if I have (laboriously) manually change the URL to a
-
Satellite Pro m USB devices connection problems
Hello visitors and insiders. can someone help me, please? - or are the causes of the problems of programmed BIOS is not perfect? I put on the USB Ports (I tried all 3 Ports) after correct installation of the most recent drivers for devices and the BI
-
Satellite A-C50-1DV - replacing a graphics card
Hypothetically, if I wanted to replace the graphics card in my C50-A-1DV Satellite, how would I go on this subject? And if I had to send my laptop, how much would it cost?
-
Bootcamp driver keyboard + mouse has yet...
Now it's serious, after having prepared the bootcamp of El Capitan, reboots, and installation of windows 7 pro, all very well winninstall usb + usb media bootcamp. First boot, configuration of my name, no. KEYBOARD WITHOUT MOUSE... no RM Apple or PC