Windows Wireless Network must be started manually after you start the computer to the top.

Similar Questions

• Windows Media Player 12 does not work after you choose the initial settings

  Hello
  I tried to use windows media player 12 on my computer laptop windows 7 and it won't work. It worked the first time and I chose my settings, but it would not open the player itself. I tried to do it on the guest account, but it's the same thing. Does anyone know how to fix this? -Chris

  My post was actually in response to JRTLOVER:

  Why we cannot uninstall and reinstall from the CD just Media Player... or is there a way to fix this?

  I have seen that it was already proposed earlier in this topic, my apologies.

  Regarding your problem, have you tried to launch directly executable WMP? To do this, click Start, type wmplayer.exe in the search box and press ENTER.

  You should also check if WMP is already running: start the task (Ctrl + Alt + Delete) Manager, look for one or more elements called wmplayer.exe on the process tab, select each item and then click end process , then try to start WMP again.

  Tim Baets
  http://www.BM-productions.TK

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• blocks of Lightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

  blocks of ightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

  Turning off graphics acceleration. Go to preferences-> Performance tab and uncheck the box there.

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?

  The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?  It certainly is learning to be OVERLOAD on these messages and would like to know if it is OK to remove them and what to do to STOP these messages.  I asked the program and I've been accepted/approved/reassured that will ship a copy - JUST WANT TO KNOW IF I CAN REMOVE THIS sort of THINGS NOW, OR should she REMAIN ON MY COMPUTER?  It's the only question I have that needs to be answered. Thank you

  ybliku2

  Since early may, Microsoft began providing updates prerequisite for these systems for the upgrade. Known as the get Windows 10 app (GXW) this KB update installs the mechanisms to verify your system readiness and download Windows 10 through Windows Update. Users will see a notification added to the taskbar allowing users of the availability of the operating systems and of the possibility to book the update and download automatically on July 29^th 2015.

  You can also download Windows 10 as one. ISO file and do the upgrade manually:

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

• Keep the network discovery settings after you restart the Server R2 Standard 2012

  Hi all

  I'm having the following problem. After you restart the server from the network discovery will go off. Therefore, I do not see the server, this can cause problems in the future, so I need to know how to keep on even after network discovery settings server restart.

  Thanks for the help!

  Hi, manual,.

  I suggest you post your query in the following forums to improve assistance in this regard.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Thank you.

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Windows Explorer opens whenever I start the PC

  Hello

  I bought my lenovo laptop u410 a few days ago and yesterday the office system map begins suddenly after I booted up.
  How can I stop this? I searched the internet, but none of these solutions work.
  I looked at my card to start, but it is empty. Also, I looked in the registry editor, but unfortunately no luck.
  Can someone help me please? Thank you!
  Original title: desktop card system suddenly starts up?

  Your problem is

  Windows Explorer opens whenever I start the PC

  - - - -

  I suggest that you change the question - just click on the Edit link, you can see right under him [almost where I would be selecting the link address instead].

  - - - - - -

  Also, check these settings: -.

  1 in Windows explorer, Union, file & search options, see tab, [down] restore file when connecting windows - make sure that is not selected.

  2 click the Start button, the cursor on the entry for all programs, right click, select Open, double-click programs, double-click Startup - check that you don't have a Windows Explorer shortcut it.

  3 click the Start button, hover over the entrance for all programs, right-click, select open all users, double-click programs, double-click Startup - check that you don't have a Windows Explorer shortcut it.

• Hi, Windows server 2008 R2 has become UN-reachble site intermittently, after you restart the firewall service, its become accessible from the outside. I have the firewall.

  Hi all

  I use windows Server2008 R2 for IIS7 hosting. But I have to deal with the problem of accessibility to the network intermittently. I have the firewall for external field like inside. I have observer that after you restart the server, windows firewall service was once again the reachble.

  Here I DNon able to understand where is the problem of acutal, becuae I don't see any event or services stop or hang the event.

  Thank you best regards &,.

  Anil

  Hello

  Welcome to the Microsoft Community Forums.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  Hope this information helps.

• Windows says FireFox must be updated but cannot be because the two instances are running, which is not true. It happens everytime I open FireFox

  Windows says FireFox must be updated but cannot be because the two instances are running, which is not true. It happens everytime I open FireFox

  This has happened

  Each time Firefox opened

  == June 28 2010

  Firefox 3.6.6 came out on 26/06/2010 to solve problems that some were plagued with the new crash protection feature introduced in Firefox 3.6.4. NOTE: Version 3.6.5 has been used for another product, so there is a "jump" in the version numbers.

  You need to update to the latest version, Firefox 3.6.6.

• Windows Vista Service Pack 1 was a success; However she was showing as unavailable after you restart the computer.

  * Original title: Vista 32-bit SP1

  I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.

  I will certainly help you with this issue.

  This problem may occur if one of the following conditions is true:

  a. a program on your computer interfered with the installation of the service pack.

  b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Here are a few articles that you can consult in order to solve the problem.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues 

  How to obtain the latest Windows Vista service pack 

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions 

  Solve the problems when you can't install Internet Explorer 9

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• Cannot install flash player. After you download the Adobe FLash Player installer and running, a gray pop-up window opens but nothing does not appear in it. There is no progress bar or whatever it is.

  Cannot install flash player. After you download the Adobe FLash Player installer and running, a gray pop-up window opens but nothing does not appear in it. There is no progress bar or whatever it is, and even after keeping it running for a long time, there is no progress. Please help with this question.

  Hi Rlap,

  We are aware of this problem and are working on a fix.  In the meantime, please use the offline installation program, displayed at the bottom of the help page corresponding to your operating system and browser:

  • Installation problems | Flash Player | Windows
  • Installation problems | Flash Player | Mac

  Installers are at the bottom of the page, in the section "problems".

  --

  Maria