Windows Xp 64-bit updates

Similar Questions

• Two Windows 7 64 bit updates do not. (KB977074) (KB976972)

  Two Windows 7 64 bit updates do not.

  Update for Windows 7 for x 64-based systems (KB977074)

  Update for Windows 7 for x 64-based systems (KB976972)

  Error details: code A 80071, 90

  It's the third day, they fail to install.

  OS is Windows 7 64 bit

  Processor: Intel Core 2 Quad CPU 2 .40GHz

  Installed memory: 4.00 GB

  How can this be repaired?

  Hello

  Copy the file "C:\Windows\Logs\CBS\CBS.log" (otherwise you can not open it) in your documents folder and open it with Notepad. Now I get errors. Errors that you see?

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  It is correct. I found the answer here http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6ee6ede7-7f6a-47dc-9562-acd08615532b
  I had to install updates one at a time.

• dv8000z Windows 7 32 bit updated to XP and the noise disappeared.

  My dv8000z has been upgraded to Windows 7 32 bit and the noise disappeared. I installed sp35908. When I ran this program as a Vista 2 that it will fail to install, with comment, message "cannot find the MEDIA device for the driver. Any advice?

  Hello:

  Try this driver.  If it does not install automatically then proceed to the next step.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46818-1 & CC = US & DLC = in & LC = on & os = 2093 & Product = 1147474 & sw_lang =

  Conclusion of any windows error.

  Go to Device Manager and click on the multimedia audio controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software, and at the bottom of this window, let pick me from a list of drivers for devices on my computer.

  Select disk, and then navigate to: it\: SWSetup\sp34567\CPL309Ba and select the Conexant AC-Link Audio device from the list and see if the pilot goes like this.  Reset.

• Windows 7 64 Bit update error Code 8E5E03FE

  I just bought a new PC running Windows 7 64 bit and made my first run updates of Windows very well, that everything installed OK. Then, most of the updates and everything I try they fail with "Error 8E5E03FE", help on Windows itself is absolutely useless with this problem and I tried almost EVERY solution I can find elsewhere on the internet for the same problem and have gotten nowhere.

  I tried to install the updates with a clean boot and firewall off etc which did not help at all. I also tried to download the files manually from Microsoft Download Center and every update still does not work.

  My system is BRAND NEW, so I don't understand what the cause of the errors and four updates are updates to security I want to install successfully.

  Any help anyone could offer would be appreciated.

  Once more the error code is 8E5E03FE and numbers that are not updated are:

  KB982526
  KB972270
  KB975560
  KB979482
  KB980218
  KB979099
  KB974431
  KB980408
  KB980846
  KB981793

  Thanks in advance.

  Try this-

  1. Click the Start orb, type cmd in the field search programs and files , right- click cmd.exe, and then click run as administrator. Accept the UAC prompt.
  2. At the command prompt, type the following commands and press ENTER after each one. Please include spaces as orders must be exactly as planned. You can right- click on the prompt and paste these, too:

     net stop cryptsvc
     Ren %systemroot%\system32\catroot2\edb.log *.tst
     net start cryptsvc
     output

  See if the system can update now. If it still can not, please copy & paste the last lines of 50 or more WindowsUpdate.log in your response.
  How to read the Windowsupdate.log file

  MowGreen Services update - consumer safety

• Windows 7 64-bit updates KB980408 and KB981793 fails with the error code 8007065E and 800 b 0100

  KB980408 updates Windows 7 64 bit and KB981793 fail with error code 800b0100 and 8007065E respectively.

  Help, please

  This is a fresh (blank) load, THAT No. SW Antiviral has been installed.

  I see. Start by reading...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section ofhttp://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After that initial Windows 7 64 bit update later, unable to connect to services window or microsoft...

  Just purchased and built a new computer at the beginning of March. Windows 7 ultimate 64 bit installed and ran the updates immediately. I realized last week that I couldn't connect to a lot of windows and microsoft services. are examples, IE x 64(but the regular one works?), zune Installer (just service does not work try again later), online help windows (cannot connect), but probably the most important is windows is a no go (gets and error message: Windows update cannot check the updates because the service is not running.) You may have to restart your computer)
  

  Please help, as I said I'm under 64-bit Windows 7 Ultimate, the update I had seems to be KB979306 on March 3, 2010 (of course all my updates say March 3, 2010, but is the top of the list, so I guess that's the most recent).

  Thank you for your time and any advice you can give.

  no anti-virus or anti-spyware still...

  Not good! See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• WINDOWS VISTA 32-BIT UPDATES

  CAN SOMEONE HELP ME GET UPDATES FOR WINDOWS VISTA 32 BIT?   I AM NOT GETTING THE ERROR CODES, JUST CONTINUES ON THE LEFT SEARCH BAR RIGHT AND DOES NOTHING. NOTHING IS FOUND TO DOWNLOAD. I'VE NEVER HAD THIS PROBLEM.

  Hi BluesBlaster:

  If your initial "check for updates..." Windows Update crashes during long periods without raising an error, this is a widespread problem currently affecting many users of Vista SP2.

  Some users find that "check for updates..." will be finally run full if you let run for several hours, but there is also a workaround solution posted on the page Web of Dalai to http://wu.krelay.de/en/ that accelerates the Windows Update for the affected users. Of workaround requires users to pre-install the kernel-mode Windows updates (Win32K.sys) driver listed on this Web page, if one is missing from your system before running Windows Update.  I used Dalai for the latest Patch workaround three Tuesdays (the second Tuesday of each month) and has reduced my search for 'check for updates...' updates available for 6 or 7 hours up to approx. 25 min.

  Step-by-step instructions posted on 16 June 2016 wire m #l's updates does not, it was the search for updates to the hours are based on workaround of Dalai and will guide you through the installation process of packages update stand-alone (.msu files) for your updates Win32K.sys missing.

  As of today (11-Sep-2016) the current list of updates Win32K.sys on the page Web of Dalai is: KB3078601 (rel. 18 August 2015); KB3109094 (rel. 7 December 2015); KB3145739 (rel. 12 April 2016); KB3164033 (rel. June 14, 2016); KB3168965 (rel. July 12, 2016); KB3177725 (rel. 9 August 2016). Just install the updates that are not in your system, so if you have been fully patched at the end of July 2016 you must have to install manually the last KB3177725 (MS16-098: a security update for the Windows Kernel-Mode drivers: 9 August 2016) before you run Windows Update to install your remaining August 2016 Patch Tuesday updates.  List of Dalai will probably be revised tonight next Tuesday when the September 2016 Patch Tuesday updates (and a new version of Win32K.sys) are released on 13-Sep-2016, then you might want to wait a few days to try this workaround.

  Dalai has posted general information at http://wu.krelay.de/en/info.htm which explains why the Windows Update Agent (WUA) is currently suspended during the "checking for updates..." Windows Update.  The current v7.6.7600.256 Vista, C:\Windows\system32\wuaueng.dll WUA has not been updated by Microsoft since June 2012.
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Windows vista 32-bit update service pack 1 error 80073712 when I try to install.

  I tried and tried to install the updated Windows vista 32 bit service pack 1, but also try to update manually, however I continuously get the update error 80073712. I tried the scan tool update service, troubleshooting automatic on the Microsoft Support Web site, as well as research on the Microsoft Answers site for more assistance. However, I still have the same problem, then what else could be the cause so many dell used laptops for not updating this service pack. Either way, I haven't installed service pack 2 either, as I mentioned on some of the answers.

  Microsoft says that the operating system is corrupt, so SP1 or SP2 fails. Follow this link for repair.

  https://support.Microsoft.com/en-us/KB/957310#/en-us/KB/957310

  In addition, the article is ok, but he fails to mention that, after analysis of the Sfc runs, must complete the process.

  It is, done Sfc, you must also type: CHKDSK C: /F agree to restart, type: EXIT

  restart the pc... When the computer reboots, the repairs are installed/fixed, w/o this cmd, just retry the update is not

  possible, installations/repairs, can take place only when the pc is restarted...

• Impossible to update nVidia-display-NVIDIAGeForcenForce630i/Windows 7 32-bit update

  My HP s3600t computer came installed in Vista 32 factory (I think).  However, it is upgraded to Windows 7 32 bit and now the automatic Windows Update continues to offer the upgrade option, but fails to install it.

  If it does not work via Windows Update, you can download it directly from geforce.com

  Download the latest driver for Windows 7 32 bits here

  http://www.GeForce.com/drivers

  Looking for the nForce Driver Version 15.56 nForce 630i (or use the auto function of detection if you are not sure.

• the failure of several windows 7 64 bit updates automatic

  bought a dell desktop computer refurbished with windows 7 64 bit operating system, service pack 1. When running updates automatic for the 1st time it finds, downloads and installs updated 58 and finally fails to configure the changes made to the operating system so it reverts to the previous settings. Why can't the updates work?   View these latest updates installed page it shows about 5 updates managed 58. Why?      When attempting to install and configure updates of the 2nd about 4 times more successful again. Why?

  Thanks for the help but it turns out that my Norton Security blocking updates of windows configuration of my system once they have been downloaded and installed - I just had to temporarily disable the auto protect, protection sonar, smart firewall protection and intrusion and updates all the configured successfully.

• My KEY will not work for both windows 7 32-bit update and 64-bit version?

  I have two, a copy and a key for the upgrade to Windows 7, 32-bit and 64-bit.  (Key separately for each version, purchased about 6 months apart.)

  The computer that is running the 32-bit version had a hard drive failure.   After replacing the hard drive, I decided to install 64-bit on this computer using the key provided with the 32-bit version.

  I was led to believe that the key is not related to the 64 or 32 bit version and that it could be used for both, but only installed at the moment.

  After getting to step to enter the key, using the key provided with the 32-bit version, he couldn't say invalid key.  After several attempts and checking of typo, it's a no go.

  So, I went and started around and installed the 32 bit version and the key worked fine.

  So the key provided with the 32-bit version of 'upgrade' tied to only this version?  Every search I do, says that you can use the key for 32 or 64 bit.  They never mention the version "upgrade" is different from the "full" version

  Thanks for any info,

  SDM

  Because it is an upgrade version.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  So using phone activation is the work around:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to install Windows 7 32 bit, updated to 64-bit

  Hi, using windows 7 32-bit for a year, but I like to upgrade to the 64 bit version, my info is required system. {processor intel dual core 3.00 ghz, 8 GB ram, 2 GB NVIDIA graphics card,} so for all these requirements may be able to install the 64-bit, although I tried once to install but it says I can not confrtable in this version.so what can I do, please help me on this problem

  You need to boot from the disc, by setting your BIOS to do. I have provided these instructions in my previous answer. Remember, there is no way to upgrade from 32 to 64-bit, it's pure install only.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  How to load BIOS and change Boot Configuration

• Windows Vista 64-bit of Windows 7 32-bit update?

  G ' Day,.

  I've seen a lot of Windows Vista 32-bit to Windows 7 64 bit upgrade questions, but that the opposite?
  I just moved houses, and I think I lost my CD of 32-bit of Windows Vista, but I found my 64-bit of Windows Vista CD and I am wanting to buy Windows 7 Uprade but only to install the 32-bit version.

  You can do in the modernization of the place of Windows 64-bit to 32-bit Windows, and vice versa. Its a clean install only. I suggest that you use the Windows Easy Transfer utility included on the DVD of Windows 7 to create a backup your personal files.

  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• windows 8(32 bit) windows 8(64 bit) update

  Recently upgraded to windows 8(32 bit) to winXP, but now I need 8(64 bit) windows please how to download and install from the site.

  During Installation, there is no option available for 32 / 64-bit version of windows upgrade. Please explain the procedure to do so.

  Hello everyone,

  If you want to install Windows 64-bit, but you do not have DVD and you are currently running 32-bit Windows, you must download ISO to another PC running Windows 64-bit (for example from Windows vista 64-bit or Windows 7 64-bit), if you do not get another PC on any 64-bit Windows, you will not be able to download 8 64-bit Windows.

  The link below, you can download Windows 8-64 bit (from Windows vista or 7 64-bit as I mentioned), you will need your activation code.

  http://Windows.Microsoft.com/es-MX/Windows-8/upgrade-product-key-only

  Kind regards.

• Where can I download preparation tool (Checksur.exe) system for windows Vista 32-bit update?

  Windows Update was giving me problems and would not install 5 updates as a result of an error on the search for a solution I found that I need to download (Checksur.exe) system update readiness tool but the only ones available are for and 86-64 bit systems. Mine is a 32-bit system I can download (Checksur.exe) system update readiness tool?

  the only ones available are for and 86-64 bit systems. Mine is a 32-bit

  32 bit is the same as 'x 86', so you can use the x 86 one.

  System Update tool - all supported x 86 Windows Vista versions:
  http://go.Microsoft.com/fwlink/?LinkId=167357

  Description of the system update tool:
  http://support.Microsoft.com/kb/947821