Windows xp automatic camera detection

Similar Questions

• I can't disable WPAD (the windows proxy automatic detection) on my Windows 7 HB32.

  Hey guys,.

  I can't disable WPAD (the windows proxy automatic detection) on my Windows 7 HB32.

  In connection settings I have to disable the option "automatically detect connection settings", but after some time (or two days), this option becomes available again.

  Is it possible to completely disable WPAD on Windows 7?

  Thank you

  Anton.

  Hello

  Have you made changes on the computer before this problem?

  I suggest you to go through the following method and the Coachman.

  How to disable the automatic proxy caching in Internet Explorer. http://support.Microsoft.com/kb/271361

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

• Windows Media Center cannot detect the error DVD Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD into the drive

  Original title: why Windows Media Center does not detect my DVD?

  I built my computer motherboard ASUS P658D, Intel i7 processor clocked at 2.6 gHz, 12 GB RAM, 750W Corsair PWR. power, Windows 7 Home Premium 64 - bit & ie9. When I put or the other two DVDs in one of two DVD players, Windows Media Center appears and when I click on "Play DVD" Media Center give me a window that says:

  "Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD in the drive." Two DVDs, I've tried are educational for DVD

  my Nikon D300 Digital camera and a family video DVD or both these very well play in a bed of same computer running Windows 7 Professional 64-bit, & ie8.

  I tried Microsoft Fixit, no help. I tried to send Microsoft Support, and I got NO HELP. I did not bring any changes, and installed any program, just

  scoured the internet. A DVD player is a Sony Optarc with Microsoft Driver, the other is ASUS. I also tried to use Windows Media Player but nothing

  rises or it returns me to Windows Media Center and it does not detect to play either of my DVD. How can I get help here, or from Microsoft? Thank you.

  No, there is no yellow warning in Device Manager and the device manager says that two DVD players work properly. Mr. Fix it's

  automated download from microsoft that is supposed to automatically fix some problems, but he provided no help here. I think it is more likely

  that there is a problem with Windows Media Center or Windows 7 Pro 64 bit and either of my two new Sony DVD drives

  and ASUS.

  I thought my way in a solution. My thought was: Device Manager indicates DVD players work properly and both are new and we're Sony, and the other ASUS so I think only an unlikely problem with readers. The problem is with Windows Media Center "do DETECTED is not the DVD. So there must be a problem with Windows Media Center. I thought that I might need to reinstall Windows 7... then I thought that maybe if I just reinstall Windows Media that will work. He did. My problem was:

  Start > Panel > programs and features > features on or off Windows activate > then uncheck the box for multimedia functions > restart the computer > and then re-check the box to restore the multimedia features > now both discs play both DVDs, I tried. Both disks are operating normally. Reinstall the characteristics of media Windows 7 resolved the problem. Thanks to all who offered solutions.

• Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

  I use a laptop and move between two locations each with its own printer.  Whenever I move, I have to change the default printer by opening printers & faxes from the control panel.  Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

  Hi Tom,

  If the default printer is not in offline mode, it will detect the different printer but it will not be a default one.

• Is windows media player can detect the songs that are out there, more than double and remove them, or not add syncing and if so HOW?

  During the synchronization of music files, you have 3 questions,

  1-WHY some said files already added to the device, even if the memory card is empty?

  2-is there a way to configure windows media player to detect songs appearing twice and automatically delete them or just simply not add syncing?  IF Yes please let me know how.

  3-How do you stop sync everything in windows media player when in sync I put only some songs, but it always adds all the music, 5 star music AND photos?  How we prevent that?

  Hello

  Follow these steps and check if they help.

  Step 1:

  You can re-create the database of Windows Media Player and see if that fixes the problem.
   
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
   
  a. exit Windows Media Player.

  
  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  
  c. Select all files in the folder and then click on Delete on the file menu.
   
  Note You don't have to remove the folders that are in this folder.
   
  d. restart Windows Media Player.
   
  Note Windows Media Player automatically rebuilds the database.

  Step 2:

  
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
   
  a. exit Windows Media Player.
  
  b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.
  
  c. Select the Media Player folder, and then click on Delete on the file menu.
  
  d. restart Windows Media Player.
   
  Note Windows Media Player automatically rebuilds the database.

  With respect to the timing, I would have you read the following article.

  Windows Media Player sync: frequently asked questions
  http://Windows.Microsoft.com/en-CA/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

• keyboard no one and several windows opens automatically

  The last few days Ive seen the following problems with my laptop:

  1. on a normal startup

  several windows open automatically without prompting to the keyboard. The first window is usually the Help window, and then opens the default browser window as well. 10 - 15windows opens in a duration of one minute and continue until I manually closethem or at the end of the process in the Task Manager.

  This experience on the admin user and others

  2. Alternatively on the boot of startup window stops and asked to choose an operating system.  This machine has only win7 on it. no option cannot be selected as keyboard stubbornly inactive you.

  3.

  If by chance the machine decides to start, I can not connect to the user, because the keyboard is not responsive

  If I get the admin user for which I have no password... anything can be typed keyboard non-responsive rest like a potato.

  It seemed that the keyboard was defective, so ive got changed, but the problem persists.

  Help, please.

  Of course, it looks like infections are present.

  Run ADWcleaner https://toolslib.net/downloads/viewdownload/1-adwcleaner/ it's free and one of the only malware cleanup tools that I trust.  Malwarebytes can be used, but be careful to not take the trial or use the pro version.  Virtually all the removal tools known as maleware are in themselves of malware.

  If you are unable to get sufficient control, download ADWcleaner into the USB port on another computer.

  I assume you mean to Internet Explorer (IE)?  If you are, reset

  Tools, Internet Options, advanced.

  Multiple OS question at the start is usually someone re - install Win7, but unless you first delete the existing partition.

  Now, this is a controversial subject, but your choice of AV software may be something you want to take a 2nd look.  I suggest you visit this website to get an idea of what AV software made the best work, depending on what type of user you are: http://www.av-comparatives.org/ is a non-profit that has been around for a long time and I hope that their results.

  When you interpret these results, remember the difference between a product that detects 95% and the other 99% of infections, it is actually 5 times more likely to allow an infection.

  I care about 140 Windows PCs and I have more than 13 years.  Until last September, the only AV software that I would allow my clients to use was Norton Antivirus.  Note that this is not the same as any other product, Norton 360 or Internet Security.

  Last September, Symantec (Norton owner) decided to no longer sell such a product.  After much research, I decided on Bitdefender Antivirus 2015 +.  I installed it on more than half of these PC so far and has never been a problem.  In fact, I think it's a better product than even Norton.  One of the things I love the most about it, is the silence and discretion.  It is also cheap.

  My customers know that if they install any product of 'Internet Security', I won't work on their computers until it is deleted.  Very well, I learned the hard way that the other components of these products (other than the AV itself) IS caused more problems than any profit that they bring and work primarily by stopping the Windows component that does a very good job of this particular task still.  My problem is that when I started to work on a computer with an IS on it, I could spend hours trying to diagnose the problem, only to find out that by taking the product of the IS, the problems have become much clearer and easier to solve.  I think that the product of the IS actually hides the problem.

  As I said.  It is a controversial topic and you will find many different very strong opinions.  I know that mine is based on a fairly large sample over a long period, and are consumers of consumer type Windows.

  Another thing you need to know: you can delete not entirely of most any AV software simply by using the standard uninstallation tool Windows 7.  Most of the majors also publishes a "removal tool" that gets the rest.  If you do not completely remove it, it will cause very hard to understand and diagnose problems.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• 6 Lightroom does not recognize my Nikon D700 in trying to use Tethered Shooting.   I have the right cable to attached tools I think. It happens with no camera detected.   Camera is on.

  6 LightRoom does not recognize my Nikon D700 DSLR.   I have connected the PC to my DSLR using Windows 10.   I entered the program 6 of Lightroom and selected "file/Tether Capture / captive Start Capture."  He then says "No Camera detected"

  I think I have the right cable attached. It is a 5 Pin mini-cable USB 2.

  The mini USB camera works, I think.  I uploaded photos from the D700 to my computer before.

  When I connect and disconnect the tie between my laptop and the D700, computer one problems

  sound of Bell saying he acknowledged a connection to the laptop device.

  What could be wrong?

  Thank you!

  Len.

  Hello

  Please upgrade to the latest version of Lightroom, and the question to tie with El Capitan will be resolved: keeping up-to-date for Lightroom

  Kind regards

  Tanuj

• I get the pop-up windows and windows that automatically open on my browser, how can I solve this

  I get the pop-up windows and windows that automatically open on my browser, how can I solve this

  Do a scan for adware with Malwarebytes: http://malwarebytes.org/antimalware/mac.

  (copy and paste the link above into the address bar of your browser).

• Helix camera detected (front and back) not at all

  I noticed the cameras in my Helix, which had worked very well, are not dertected by Skype. So I checked the Device Manager and there is no camera detected. I downloaded the driver from the support site, and when I installed the process was interrupted once the command prompt open with the message "cannot find device." When I open the camera app, it is not detected here either.

  Everything on the forum seems to be a problem with the front or rear in front of the camera, but not both. Can someone help me with this? And if it's a hardware problem, can I have rectified in Pakistan?

  Nice day.

  Your test of Ubuntu, you may be right on a hardware failure or disconnection.

  If you do not see what is involved in the opening of the Tablet, take a look at the manual of your equipment:

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles_pdf/helix_hmm_en_0c10337_03.PDF

  Page 54 shows the connection of the Assembly of the camera.

  I hope this helps a little.

  Kind regards.

• Who remembers the name of a set of Japanese tile that came with windows 98, or came with the windows over the package?

  Who remembers the name of a set of Japanese tile that came with windows 98, or came with the windows over the package?

  Hello

  The set of tiles you speak: Desktop Taipei. This game is built with Windows 98.

• Updated Windows 10 anniversary - camera stay connected - Powershot SX530HS

  Microsoft, in their wisdom, has broken the link with my camera and their most recent, like big update.  "It allows to work."

  When I connect my camera to my PC, the device says it's connected, and my computer starts the camera window.

  BUT by the time camera Windows finishes loading, the camera is already disconnected and closing the window of the camera because the camera is disconnected.  The camera turns on, it just disconnects.

  I can't remove my PC camera device because it does not appear until it is connected.  And even then, it disconnects after about 30 seconds.

  Any ideas?

  Thank you...

  If anyone has this problem - mine, just start the configuration of Wi - Fi in the Canon Utilities.

  In doing so, turned on my camera to connect to my PC and I managed to upload photos once again without any problems.

• When I double click on a folder, a search window opens automatically.

  When I double click on a folder, a search window opens automatically instead of the usual view of Windows Explorer that displays the contents of the folder.  I must in order to display the contents of the folder, right click and select open, then I can see the contents of the folder.  What setting do I change to stop the search engine to open and have the regular Windows Explorer mode appear?  Oh, when I right click in the folder, the search option is bold, but the open option is regular.

  Doug Knox fix - http://www.dougknox.com/xp/scripts_desc/xp_folder_open.htm
  Search Companion starts if you double-click a folder or computer drive - http://windowsxp.mvps.org/searchwindow.htm MS - MVP - Elephant Boy - Don ' t Panic!

• can I delete login page so that windows starts automatically when you first start?

  can I delete login page so that windows starts automatically when you first start?

  Yes, you can.

  See http://windowsxp.mvps.org/Autologon.htm

• Restart computer, windows xp screen came then the screen turned white

  Restart computer, windows xp screen came then the screen turned white

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error at startup of the computer?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.