Speakerphone X120e problem

Similar Questions

• New X120e: slowdown in hard drive problems

  Hello. I bought a brand-new x120e last month and I feel stutters intermittent video (but not audio usually). He plays very well for a few minutes, then I get massive frame drops and resumes after a few seconds. This problem can be seen with mpeg videos 4 code of SD resolution. Initially I suspected that my videos have been corrupt, but they are actually perfectly fine (even video will be stutter at various points. They are also very well on other machines). I tried at least 10 different videos, and the problem can be seen in each of them.

  I tried VLC, windows media, classic CCCP Media Player, player and they all have the same problem.

  When I look at the CPU usage history, there is no unusual spikes or falls in the use of the CPU for stuttering (constant at 20% or more).

  I had the same problem with the stock drivers. I installed the latest update of drivers and bios Lenovo site but same problem (I also tried the drivers far more directly from AMD, but uninstalled prompty them because they seem to break the brightness of the screen.) Unfortunately I forgot to try video playback).

  I tried to disable all the options from the Catalyst Control Panel, but no improvement in video post-processing.

  I'm sure this isn't malware or virus related - I have MS security essentials running home and I didn't download all applications other than steam, chrome and above media players.

  Flash (youtube, etc) and video Netflix seem unaffected.

  I suspected that maybe my HDD wakes up from his sleep after a few minutes of inactivity, but I doubt that's it. Power management settings are defined so that my hard drive goes to sleep after 15 minutes of inactivity, but the saccade occur more often than that. (Besides, I don't think that video playback counts as inactivity)

  Any who are having similar problems?

  Thank you.

  While I was watching the resource monitor during playback of movies, and there are spike use highly visible hard drive for stuttering. I tried to increase the size of buffer in VLC settings and that seems to help a lot.

  But I found a behavior more disturbing while experimentation. It seems that whenever there is any vibrations or movements, the drive slows down. This could be constantly observed by typing or moving the laptop while the benchmark of HARD drive is running. It is about half of what he would normally get.

  I don't know if this is a defect or some sort of safety mechanism, but I have half a mind to replace it with the SSD. Users of laptop lenovo saw something like that?

  EDIT: Well, too bad. I have discovered that now the Protection System Control Panel activates that allows me to set the sensitivity.

• Lenovo thinkpad x120e keyboard problems?

  My thinkpad x120e keyboard has problems. I noticed that my space bar does not work if I press the button on the outside edges. I was wondering if this is normal on the thinkpad x120e.

  you mean to remove and put in the keyboard?

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles_pdf/63y0640_02.PDF

• X120e Battery Charge problem

  Hello

  I bought my x120e about a month ago and it's been great since, but recently I had problems with the battery. When I charge the battery to 100% and then unplug the power adapter, the battery is fine for an hour or two, and load will decrease to a normal and regular rhythm (indicated by the percentage). However, when the battery is at 75-80%, then he jumps abruptly up to 10%, and I get a message that I have to charge the cell phone or turn it off. When I connect and start loading again, the battery charges at a normal speed of about 10 to 40%, but the same thing happens and it jumps up to 100%, saying it is fully charged. Generally, I would be happy with such a fast charge, but in this case the battery is not really full as soon, he dies suddenly after that I have unplug the adapter. Even if I let it continue loading at 100%, the same thing happens.

  So, I was wondering if I could do something to fix this on my own, or if I should send it just come back on the one year warranty. Please tell me if I did not know by describing the problem and thanks for any help/suggestions!

  I just wanted to post an update. I thought that my explanation of my problem of battery gave a negative perception of the ThinkPad x120e and lenovo in general, but I called the customer service of lenovo today and after 15 minutes, the representative has verified the problem (battery was indeed defective) and sent a new battery in my house. Overall, I am very satisfied, and I think that this problem of battery was only an isolated case. The battery is supposed to come in 2 days!

• Office X120e taskbar problem

  I don't know why but since I activated windows 7 ultimate, there have been strange shadows on the windows interface (task bar). Here are two photos: the first shows my destop with strange shadows x120e, the second is another of my pc Windows 7 who do not have the problem of the shadow. As you can see, the taskbar on the first image had these strange shadows, and I want to make these shadows disappear. All the appearance settings are the same for these two computers, but that w / the problem of shadow has windows 7 and the other without problem (second image) has windows 7 Edition home premium.

  first one (shadows-bad-my current x120e desktop):

  http://img857.imageshack.us/img857/2154/baddesktop.jpg

  second (what I want to look like one):

  http://img651.imageshack.us/img651/6469/desktopideal.PNG

  hope you guys can see the shadows the terrible bar windows tasks. Please tell me how to make shadows disappear. Thank you.

  The manual mode is probably easier:

  1. start > Regedit.exe
  2. navigate to:
  HKEY_CURRENT_USER
  3. double-click on ColorizationGlassReflectionIntensity
  4. change the value data to 0.
  5. click OK, close the registry editor
  6. start > run > net stop uxsms
  7. wait Aero turn off
  8. start > run > net start uxsms
  9 wait for Aero to turn back without reflections.

• X120e - Help! BIOS problems!

  Hi again,

  I'm getting some strange behaviour in the bios. One of them is that I can not activate the AMD V (TM) technology. I allow it, save the changes and reboot. The value is returned to the people with reduced mobility.

  Also, sometimes I lose some of the tabs in the bios, which is the Startup tab. I have to Load Setup Defaults to have that tab back, although I did not change in the bios.

  Another thing is that I can't get the boot of diagnosis. I always get the quick start (with the lenovo logo). Cannot enable the diagnostic startup.

  What is going on? Is the bios software buggy, or my Board is saying 'goodbye '?

  abvasili

  Hi abvasili,

  I've got your MP about your request for help for this problem of fixing on the center of services because of your first experience with them.

  Please give me the info I need in my MP replied you.

  Thank you very much!

  Kind regards
  Cleo

• Problem with microphone when using the speakerphone in 5.1.1

  During the call to anyone... When I press the speaker button to hear a louder voice microphone be cut always... even if I uncheck the speaker button!
  To speak normally without speaker... so, I have to end the call and start a second time to get the mic working!
  What is c?
  Please someone try and post it here...
  We need an update I think to fix this bug with mute mic!
  Please answer me.
  Thank you.

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• My iPhone is stuck in headset mode.  It's the THIRD phone that has had this problem.  Why Apple won't be a manual control of the headphone plug in the software?

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  doctortroyp wrote:

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  It is not common in the vast majority of users.

  If you wish to have a such feature manual control available, http://www.apple.com/feedback/ will be a good resource for this comments.

  Otherwise, try to restore your iPhone as new and not a backup test to see if the problem is back by restoring your backup on each of these phones.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• Lenovo X120e in trouble with the system update

  Hi, I am building a brand new X120e (0596) with an AMD E-350, 4 GB of RAM I have loaded with X 64 Win 7 Enterprise. Everything is fine, but whenever I try to run the Lenovo system update I get the message: "the server to update the system is currently unavailable. Please try again later. "Normally I just wait a day and try again, but I've waited three days and tried every day and still not the same error. Also I tried to download things like the Manager of power and integration of hotkey directly from Lenovo, and while they install although they do not work properly. The power manager does not detect the battery and the shortcut keys work only partially. Usually after I get 'not available' error I try to use the update of the system on a 301 x and a t41 I have and it works on both. Also I had similar trouble on an older 120 x I have rebuild after the user filled the HARD disk with spam and viruses, but I attributed the problem to the reconstruction. This is a brand new fresh out of the box of Lenovo machine. Any ideas?

  Final update; I'll just recreate the image with Win7 Pro. The features I wanted in Ent do not work in all cases and I have Lenovo Tech Support suggests the redefinition thus. So thank you for all your help in any case.

• helps recovery Bios X121e (x120e x130e)

  Hello world. After my x 220 thread was left unanswered, I hope I will have better luck with it.

  I need the procedure for recovery of bios for x121e (x120e, x130e).
  IM in brick, and no method found in guides for wincrisis do not work. I think that I can't enter the bios recovery mode no mather who combinatiom of the keys I use. Nothing happening just to the fan spins and the laptop does not read my USB (usb led flashes for less than a second and that's it.

  It would be very useful to anyone recovered x121e post here.

  It means anything, its with amd e450 apu and its Japanese version, which has the Japanese keyboard.

  Kind regards

  [Solved]

  The fixed!

  So for everyone with the same model and same problem: it turns out that this bios don't really boot block. If the bios failure = brick Clipboard without recovery options.

  But here's how I solved mine. Bought a SPI programmer, ic clip (soic8), some test wires and fact adapter to connect the programmer ind clip. Had some problems and also had to change downloaded bios because I didn't have the right backup but after little playing, he shot straight up. If you have good rom backed up, flashing should be easier. It is the solution for those who have more technical, but much easier than the chip soldering skills.

  [url =http://postimg.org/image/646cgp0kr/] [img] http://s25.postimg.org/646cgp0kr/IMG_20150220_215643.jpg [/ i... ]

  [url =http://postimg.org/image/5ov2noenf/] [img] http://s25.postimg.org/5ov2noenf/IMG_20150220_215632.jpg [/ i... ]

  [url =http://postimg.org/image/jjtd6592j/] [img] http://s25.postimg.org/jjtd6592j/IMG_20150221_022114.jpg [/ i... ]

• X120e-Thinkvantage Toolbox displays wrong product id

  Hi everyone, this is going to be a bit long, so thank you in advance for your patient. :-)

  The boot loop (explained in a previous post) my problem was solved by changing the motherboard. I'm happy to have my operational x120e.

  Now, I have a very annoying problem. After receiving the laptop, I immediately put to update the latest bios firmware.

  Later I discovered that after I installed the new mobo to the center support they did not update the type of product, a serial number of the machine in the BIOS. So the thinkvantage Toolbox displayed an incorrect product id: qqqq2ru. As you can imagine that the system cannot be automatically updated because there is no product with this identification number.

  After hours of searching on Google I found a copy of the disk of hardware maintenance (v1.78, please don't ask me how I did it) and I managed to update the BIOS with the right product and SN. I thought, oh, what a relief to e. This until the computer is restarted. The Toolbox now shows the correct SN but the same incorrect product id: qqqq2ru

  I thought that maybe I should reinstall the system to factory default. Done, but the result is the same. My product in the Toolbox TV id is on qqqq2RU, although in the bios, I see the correct model, in my case 05962RU.

  Can anyone shed light on what could be the problem?

  Any help will be much appreciated.

  Thanks in advance

  abvasili

  OK, I solved this.

  Aparently, the cause of the problem was Flash new bios without the first writing of the info in the BIOS (Serial Number, type of product, etc.)

  I have downgraded the bios with an old version and deleted the product type. Voila. ThinkVantage Toolbox recognized my product id, etc. of SN. After that, I updated the bios with the latest version and now everything is fine.

  Hope this will help someone with the same problem in the future.

  Thanks for reading.

  abvasili

• Can install ANY Linux on x120e

  Hello, I bought ThinkPad x120e, and my primary operating system is Linux. Now, I have used Linux for 10 years now, and I have not through such a problem until now, even if other people say that they installed Linux on the thing with success.
  I tried to boot ArchLinux from the flash drive USB, passes GRUB, but starts then stops at the message "kernel startup".

  I tried 15 Fedora and Ubuntu 11.10, the same thing. That once Ubuntu has successfully started (I don't know how it happened, by chance I guess), and it worked perfectly.

  I am very disappointed by this

  Any help appreciated, thanks.

  I found the problem. When I make a change in the BIOS and then select 'Save and Exit BIOS', the laptop will not start hard, but will be the attempt to load the operating system. In the case of Linux, the kernel will not start. When I turn off and turn on the laptop, Linux starts as usual. Is there anyone with x120e, who can confirm this? Is there any where that I can report this bug for Lenovo? Thank you.

• HELP-my x120e is stuck in a boot loop - without reach the bios logo

  Hello world

  I hope to explain clearly what is my (BIG) problem with my x120e.

  Yesterday, I noticed a strange behavior on my bios. I tried to make some changes for example. Switching fn with ctrl key, which allows the charger usb, or AMD - V technology. With f10, I saved and restarted the computer. CTRL-FN keys has not changed. I went into the bios and I saw that nothing has been recorded. I repeated the process, without success. Without stops could be made. As I turned off the computer.

  After a few minutes, I wanted to turn on the computer, but here's the big problem. The computer does not start. After pressing the power button / computer starts (I hear the fan noise and light on the green power button) but, after 6 seconds, without reach the bios logo, it restarts and it will indefinitely until I stopped him keep the power button.

  What I tried after searching the forums was:

  1. remove the battery, keeping the power for 60 years (and 30) button pressed seconds. Re-connect battery. NOTHING

  2. I removed the system memory, put back them. You try to start. NOTHING

  The netbook is 1 month old. It's very frustrating.

  Can someone help me with this? I live in Albania, no here Lenovo support center.

  Thanks to all those who can help you.

  abvasili

  
  

• Question of X120e ABGN driver in Windows 7 Pro x 64

  I recently bought a x120e and installed an SSD with my own copy of Windows 7 Professional 64-bit. I managed to install all the drivers, but my ABGN 2 x 2 wlan card driver refuses to install correctly. I get a code 10 this device cannot start the message and have tried reinstalling the drivers several times and also tried a new installation of Windows, by using my Win 7 Ultimate 64 DVD with the same result. I called Lenovo support and they remote in and tried as well and couldn't make it work. They sent me a replacement wlan 2 card x 2 and it does too much the drivers. Has anyone experience this problem?

  I will try to install a copy of Windows 7 32 then and see if it's a matter of 64-bit driver. If this does not resolve this, I guess my only option is to call the guy from on-site warranty and replace the motherboard. If anyone knows a fix or an another une autre source source for these broadcom drivers, let me know. Thank you

  
  

• X120e - HDMI + OSD

  Get a strange question. When my X120e is plugged into my HD via HDMI, at any time a sound is played (and therefore passed via HDMI), the volume of Lenovo OSD indicator will pop up. So, as you can imagine, it becomes quite boring. Everyone notice this problem?