Windows XP... blue screen.\i386\ntkrnlmp.exe... Code7... could not continue... What do I do

Similar Questions

• Windows 7 blue screen DRIVER_POWER_STATE_FAILURE ntoskrnl.exe

  Hi community

  I'm having a problem with my installation of Windows 7. When I try to shut down my pc, it still shows the blue screen with the message "DRIVER_POWER_STATE_FAILURE. I did research on the internet and discovered that this blue screen is above all connected to a driver problem. Then I updated some drivers at random, but it has not solved the problem for me. Could someone help me to analyze my Minidump file? I put it on OneDrive:

  https://onedrive.live.com/redir?RESID=A57FDA7761102DB1! 154 & authkey =! ALphxLeHKGmn8fM & ithint = the file % 2cdmp

  Thank you!

  A site shows the same stop error messageand it points to 5U877.sys camera Ricoh drivers, can cause this stop error

  This file is 5 years on your system. See if there is an update for it

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 blue screen... BCCode: a

  I was recently watching a movie on my laptop when suddenly "blue-screen" appeared with error codes. My laptop then restarted and it happened again. I then waited so he can restart once again, however, I started windows in safe mode and then rebooted the system, and it came perfectly. After you find the error Although the center of the action, I found this information.

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 2057

  Additional information about the problem
  BCCode: a
  BCP1: FFFFFA8015CAF010
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF80002B8BA57
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1
  Bucket ID: X64_0xA_nt! MiReleaseConfirmedPageFileSpace + 87
  Information about the server: 1d3b1813-1d92-44ea-8f24-3e4ca7b3dac8

  I would really appreciate any information on this subject and how to work around this problem in the future. Thank you for any feedback.

  Hello

  References to Vista also apply to Windows 7.

  Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates -
  updates to the pilot), or add key software lately? Drivers and antivirus/antispyware/security
  the products are also suspect likely. Next message is my generic driver updated methods to use when
  you get to this part of the resolution of the problems.

  BCCode: a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after installing a faulty device driver,
  BIOS or system service.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be
  caused by a device driver, system service, a virus scanner, or backup tool which is not compatible
  with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration .
  4. This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus
  Scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or
  2. the driver that caused the error.
  3. Try disabling the cache in memory of the BIOS.
  4. Run the diagnostics of material provided by the manufacturer of the system, in particular the memory
  5. scanner. For more information about these procedures, see the manual of your computer.
  6. Make sure that the latest Service Pack is installed.
  7. If your system has interface cards (SCSI) small computer system, contact the adapter
  8. manufacturer for updates of Windows drivers. Try to disable sync negotiation in the SCSI
  9. BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  10. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port.
  11. Also, check each IDE device to the right setting master/slave/stand alone. Try
  12. remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and all the
  devices are listed in the list of the products tested Microsoft Windows market.

  BCCode: a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that causes
  It crashing.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  This is my generic troubleshooting tool and can probably give a bit more specific when help
  you give the ICC codes.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

• Windows xp blue screen stop: 00000024

  Title: original windows xp blue screen

  had a blue screen with stop:

  Hi steveshepherd,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you insert the Windows XP CD?

  You can follow the steps provided by Karena R in the link below, which relate to this issue

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/blue-screen-stop-error-0x00000024-while-booting/196033b0-fbe9-45dd-abbf-889291d0d133

  Kind regards

  Ajay K

• Windows 7 blue screen problems

  Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
  so time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
  Details of all application crashes occurred in your system. The information of the plant are extracted
  the .wer files created by the Windows Error Reporting (WER) of exploitation component
  system each time that an accident has occurred. AppCrashView also allows you to easily record the
  list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• isqlplussvc.exe memory could not be read error

  I get an error "isqlplussvc.exe memory could not be read error" at windows xp startup which is very confusing!
  
  If I remove the file:
  C:\oracle\product\10.2.0\client_2
  
  The error disappears by all my holiday of ODBC connections.
  
  If I put the rear backrest, returns the error...
  
  Advice greatly appreciated!
  
  (And some explanations about why there is a client_1 folder as a folder client_2!)
  
  Thank you!!

  It is you need or use iSQLPlus? Or you simply annoyed by the message. You can disable the startup automatic iSQLPLUS during OS reboot in the Panel--> Services. If you need to use iSQLPlus then try to fix it. But iSQLplus must be running on your server not your customer.

  You had client2 and client1 is because you installed Oracle client twice at any given time. Check your connection ODBC see what ORACLE_HOME they use. If you only need one, uninstall one of the Oracle client.

• HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  all I need is someone find my phone on the Sony site and that will be a pretty

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=home&PRODTYPE=24

  go to this site and to detect my model (vaio only)

• Windows Live ID Sign in French Wizard error - "Windows Live ID Sign in Assistant (wlidsvc) Service could not be started. Make sure you have sufficient privileges to start system services. "

  I want to install the Windows Live Id sign in assistant.

  But when its almost done I get this message:

  "Windows Live ID Sign in Assistant (wlidsvc) service could not be started. Make sure you have sufficient privileges to start system services. "and the RETRY and CANCEL buttons.

  Can someone please tell me what to do.

  I appriciate it :)

  Hello

  For more specialist help on issue of Windows Live Sign-in Assistant, you can post your request here:

  Windows Live Forum - http://windowslivehelp.com/

• Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  Thoughts?

  Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  I've uninstalled Reader and reinstalled, but the problem remains.  I also tried to repair the installation and that doesn't work anymore.

  Thanks for the tip.  It turned out that kind Reader has been commissioning in protected mode.  I changed the setting and it prints now as before.

  Thank you

• \Lightroom_4_LS11_win_4_4.exe.part could not be saved because the source file could not be read.

  Update 4.1 to 4.4 Lightroom I get this message - LS11_win_4_4.exe.part could not be saved, because the source file could not be read.

  Hello

  Please uninstall Lightroom 4.1 and then download the latest version to install. It should work.

  Kind regards

  Abhijit

• Windows 8 Blue error screen dump ntkrnlmp.exe

  Hello.

  I get a blue screen error whenever I start up my laptop, and then it restarts automatically.

  This is the dump file.

  Any help would be greatly appreciated.

  Thank you.

  The dump file is as follows:

  Microsoft (R) Windows debug 6.2.9200.20512 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\MEMORY. DMP]
  The Bitmap core dump file: the single kernel address space is available

  Symbol search path is: srv * c:\cache* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff803'3361 b 000 PsLoadedModuleList = 0xfffff803'338e7aa0
  The debugging session: 08:37:08.266 Mar 5 August 2014 (UTC + 02:00)
  System Uptime: 0 days 7:44:31.323
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .....................
  Loading user symbols

  Loading unloaded module list
  .......................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 7 a, {fffff6fc400bb600, ffffffffc00000c0, 16cd4cbe0, fffff880176c0000}

  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 24e14)

  Follow-up: MachineOwner
  ---------

  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: fffff6fc400bb600, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc00000c0, error state (state code of e/s normally)
  Arg3: 000000016cd4cbe0, the current process (virtual address for the lock type 3 or PTE)
  Arg4: fffff880176c0000, virtual address that could not be paged in (or PTE contents if arg1 is a PTE address)

  Debugging information:
  ------------------

  Error_code: (NTSTATUS) 0xc00000c0 - El device exists.

  BUGCHECK_STR: 0x7a_c00000c0

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff803337301b6 to fffff80333675440

  STACK_TEXT:
  fffff880 '02d786e8 fffff803' 337301b 6: 0000007 a 00000000' fffff6fc '400bb600 ffffffff' c00000c0 00000001' 6cd4cbe0: nt! KeBugCheckEx
  "fffff880 '02d786f0 fffff803' 336f1bb7: 00000000'00000002 fffff880 ' 02 d 78850 fffff803" 3396ca 80 fffff880'02 d 78840: nt! : FNODOBFM: 'string' + 0x24e14
  fffff880 '02d787d0 fffff803' 336afdef: fffffa80'06fb0040 fffff803 '3396ca 80 00000000' c0033333 fffffa80' 06fb0140: nt! MiIssueHardFault + 0x1b7
  fffff880 '02d788a0 fffff803' 33650f22: 00000000 00000001' fffffa80 '07621b 00 00000000 00000000' fffffa80' 07621b 02: nt! MmAccessFault + 0x81f
  fffff880 '02d789e0 fffff803' 33655f4b: fffff803'338eed80 00000000'00000000 00000000'00000000 fffffa80'09181900: nt! MiInPageSingleKernelStack + 0x14e
  fffff880 '02d78bb0 fffff803' 33647ff5: fffffa80'06fb0040 00000000'00000000 00000000'00000000 00000000'00000000: nt! KeSwapProcessOrStack + 0xb3
  "fffff880'02d78c10 fffff803 336 CF 836: fffff803 ' 33913180 fffffa80 ' 06fb0040 fffff803 '3396 d 880 fffffa80' 070344 c 0: nt! PspSystemThreadStartup + 0 x 59
  fffff880'02d78c60 00000000' 00000000: fffff880 '02 d 79000 fffff880' 02 d 73000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! : FNODOBFM: 'string' + 24e14
  fffff803'337301 b 6 cc int 3

  SYMBOL_STACK_INDEX: 1

  SYMBOL_NAME: nt! : FNODOBFM: 'string' + 24e14

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 531d349d

  BUCKET_ID_FUNC_OFFSET: 24e14

  FAILURE_BUCKET_ID: 0x7a_c00000c0_nt! _ ?? _::FNODOBFM:_string_

  BUCKET_ID: 0x7a_c00000c0_nt! _ ?? _::FNODOBFM:_string_

  Follow-up: MachineOwner
  ---------

   We need the logfile itself (called DMP file) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  
  

  If you use the blue screen view, which has crashed, or a similar application, don't.  They are wrong at least as often they are correct

• Windows 7 blue screen - halmacpi.dll / ntkrnlpa.exe

  Hey guys!

  I had the famous Blue error screen in my office, I hope you can save me!

  Halmacpi.dll halmacpi.dll + efcd 0x8302d000 0 x 83064000 0 x 00037000 0x4ce788d2 2010-11-20 06:37:38 Microsoft® Windows® Operating System Hardware Abstraction Layer DLL 6.1.7601.17514 (win7sp1_rtm.101119 - 1850) Microsoft Corporation C:\Windows\system32\halmacpi.dll

  Ntkrnlpa.exe ntkrnlpa.exe + d166c 0x82c18000 0x8302d000 00415000 0x5315a008 03/04/2014 0 x 07:42:32 (win7sp1_ldr.140303 - 2307) Microsoft® Windows® NT Kernel operating system & 6.1.7601.22616 Microsoft Corporation C:\Windows\system32\ntkrnlpa.exe

  Files:

  https://onedrive.live.com/redir?RESID=40C4D78CE0F81FB9! 116 & authkey =! AGA__M5bCw31VYs & ithint = % 2cdmp

  They are called BCC124 and are related to the material.  Read how to diagnose and, hopefully, correct in this wiki