Windows XP DHCP problem when authentication network enabled

Similar Questions

• A problem when authentication via Radius ASA

  Hi all

  Please give me a helping hand. I have a problem when through ASA 5520 via Radius Authentication for ACS 4.0 via the VPN device. I need to configure secure authentication and NAC for remote user VPN. It simply does not work, but it works when you use Ganymede so all the connection seems to be ok as ACS succesfully authenticate a remote via MS AD VPN user when you use Ganymede. But I read that I can not use NAC when Ganymede using, I'm good? ASA and ACS journals indicate a problem with the shared key but I already double checked the key on both sides, the IP address is correct on SAA and I also tried all possible methods of RADIUS on SAA. Any idea where might be a problem?

  Hello

  When you use ACS 4.0, then make sure that the AAA Client for ASA entry you created on GBA, if under a NDG, then make sure that there is no key to the NDG level.

  Otherwise, pass entry client ASA as RADIUS ACS in NDG (Unassigned) on ACS.

  Kind regards

  Prem

• Windows XP Explorer crashes when searching network on another XP machine folder

  Hello

  I have rebuilt two of my machines, both running Windows XP. Until a few days ago, everything worked without problems. One of the portions of the machine as our network server domestic and something happened now in recent days that when I try and access network folders, explore my regular of the machine comes to a grinding hault for a long time and then seems to come right.
  Trying to copy large files or listening to music does not at all since the problem seems intermittent and very frustrating.
  The two machines are:
  -Windows XP Pro
  -On the same network.
  -Both know updates since the reconstructions.
  I'd appreciate some light shed on this if anyone knows an answer please?
  Thank you very much
  James

  Hi James,

  ·         Have you made changes on the computer?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to reset TCP/IP.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Method 4: Update the latest drivers for network.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Portege R400 screen problems when wireless is enabled

  Hello

  I'm a big fan of my R400, but he has a problem, I can't get rid of that.

  When I use it via evry 5 minutes wireless the done screen a total refresh of each window to reset the mouse in the middle of the screen. If I have a few windows open, it can take quitge seconds and almost never ends up on the window, that I am. Really annoying!

  Any ideas how I can stop what is happening?

  Concerning

  Alan

  In this case please proceed as follows:

  -Update your operating system (Windows update)
  -Update ALL your drivers (hardware drivers)
  -Update your installed applications

  Check if the problem persists, if yes, then does a full recovery of the system on your machine.

  Please give feedback on your success.

  Greetings

• can not sync music to any memory card in Windows Media Player due to the error Windows encountered a problem when synchronizing the file to the device.

  Original title: can not sync music to any Windows Media Player memory card

  This has not happened before, but now, whenever I want to sync music to any memory card, it does not work. It makes the whole process, and it did as it syncs, but at the end of that music just does not appear in the memory card. If I go to the status of the synchronization, all songs appear with a RED x next and it says that Windows has encountered a problem during the synchronization of the file to the device. How can I fix it? as I said before, this has not happened before.

  Hi UlloaC,

  See the steps mentioned in the link below that relates to a similar question

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D1236&ContextId=211&OriginalID=C00D1179

  See also the link below

  How can I fix sync errors?

• Windows Movie Maker problem - when I add a title to a clip and read the clip of the song jump in and out

  I try to add a title to a clip in my project.  When I discovered the clip after adding the title title jumps in & out.  I want the title to be visible at all times on the clip selected during playback of the clip.  I don't want the title to jump in & on

  Hi t3z,.

  Try the steps below to have the title of continuously visible:

  a. to ensure that you are with a view to the timeline, click the view menu and then click Calendar.

  b. Select the title you want to change the duration.

  (c) to extend the playing time of the title, drag the end trim handle toward the end of the timeline.

  You can check the links below: Add to the credits and titles of movie in Windows Movie Maker:http://windows.microsoft.com/en-US/windows-vista/Add-movie-titles-and-credits-in-Windows-Movie-Maker

  Get a movie in Windows Movie Maker:http://windows.microsoft.com/en-US/windows-vista/Edit-a-movie-in-Windows-Movie-Maker

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows encountered a problem when you try to copy a file___

  Ideas: suggestions; try to copy the files-error message, cannot copy on disk

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Help us help you:

  How to post in the Forums:

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question MS - MVP - Elephant Boy computers - Don ' t Panic!

• Windows Live mail problem when sending an email with picture multiple attachments (.jpg)

  Last week, I sent an email with attachments of two photo. This was not enough and I got 5 separate messages, advising me of non-delivery, but also the original message had not been saved in my "sent" folder

  Today, I sent two e-mails with multiple attachments photos and the recipient received the first email 46 times but with only the subject line, no message and no attachments. He received the second e-mail 26 times again with only the subject line (this one not included in my folder "sent" Although previous email did).

  The recipient today is different from the one I sent last week.

  All other messages recently, including those with no photographic attachments seem to have been given normally and are displayed in my "sent" folder Some recipients responded to these so I know they arrived OK.

  Any ideas on what is causing the problem and how to solve this problem?

  Right click on the name of the account above the Inbox. Properties | Advanced and uncheck 'Break apart messages... ". ». That will solve the multiple copies with no photo.

• Windows 10 - nested with Hyper-V network problem

  This occurs in all versions of Windows 10 as host including last leaks.

  Host: Windows 10 - vmware workstation. Role Hyper.V.

  No problem creating Hyper-V virtual machine in VMware Workstation.

  When you create a virtual network in Hyper-V (bridge), features network correctly, but when you restart the computer host, you lose connectivity to the network. Disabling the virtual card and returning it to allow, the network recovers.

  Apparently, it seems as if it was a mistake for windows 10. But when Windows 10 is installed on a real machine, there is a good network connectivity (included in the system restarts), so everything indicates to the virtual network interface which offers vmware.

  Kind regards

  DHCP and IP manual the problem happened.

  But... I have found the culprit.

  On the host computer:

  

  Disable the "Connectify" filter, the problem goes away.

  The funniest is that with this filter enabled, if the guest is windows 8, no problem. If the client is Windows 10, when problems occur.

  Kind regards

• Windows 8 problem with wireless network adapter

  I had a lot of trouble to stay connected to the internet with my college wireless network on

  my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:

  Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9

  Diagnostic information (wireless connectivity)

  Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra -91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s)

  Diagnostic information (wireless connectivity)

  Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem

  Diagnostic information (wireless network adapter)

  Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem

  Thanks for any help! It happened for about eight months and it's really frustrating.

  Hello

  Check with Dell and Broadcom, their documentation diagnostics online and drivers.
  and ask questions in the forums about known problems. The two Dell driver update, then
  Broadcom if there is more recent.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  Broadcom - downloads and Customer Support
  http://www.Broadcom.com/support/

  ==============================

  More troubleshooting:

  It is possible that the drivers you use, even if later now available, are not
  100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
  Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
  RealTek, Atheros and others may have newer versions is not available to the mother of system
  -site of the manufacturer on board. And continue to check in with them regularly over the next year.
  Also update the BIOS, drivers from the chipset of low level and major embedded and separate
  device drivers.

  Download your applications and devices in Windows 8.1
  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  =========================================================

  Don't forget to check the updates of the firmware on the router, because who can have a definite effect
  on connections Windows 8.1 same if other OS systems connections are fine.

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
  the manufacturer of real device driver updates. If there is no newer versions re - install the same
  ones. Ask known in their forums (if any) problems.

  ===================================

  General resolution: (after the above if necessary)

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8/8.1 - material
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8/8.1 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8/8.1 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8/8.1 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Network problems when mixed with computers based XP - Win 7 computer help?

  My network functions end when all computers are based on XP, but when a computer is Windows 7 wireless I discovered only two of three computers. There is no other variables.

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

  In order to establish the connection between the windows 7 machine and the Windows XP machine, try to download and install the patch Link-Layer Topology Discovery (LLTD). Click on the link below:

  Link Layer Topology Discovery (LLTD) responder (KB922120)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481e-BA11-37F485FA34EA&displaylang=en

  Method 2:

  Try the steps in the link below for the network of home computers running different versions of Windows

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Method 3:

  Ping the loopback address to verify that TCP/IP is installed and configured correctly on the local computer. To do this, type the following command:

  Ping 127.0.0.1

  If the loopback test fails, the IP stack is not responding. This problem may occur if one or more of the following conditions are true:

  ·         The TCP drivers are corrupted.

  ·         The network adapter does not work.

  ·         Another service is interfering with IP.

• I have problems when sending emails on Outlook Express (Windows XP Home) told in the Outbox, even if they were sent. What can I do?

  I have problems when sending emails on Outlook Express (Windows XP Home) told in the Outbox, even if they were sent.  What can I do?

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• Printing problems, when I go to search for a printer in windows, it says domain services active directory is not available

  My printer does not print. I rebooted the printer, but I still can't get it to work. When I go to search for a printer in windows, it tells the domain services active directory is not available.

  Hello

  1. is the computer connected to the domain?

  2 did you change on your computer?

  3. What is the brand and model of the printer number?

  4. is this a network or connected via USB printer

  Method 1:

  I suggest you follow the link and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  I also suggest you to follow the link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

• Drops of wireless network connection - windows Vista Restart problem

  Hello

  Recently installed Windows Vista on a new version of a recovered old PC as well as a few new purchases (memory, DVD player, NAS). Everything in place and works very well, but I'm faced with a problem of wireless network. The system works well: internet etc, but will drop the connection to the router wireless without apparent reason, he is followed by repeated reconnection automatic attempts when he will restore a decent connection for a minute or so and then drop again. This continues ad nauseam. The bulk of what a Windows restart will completely solve the problem for an hour or two until it is started.

  The research of the forums etc, I tried so far:
  -Switching of wireless channels
  -Deletion of "turbo" on the router
  -Disable IPv6
  -Checked drivers are updated
  -Check the firmware of the router

  I'm also reasonably sure of the following:
  -There is no interference (I put 'new' PC exactly in the same place as my old and uses exactly the same network card and router)
  -The work of the (PCI) wireless card (available connections always show the router as well as others in the region when connecting).
  -The router does not appear these problems with my PS3

  My details:
  -Windows Vista Home Premim - fully updated
  -Windows Firewall is the only firewall running
  Belkin router - G and complementary wireless card (a good old now a few years but run perfectly in XP)
  -P4HT 3 GHz, 2 GB system
  -Very little software installed to date (software the only thing I can think of Buffalo NAS relevent)

  Anyone with a similar experience? It's driving me crazy!

  See you soon!

  Hello DizzyEgg,

  Thank you for posting.  Transitional issues are most frustrating to resolve.  I think that this problem is with your wireless card.  If your PS3 and other devices are not the problems to give up the connection to your router this supports the hypothesis that the problem is in your wireless NIC.  We have seen that many times on this forum and I personally had the same problem with a wireless card.  The symptoms are identical, will connect for awhile, and then abandons the connection while still showing a strong wireless signal.  You can reconnect manually for a few minutes, and then the connection drops again.  Restart Windows seems to fix the problem than to have the connection after a variable duration.  Unfortunately, the only step in troubleshooting to verify this is to replace the wireless NIC card to test if the connection will be held with the new card.  Since you admit that the map is several years old that increases the likelihood of this being a transient failure on the NETWORK card wireless itself.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.