Windows XP logon screen does not appear

Similar Questions

• When I log into Windows, the login screen does not appear, how can I fix?

  I am running Windows XP Professional.  When I start my computer, it works fine.  I can log on and have no problem.  Unfortunately, when I log into my profile, Windows logon screen does not appear.  I use the log on screen where you have to manually type your user name and password.  The HP wallpaper happens, but the log in box does not work.  Better yet, it is not always the case.  I logged on and outside several times without any problems to come back later and find the log in box missing.  The only way I can solve the problem is to manually shut down the computer using the power button then restarting him.  I have no idea why this is happening or how I can fix this problem.  Any ideas?

  Hello

  I suggest you try the steps in the following Microsoft KB article and check if it helps.

  How to turn on automatic logon in Windows XP

  http://support.Microsoft.com/kb/315231

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• the resume session logon screen does not appear

  This happened after I installed windows essentials. Less, it's the only thing that has changed on my computer.

  Since then, my screensaver snaps but the logon screen does not light when I touch the mouse or keyboard. Everything is there for anyone to see.

  Help, please.

  I wonder if the screensaver is actually attractive.

  You use a screen saver image rather than a screen empty?  If this isn't the case, could you then temporarily for testing purposes.

  Go to control panel, Options power, active {power plan} change plan settings, turn off the screen and then set this for an hour or more, then you can be sure that it is not getting involved in this problem.

  Try this: -.

  1 if the screen saver is really attractive, but the connection does not work then it means that at least one aspect of the power options is not safeguarded by the system.  Are the other settings in power options, plan {power} active settings change, change of plan avancΘs, [you will have to click on "view the currently hidden settings] all be registered that you put them? Also, make sure that all these 3 parameters [above] still have their settings correctly.  You must be bored watching the. If the settings you equip & registered do not correctly appear in the advanced power management when you watch them again later to see this MS fix

  When you configure power options for the active power plan in Windows Vista or in Windows 7, the changes do not appear in the Power Options item in Control Panel

  2. If the screen saver is not actually engage then go on Panel configuration, device, Manager display - check for error messages then make a right click & Update drivers or go to the manufacturer of PC / display card manufacturer & install their last update.

  Beyond that, I can't think more away from the useful suggestions.  You've probably already tried SFC & found that he picked up nothing.

• Define a user account already but every time I start my computer the Welcome / logon screen does not appear.

  Original title: user account number.

  I've set up a user account already but every time I start my computer the home / log on screen does not appear

  Hi willy79,

  How many accounts do you have?

  You can check if the Welcome screen is enabled in your computer.

  For more information, refer to this link: to turn the Welcome screen on or off

  Hope the helps of information.
  Please post back and we do know.

• The keyboard on the Windows Media Center screen does not appear when I hit the enter keyboard key!

  I searched through the internet trying to find a solution to this annoying problem: after change to enter the registry and the application of the value entered for showOskOnKeyboardEnter under MCE. PerUserSettings, I always have problems serious on-screen keyboard to appear by using the key "Enter" on the keyboard.  I managed only a couple of times to get the OSK to appear among the dozens of attempts, however, I am unable to recreate the actions - is absolutely not stable.  The only area that reacts to the 'Enter' key is looking for music.  All the fields in the section of Netflix and movies search fields are unresponsive.  Not even works tap triple function.  The only compatible and possible way to have the OSK appear is to double click on the field - that does not work given that the goal is to have an IR remote with the Media Center application interface.  The button 'OK' on the remote control is mapped to the Enter key (except if WMC has a key code value for the 'OK' button).  Help, please!

  I had this problem and it was very frustrating.  The posted solution did not work for me initially.  What I've discovered, is that you have closed Media center before editing the registry.  If you change it while it is open it does not pick up the change and then save settings (i.e. with showOskOnKeyboardEnter = 0) when you close.

  Then...
  1 close Media Center.
  2. follow the steps of the posted solution: http://mymce.wordpress.com/2011/04/20/on-screen-keyboard-in-windows-media-center-doesn ' t - appear /
  3. Open Media Center.
  Should work now.

• Logon screen does not appear for public wifi

  I recently bought two Macs (Macbook Pro and Macbook Air).

  When I connect to wifi, which requires a logon, the Macbook Pro works fine. The Macbook Air does not work. It connects to the network, but when you open a browser, it says that you are not connected to internet (which is true, as did no logon).

  Forums offers various ways to approach this (try to force the login screen by entering the URL, look at the DNS settings, enter http://192.168.1.1 etc etc) but none of these work.

  I am lucky to have two Macs and I watched the network settings, Notification etc settings and they are (essentially) - things the same as the Mac address are obviously different.

  Two Macs are OS X El Captain (Version 10.11.4).

  Can anyone help as the Macbook Air is not very useful if I can't access public wifi?

  And if anyone has the definitive answer, I think it would help a lot of people.

  Thank you very much.

  How are you connected to the router? What's an auto assigned DNS or that you must do it manually.  If it's self assigned, remove the wifi settings in the preferences system, network. Network / airport / advanced, under the airport click Network in the box, then the negative pole. Then close and open the airport icon in the top menu. Make sure that the airport is on. Click on join the network, and then follow the instructions.  you will be asked for the name of the network and security. then your network password.  Do of course, don't forget that this network is enabled. You are basically removing the network in system preferences and starting over.

• When I shut down my computer and turn it back on, my logon screen does not appear.

  When I close my computer to move around the campus, he goes to hibernation, which I expect it to do. Unfortunately, when I opened this back to the top, most often (by that I mean always) the login screen refuses to appear. the only solution I've found yet is to shut down my computer, turn it on, and then go to the logiin screen. at this point he invites me to "Please wait", where, how it makes the little thing spinny points. It goes back to the beautiful image of a tower, and when I hit a button to return to the login screen, the "Please wait" is present. affter ten minutes of this unforgiving cycle, it ends by allows me to connect. but id prefer to not turn off my computer and then go directly to the login screen.

  im running windows 8

  Check connection options > to the 'start' screen type in "sign-in"options > select 'Sign-in option' > so 'password policy' says select "password is not necessary when waking up this PC to sleep" change "Password required when waking from sleep"

• HP Pavilion dv6-6150us. logon screen does not appear on the start upward.

  Hello

  The other day, I turned on my laptop and walked for 10-15 minutes. Then I went to find my cell phone had not started correctly and was rather come with a black screen displaying "check disk for errors. It could take more than an hour. "So I left it sitting there turned on and plugged in for about 5 hours, and the message remained on the screen. I tried to reinstall Windows 8 via disk and hard drive, and it could not be loaded. I also tried hard reset my laptop, whereby the same message appeared after I switched back on it. Could someone please help me with my laptop, fixing as I need to be fixed as soon as POSSIBLE?

  Thank you.

  Hi again Jarrod12345,

  You are welcome!

  If this answer solved your problem, can you please mark it as an accepted solution? This will help others with the same question to find the answer they're looking for.

  Have a great rest of your day!

• Logon screen does not appear on HDTV

  I can't start my desktop under Windows Vista Home Premium computer when it is hooked up to my new Vizio 19 inch HDTV.  It is connected to the TV with a VGA RGB cable port.  I see a few screens to come, then it goes dead to the point where I have to enter my password (the screen says something to the effect of no signal detected, ready to turn off, then the TV powers off.)

  I tried another cable with the same results.  Note, I can't connect my netbook (running Windows XP) to the TV and I get the appropriate login screen.

  Is this something special for Vista which would be fixed with an upgrade to Windows 7?  Or are there other patches available for this problem?

  Thank you very much in advance for any help you might be able to give!

  Mr. horse

  Hi Sir horse,

  1. are you able to see the HDTV screens after you connect to your laptop?

  2. don't you update the driver for the TV tuner card?

  You should not upgrade to windows 7 to get this issue resolved.  If it is a problem of signal I suggest you to update the drivers for the TV tuner card and check if it solves the problem.

  Before you can watch and record TV in Windows Media Center for the first time, you will need to physically connect a TV signal to the TV tuner on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/TV-on-your-computer-understanding-TV-signals-and-TV-tuners

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• the menu on the side of my screen does not appear

  I have a windows 8 on an HP laptop. For someone reason why, lately the menu on the side of my screen does not appear when I put my mouse near the right side of the screen. Also when I go to the left side of my screen, it should normally bring up my recent apps, I opened and an icon to go to the home screen, but its not do it either.

  Thank you, all I had to do was reboot m y laptop and it was fine.

• BlackBerry Q10 connection screen does not appear

  I have a Q10 and I can not log on screen to display.  When I click on the high background to unlock the screen, the screen came as usual, but in the upper part, the media volume is displayed. When I go to swipe to get the log to the screen the screen cleared all my alerts, but the login screen does not appear (although the display of the media volume is still there).  I plugged it in to see if that would do anything and now see a message that says "charging your battery more quickly, use the charger supplied with this device" but I was.  Any ideas?

  Good try to pull the battery to reset the phone.

• Cannot install flash player. After you download the Adobe FLash Player installer and running, a gray pop-up window opens but nothing does not appear in it. There is no progress bar or whatever it is.

  Cannot install flash player. After you download the Adobe FLash Player installer and running, a gray pop-up window opens but nothing does not appear in it. There is no progress bar or whatever it is, and even after keeping it running for a long time, there is no progress. Please help with this question.

  Hi Rlap,

  We are aware of this problem and are working on a fix.  In the meantime, please use the offline installation program, displayed at the bottom of the help page corresponding to your operating system and browser:

  • Installation problems | Flash Player | Windows
  • Installation problems | Flash Player | Mac

  Installers are at the bottom of the page, in the section "problems".

  --

  Maria

• With the help of Firefox 4.0 Beta 4. When I open a link in a new window, the web address does not appear in the address bar. Why?

  When I opened a web page link in "a new window" opens the link, but the information of the web page does not appear in the address bar. It is empty. If I open the link in a new tab, ho problem exists.

  In addition, if one open a link in the tab without a location in a new tab in the same window and then go to the original tab, the address bar fills up with the web address.

  Made it from several places, so it not dependent on location.

  That behavior is likely to be the top caused by an add-on, and in your case the probable guilty is IE Tab 2, the different versions of IE Tab caused problems with Firefox 4 beta, including issues with the location bar not updated.

  You can test to see if IE Tab 2 is causing your problem by disabling the it and then see if the address in a new window bar displays the address. If it isn't this add-on causing the problem, see Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems.

  FYI, the IE Tab Plus add-on has been updated recently to improve compatibility with Firefox 4 beta, you can try this one instead. The latest version is available from http://coralietab.mozdev.org/installation.html

• On the control screen does not appear when the Blur Blur option Gallery

  Running photoshop CC 2015.5

  iMac 27 inch end 2012 3.2 Ghz intel Core i5

  8 GB 1600 Mhz DDR3 memory

  NVIDiA GeForce GTX 675MX 1024 MB graphics card

  When I select filter > blur Gallery > and any option to blur the answer does not appear on Control Panel. . Instead, the screen is partially blurred and an arrow that turns into a cursor "Tack +" lights up the screen... It seems not to be a selection of tools which is the ellipse with find @ iris blur and I have no control over the features of blur, as noted in each training video that I can find on the subject...

  Please help if you can. ..

  Thank you!

  the on-screen controls may be hidden

  To display / hide: cmd + H

  Let us know if that helps.

• On the display screen does not appear

  I have Lenovo Z61t. One of the problems is if I adjust volume and brightness (decrease or increase) why the indicator does not appear in the monitor?

  Maybe I have uninstall a thinkpad software. Could you help me, if I need to re install the software to solve this problem, which?

  Even this not big problem, but do not uncomfortable, because I can't see the indicator on the screen.

  Thank you and best regards,

  Danuwinata

  Okay, now to solve, I download hotkey software, install, and fix the problem.