Windows XP: MEDIUM zoom?

Similar Questions

• Windows 7 Desktop zoom - how to zoom out

  original title: Zoom Windows 7 desktop.

  My office was a perfect size and I could see the entire screen on my internet with just the square and down the scroll bar and my home screen was fine and the icons were just right, so then I lent on my laptop on the key of keyboard and track and my screen zooms in. Now my icons on my desktop became important as well as all the writing. My internet is bigger and I now the up, down, left and right scrollbars. How can I change my size back to normal when the zoom level is 100%, but the writing is always visible and not stupidly small?

  Hold down the CTRL key while you use the wheel on your mouse to adjust the size of your desktop icons and or text.

• Why is happening: when I zoomed in a single window, all my other open windows are too zoomed!

  Simply, this has started to happen fairly recently and it's really annoying me, but I can't find a preference where I can turn off.

  If I'm working on an illustration and zoom in on a detail, I find that all the other open windows (in Photoshop CS2) have zoomed in with exactly the same amount of too, and I have to resize all. A lot of your time when I'm zapping between the open windows. What is a setting that I inadvertently clicked or a bug in the software?

  That much appreciated advice :-)

  Is"Zoom all windows" checked in the Options bar.

• Way to stop the window from resizing when the zoom?

  Hello.

  Is there a way to prevent resiging window when the zoom / out of my Photoshop documents?

  What seems to happen to me, like, hundreds of times a day is keeps resizing of the window when I Zoom in and out, and a large part of it goes behind all my palettes. So I drag the resizing handle to reduce the window only that she either resize again the next time I have to zoom in or out.

  I couldn't find a preference for it. When I used to work in Photoshop for WIndows I could have sworn that the window has never changed size unless I resized specifically it...

  Thank you!

  Preferences > General > Zoom Resizes Windows.

• Bootcamp/windows 10 Pro installation process fails

  Machine: MacBook Pro (retina, 150inch, Mid2015)

  El Capitan, 10.11.4

  Processor 2.8 GHz 16 GB Mem

  New MacBook with an instance of Time Machine saved from previous MacBook Pro

  Trying to install fresh Windows 10 Pro 64-bit image on a new 130GB partition created by Bootcamp.

  1. I ran bootcamp.
  2. Bootcamp Assistant downloads the drivers Windows and 'medium '.
  3. Bootcamp Assistant creates the disk partition, and then switches to Windows (no need USB), Windows.iso image is very good by Bootcamp.
  4. "Windows Setup" starts its thing.
  5. Screen 1: I am asked to confirm the installation, and accept the license.
  6. Screen 2: I enter my license key Pro 10 MS Windows in the form of xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
  7. Screen 3: not below, program installing Windows says "no images available.

  

  The Windows Installer will not leave here, and I interpret that as he cannot locate a disk image for installation of.

  I searched these forums a bit to find answers. I tried to copy the file Windows.iso on an external USB drive and that the selection as the source image and even the achievement of results as shown above.

  I looked at the menu "Actions" in the Bootcamp Assistant and that the only available element is 'Download Support Windows software' or something similar. I did and saved a folder on my Mac desktop, but it is nothing new.

  I have reset the PRAM with Cmnd-Option-P-R and the MSC with the Shift-command-Option-Power button. Once again nothing.

  Between each attempt, I'm in the Bootcamp Assistant and remove the Windows Partition of my drive.

  If anyone knows why the Windows Installer cannot find the ISO file or what steps I must take to install Windows Pro 10, I should be grateful if you would hear about it.

  Thank you.

  Followed, after contact Apple support, by sending in diagnosis and return just GENERALS of Apple engineers... I did a thorough cleaning of my PowerBook. Using the command-R during restart, started in Recovery Mode or what it's called, used the disk utility, wiped and formatted the drive. Made a new fresh install of OS X el Capitan. Updated. THEN, I installed Windows with BootCamp Assistant. The process worked. My hunch is that use Time Machine to power my new machine was the culprit. I am betting that Time Machine copied on the parameters of my previous machine (a mid-2011 Powerbook), on this new Powerbook from 2015. That's the only difference. So it is now resolved.

• How to stop the maps zoom before or back on the paging upwards or downwards?

  On Macbooks, the trackpad causes some windows of page zoom (slide up) or zoom out (by dragging down). Usually, this happens with windows that show cards, but other windows, too. This doesn't cause me any irritation, the end since it happens several times a day. I drag it to the bottom of a web page, completely unsuspecting and, in doing so, I slip on a window which completely zoomed out, making it impossible to see what was there. In the case of a map window, this moves the center point of the map to a preset, far from where it starts. To adjust the new focus TI where I needed.

  There is no need to have this function trackpad, since almost all the cards on the web comes with a built in zoom sufficient control. So I would like to disable this feature special trackpad. But I have not found a way to do this.

  Anyone know how? (Assuming that it is possible to turn it off.) Otherwise, I think that Apple should reprogram its trackpad. I don't want to zoom function included.)

  You should be able to disable this feature in the preferences system paved. Should be a checkbox under two fingers to zoom in the screen.

• Paged zoomed in cannot get to zoom out

  I was in my email account when my screen zooms in.  I held down the left CTRL key I think but do not know what other key I touch me.  It was a few key

  at the bottom right of the keyboard.  Help, please.

  Blessings,

  Patrick S. Patton

  E-mail address is removed from the privacy *.

  ... I held down the left CTRL key I think but do not know what other key I touch me...

  The keys that are quite standard through many Windows applications for zoom level are the Ctrl key with the more (e.g. +) or less (for example-) or scroll wheel on the mouse. More and less keys can be used either top right classic keys (for example the left Backspace) or from the numeric keypad (with NumLock on). When you use Ctrl +, the mouse cursor must be above the window to be zoomed in.

• HP Envy 17, Win 7 64 bit - how to re - install windows when the old hard drive failed?

  The laptop won't boot and drive fails Diagnostics to market. Restore does not work and take the hard drive on the laptop & connection on my desktop I can not access the recovery partition. The laptop is out of warranty.

  I have a replacement drive, but as I have no install disc and cannot access the recovery partition how can I reinstall the Windows OEM 7 new hard disk?

  Any help would be appreciated.

  If the full 25-character windows activation key is visible on the Microsoft Windows COA on your laptop, you can download an identical iso file from here and install Windows.

  Download the drivers from the HP support for your laptop computer portal. Put them on a flashdisk usb (USB key) for ease of installation.

  Use the Microsoft Windows 7 USD\DVD download tool and a 4 GB usb (thumbdrive) flashdisk for the fastest and most reliable Windows installation medium.

  The value in this way you can have your laptop in a usable state while you wait for your ordered recovery disk.

  Best regards
  ERICO

• the zoom percentage icon went

  How do the bar at the bottom of an IE window with the zoom percentage area?

  Right-click at the top of an IE Windows (near the minimize, maximize and close (red X) symbol), then click on "status bar".

• Overview of the zooms in instead zoom out

  Hello

  I tried to fix this by Googling it somehow I can think of Googling, but I can't seem to find a solution for this. I just got a Phantom 3 professional who shoots 4 k, and when I drag the clip in the timeline he does not ask if she needs to use the same settings for the sequence more, but even when it the problem was still there.

  I'll drag the clip and whenever I am 25% and upward in the preview window as it zoomed in. 25 isn't so bad, but 50% are entirely rather than zoom zoom. 10% makes that he extremely zoomed out also. It just feels really backward. I read somewhere that I probably erroneous sequence settings and so it would seem. In the "Videos" section on "Sequence settings" he says 1920 by 1080, but I can't change that. I can click on it and enter 3840 but the second I tab or click to change the height, that dates back to 1920.

  What I am doing wrong?

  Work on a very small screen?

  What are the dimensions in pixels of your screen?

  MtD

• Fit In Window has stopped working

  I use Illustrator CC on a Mac with El Capitan. Suddenly, this:

  Command + 0 is level zoom 200%, which makes it larger than the visible area. Even with display > adjust the artboard in the window.

  View > Fit all in window zoom level 100% fact.

  Dragging a selection rectangle comfortably around (or just inside) my work plan - instead of editing my selection in the window - made level zoom 200%. Smaller portions Marqueeing, however, behaves as expected.

  Selection of 150% (or typing in the middle) the zoom menu downstairs done level zoom 200%.

  Help, please.

  While seeking solutions to the "Illustrator CC + El Capitan perpetual = Spinning Beachball of death nightmare", I discovered that the deselection of window > Framework Application prevents the constant SBBoD and restores my privileges made to showcase!

• Are the key shortcut supposed to zoom to work differently on mac and pc?

  Hello, I use a mac at work and mouse control + SPACEBAR zoom functions as I do in Photoshop and Illustrator

  which means that if I hold down the command + SPACEBAR and click and drag the mouse left/down he's going to zoom out with fluidity (in function of time how I drag the mouse) or alternatively if I click on dragging the right mouse / upstairs he zoomed in.

  This works also perfect fo me I Zoom in and out a lot and combined with the space bar for the hand tool, I find that it is usually the fastest way to get to where I need to be on the artboard.

  Recently, I installed the applications at home on my PC and find the zoom works differently, and I often need many more orders key/mouse to do the same thing.

  In photoshop if I hold alt + space + mouse drag so he's going to draw a rectangle around and zoom in it.
  If I hold the ALT + space + mouse it click zoom out one step, or ctrl + space + mouse on it zooms in one step.

  In illustrator so I hold CTRL + Space + mouse do zooms in the box of

  CTRL + Space + mouse click will zoom in and ctrl + alt + space + mouse click will zoom out.

  
  It seems crazy in the PC I need to hit twice as many keys or to make additional orders to arrive there where versions would be in a single action on the mac.
  Programs are designed to work that way on the PC or is it something to do with my setup? Is there a setting somewhere in the preferences that need me to put in more dynamic market zoom in/out functions?

  It should work on mac and pc.

  Your version of windows, select the Zoom tool and make sure Zoom Scrubby is checked in the options toolbar.

  If your not able to check it out, make sure that use graphics processor is verified in Edit > Preferences > Performance.

  

• MapViewer in OBIEE - infowindow not coming not for all zoom levels

  Hello

  We have our BI data-bound Navteq sample data world. We used the theme of the M_COUNTRIES, created a map background and a Tiler with this theme and finally linked with the size of the country in OBIEE.

  Now, there is a problem - the small balloon as information window, which comes while we do a mouseover on the points of the map does not appear to lower levels of zoom. But it appears only after a zoom level 5-6.

  I tried with changing the size of the scale base map, created re the tile in the size of the scale of the map of base etc, but it did not help. Any suggestion please?

  In addition, the report card does not work in ipad, it isn't a zoom in the ipad and therefore the window information not listed do not at all. So I guess that somehow if we can bring the window information from zoom levels, it will be solved. I see the Server BI Mobile demo has a similar report, but don't know how it's done.

  Anyone who has worked in the same region and faces a similar issue? or I'm missing something.

  Kind regards

  Krish

  Resolved, to reduce the number of functions below 2000 (by default upper limit, in mapviewer)

• Same zoom level for all documents in mosaic

  So I looked the easiest way to switch between several documents in Photoshop, never knowing that he was right under my nose:

  Windows/organize/tiles

  .. I can't believe the answer was here all this time lol.

  The only problem with that is that when your documents are all tiled, some are zoomed closer than others - some documents it is difficult to distinguish. Is it possible to have all docs out tiled so that they "coincide the tile", that's why showing us the entire document in its mosaic? (Like "View / Fit on the screen ')... If there is no way to do it maybe there is a way via script?

  I searched for a way to set the zoom level for all open documents at the same level (put them all to 50% for example). This could at least be a start and then I'm sure I could implement. Haven't found anything useful at the moment...

  Which version of photoshop and the operating system are you using?

  If you set one of the tile documents together to desired zoom level and then go to window > Arrange > Match Zoom, made

  It works?

• How to access the loupe/marquee zoom tool in reader XI?

  The subject says it all, really.

  Richard

  The keyboard shortcut is the same as in most of the applications (Windows):

  CTRL + [zoom]

  CTRL - [zoom out]

  use the + /-on the numpad.

  If you do not have the Zoom tool in your toolbar, you can add it using view | Show/hide | Toolbar items | Select Zoom &.