Windows XP; No noise, Code 10, need to HELP Audio!

I have a Gateway laptop with windows XP. I deleted a non-Windows program, and it took my sound with it. After looking at all & put thru to update all the drivers, I found in 'Advanced Volume Audio Controls' I "No. Device" in reading or recording. Now, he tells me he needs a "table of mixer with volume control. There are a lot of mixers of music out there, but one that is good. I also had this code 10. Also need Audio driver "ATI SB400 PCI AC 97" Microsoft approved.  Any help is more than good! Thank you, Stephen B

Advertisement

Hello

You can follow the steps from the link: errors Code 10 Description that generates the Device Manager in Windows computers: http://support.microsoft.com/kb/943104

You can also run the troubleshooting utility from the link: no sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

Here is the link to the manufacturer's website: http://www.realtek.com/downloads/

Tags: Windows

Similar Questions

  • Opening of unreadable code files need urgent help please

    When I got my new laptop Toshiba as a gift in 2007 Microsoft Office Word and Excel etc were already set up so I don't have disks or keycodes. . An old person, it is also possible that my son who gifted it me may have installed above records to settle, but he has no recollection of this, except that he gave me the Toshiba Recovery Disc I have.

    My laptop had to go back to Toshiba for a long time for a manufacturing - related issue. They also informed me that some of my files were corrupt. All the features have remained on my computer as before repair, so nothing has been lost or had to be re-load.

    I found that since then all my docs are open in code form and are unreadable. Microsoft Word seems to have disappeared and I had to install an old Microsoft Works 2001 drive in order to work on new material. Microsoft Onenote was the disk, but not the word, if the docs will not open with Onenote, so I'm stuck.

    Is it possible for me to know if Toshiba can contain my original Microsoft Office key code and I was able to download again. ? I can't afford to buy a completely new desktop system and I have no way of knowing which Microsoft Office (2007)? creating documents. I have to know if there is any way I can read these documents and to establish which of the two may be corrupted so that I can remove them. A system restore would make readable documents? I'm not very technical minded with regard to computers that you can observe my text and will appreciate any help you can give I can't afford to pay someone who keeps my computer for a day or more and then charge me an exorbitant amount.
    Thank you very much in advance if you can help me in any way with easy to follow instructions or advice.

    What is the model number of your laptop?

    A trial version of MS Office may have been pre-installed. If you have activated Office (purchased a license), then you could try to call Microsoft to reactivate.

    If you reinstall Windows using your Toshiba recovery disc, the installation of Office must be installed. (Note that the restore disk will delete your data, back up your files first).

    Alternatively, you can use OpenOffice to read your documents. OpenOffice (free) works with Microsoft Office files.

  • Windows 7 Media Center Security Upgrade need to download audio books from Overdrive

    Build of Windows 7 Media Center 12 blocked all my old music files, and I can't download audio books from Overdrive. In the Media Center, I have a pop-up with a link towards an upgrade of security about protected files, but when I have a link to this page, the upgrade button is gray.  Microsoft says it's a prob of OEM and contact the manufacturer. EMachines says that it's probably my Norton blocks.  He tried to disable the firewall and Norton and still could not get the update for the Media Center.  What gives?

    Hi pamelals2u,

    I suggest you follow the steps provided by Naman R in this link: http://answers.microsoft.com/en-us/windows/forum/windows_7-sound/upgrade-button-is-greyed-out/5a4ac404-ed00-4a4e-920b-91e5e5decb5b

    I hope this helps.

  • Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help

    Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help

    Hello

    If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

    There is nothing to worry.

    Using both programs at the same time can cause system conflicts, etc.

    If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

    "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

    Right click and select Properties , ensure that Startup Type is automatic.

    Once modified, click apply and OK.

    Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

    .

    If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And for now, change startup Vista programs without using Defender, use one of these methods:

    "How to use MSCONFIG in Windows Vista"

    http://netsquirrel.com/Msconfig/msconfig_vista.html

    Or the program Autoruns for FREE:

    "V11.21 Autoruns for Windows"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    See you soon.

  • Try to install Windows vista Service pack 1 (K936330), need 25 character codes

    Try to install Windows vista Service pack 1 (K936330), need 25 character code.

    You don't need the code to install a Service Pack - what's your real problem?

    Your system shows a non-genuine notice?

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
    Once saved, run the tool.
    Click on the button continue, which will produce the report.
    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
    -* in your own thread *, please

    Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
     http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  • Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

    Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

    Hello

    I have a Compaq Mini - about 3 years - and the noise disappeared today.  The sound icon in the lower right corner of the screen disappeared.

    In the device, other devices Manager screen is color yellow as is the Audio on Bus High Definition Audio device.

    XP sounds and Audio devices Volume Control Panel tab no. Audio Device.

    I think that the driver may be missing?  I don't have the start up CD and don't know where or how, download the drivers of its replacement.

    Any help is appreciated to get my sound back!

    Hello:

    This is the page for support and drivers for your laptop.

    You can try reinstalling the audio driver XP from there.

    http://h10025.www1.HP.com/ewfrf/wc/product?product=4105117&cc=us&DLC=en&LC=en&query=CQ%2010%20101SA%20&tool=

  • Windows 7 - new update - Code 646 - that occur repeatedly for about a month now

    Hi all!

    I use Windows 7 Professional 64-bit. For the last month, my automatic updates continually seem to fail with an error Code 646. My only option so far has been to manually download the updates myself.

    Just curious to know if anyone knows if there is some kind of problem that MS is currently studying, or if there is a fix out there somewhere that I forgot. Let me know if any information is needed to help solve this problem and I'll give you a pleasure all necessary information!

    Thank you!!

    Smaktard wrote: Update on what I look at in the 'Review Your Update History' section to check the duration of that happening. 03/11/2009 (too far this screen goes), the update "Security Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430).

    See the «how to get help...» "and"Known issues"sections of http://support.microsoft.com/kb/954430 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Impossible to update windows xp, 0x80440A error code

    I could not update windows xp, 0x80440A error code

    0 x 80240036 and 0x8024400A

    You must be at Service Pack 3 level before you can use Windows updates.

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
    (for single PCs too)

    For Windows XP Service Pack 2 installation procedure
    http://support.Microsoft.com/kb/875364

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

  • My windows XP startup noise is not, how to fix this?

    Years back when we first of all our Office Windows XP Home Edition, I played around with the sounds and played with the settings for the sounds (such as the windows startup sound and windows closed down noise), and now I really regret. I don't remember what I did, but I did weird things complicated, and now whenever I connect to my account, I do not start noise. :( I HAVE TRIED to return to the menu control panel, sounds and audio devices and tried to change it on the Windows default setting, but IT won't WORK! I tried like 1000 times, but it still does not go nostalgic return to windows startup settings. Is it possible, maybe something to do with the registry (I think I accidentally played a bit with it) to restore my settings so that I can hear the sound of starting windows again? I will always be grateful to anyone who can help me.

    I think that your user profile account is maybe damaged. See if you create a new user if the default sounds work for this user.

    If Yes, then you will need to copy the information from your profile to the new account.

    Look at the following article to help copy profile.

    Article ID: 811151 - how to copy data from a corrupted to a new profile in Windows XP user profile
    http://support.Microsoft.com/kb/81151
     
    I hope this helps.

    Marilyn

  • I have no product key for my windows vista... I need help... pleaze!


    I have no product key for my windows vista... I need help... pleaze!

    If Windows Vista is already installed on your system and your system still works (even if only in safe mode) so you can be lucky.  There is a product called Belarc Advisor: http://www.belarc.com/free_download.html which can be installed on your system and can retrieve the product key in the system files (only Vista does not provide this feature).

    If you can not enter your system, it has already been formatted or something like that, there is very little that can be done.  There is no place that keeps a record of the product keys related to individuals (or computers) that can be checked and Microsoft will not give without proof of purchase product keys (which IS the key product - the sales receipt or even the disc itself is not enough).  You can't even borrow a disk from someone else because you need your product key to activate the program.  The only choice is to buy another product (you'll probably need a commercial full version as an upgrade will not work on a non-production system or one where you cannot install a product allowing to level).

    You can TRY to get Microsoft to activate your system without a product key if you have the disk (there are codes on the disc, which mean it is valid or not), but I doubt it will work but may be worth a try.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain that you have lost your product key, but the disc and it's the same PC.  They can give you a code to enter on this screen to activate Vista (or they have very probably you will say you are out of luck and they can not help you).

    I hope this helps.

    Good luck! Lorien - MCSA/MCSE/network + / A +.

  • Windows Activation error: Error Code 0 x 080070005

    I'm not sure what I did, but after I added a hard drive 3 TB to my turn, Windows has been telling me that it must be enabled, and every time I try to activate it online, I get the error message saying "a problem occurred when Windows tried to activate. Error code 0x80070005. "When I click on more options, he said: I need"higher authority"(I am the administrator and have administrator privileges) to activate it, but I don't know what this means, or even if there is something higher than the administrator. I'm sure that there is not, but I could be wrong.  I ran the MGAD tool, and that's what it came with:

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0
    Code of Validation caching online: 0x0
    Windows product key: *-* - FQ4RC - D8J8F-8PMY4
    The Windows Product Key hash: xZs5oWmf/L8h3bJIUNPlkcCJBA8 =
    Windows product ID: 00359-OEM-8703737-45825
    Windows Product ID Type: 3
    Windows license Type: OEM System Builder
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {E53A065F-EB4C-405A-8CC4-311009AAEA62} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.110622 - 1506
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {E53A065F-EB4C-405A-8CC4-311009AAEA62}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-8PMY400359-OEM-8703737-458253S-1-5-21-2558717277-3355826656-150721232Gigabyte Technology Co., Ltd.. GA-970-a-UD3 Award Software International, Inc.. F4 20111013000000.000000 + 0004E533907018400FA04090409Time(GMT-05:00) Standard is03109

    Content Spsys.log: 0 x 80070002

    License data-->
    C:\Windows\system32\slmgr.vbs(1333, 5) Microsoft VBScript runtime error: permission denied

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0x00000000
    Beyond: 0 x 0000000000000000
    Event timestamp: 12:7:2011 22:54
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID of Hash: MAAAAAEABAABAAEAAAABAAAAAQABAAEA6GFSisZs3N/cFRAzVPL2kVxvzppcpo4u

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID consistent: n/a
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC GBT GBTUACPI
    FACP GBT GBTUACPI
    HPET GBT GBTUACPI
    MCFG GBT GBTUACPI
    SSDT PTLTD POWERNOW
    MSDM GBT GBTUACPI
    CARPET GBT
    TAMG GBT GBT B0
    CARPET GBT

    The only thing I have changed in the last month is that I am a new processor and motherboard, and it worked well upward until a few nights ago.  Come to think of it, it didn't happen until the new year.  I added the hard drive Saturday night and did not get the error message until I logged on my computer the next day morning.  Could there be something wrong with the timestamp or something? That would cause a problem like this?

    Change the motherboard invalidates an OEM system builder license.

    The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    OEM licenses must be installed by professional system manufacturers. Under Microsoft's OEM license agreement, they should not be sold to end-users under any circumstances, must be preinstalled on a computer using the preinstallation OEM (OPK) before delivery to the customer and include to the at least the manufacturer contact information. They are, therefore, designed for installation only on a single computer and are not transferable, even if the original computer is no longer in use. This isn't usually a problem for users who buy a new computer, because systems that most pre-assembled systems ship with a preinstalled operating system. There are very few circumstances where Microsoft will allow the transfer of licensed OEM for a non-functional system to another, but the OEM System Builder License Agreement (SBLA), as well as the EULA (EULA) OEM contract don't contain any provision for this, it is entirely at the discretion of Microsoft, depending on the situation

    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_for_hobbyists.aspx

    --------------
    You can try the following:

    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: sfc/scannow

    This will check for any breach of integrity

    Restart your system

    then:
    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    There is no guarantee, it will be reactivated because its OEM license.

  • had to reinstall windows for the 7th time, windows shows now my code is invalid

    had to reinstall windows for the 7th time, windows shows now my code is invalid

    Windows 7 supports the reactivation by Internet up to 5 times after reinstalling, but you will need to use the phone activation after that:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • I have a challenge Code and need a Code of taking in charge to reload my Illustrator CS5 after my system crashed?

    I have a challenge Code and need a Code of taking in charge to reload my Illustrator CS5 after my system crashed? Windows 8

    Lost information - response #1 in https://forums.adobe.com/thread/2008767

  • I have Windows 7. Why would I need Hello? I can it safely remove?

    I have Windows 7. Why would I need Hello? I can it safely remove?

    It is a network protocol that uses iCloud, and it's tiny. Leave it alone.

  • HP Pavilion g6: need code bios crack please help

    I need help to get back into my phone, I forgot my password and it gives me a code 75615246 need help please

    Hello

    What is your machine? Why you need break? Please try:

    60773888

    Kind regards.

Maybe you are looking for

  • 5530th desire fails to copy on it 1 "page

    I have a new HP Pavilion laptop, running Windows 8.1. I'm connected wireless to the Envy 5530e-all-in-one. I printed a document using Microsoft Word 2013 successfully. Today, I put a page on the printer and asked a "copy."  When the page came off the

  • Question about the charging light on the venue Pro 11 (5130)

    I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and p

  • (Portable) Windows stops when I unplug - but can run on battery

    Hi, when I use my computer laptop plulgged in and unplug the camera to use it somewhere else, it often (but not always) stops.  When I reboot, the icon shows enough power in the battery, and I can use it disconnected for a long period of time.  He al

  • Surface - interface of Blackberry problems

    I installed the Blackberry Desktop Manager on my surface, but can not get the connection with my phone goes. No connection can be established, niehter USB or Bluetooth.  When I try to add the phone as a bluetooth, surface device sees the phone, but f

  • How can I contact an Adobe representative?

    Need help? the phone numbers of Adobe?