Windows XP NOT reinstall USB controllers after restart

Similar Questions

• Windows XP NOT automatically reinstall USB controllers after restart.

  I am running windows XP. My computer stopped grateful plug-and-play hardware connected via USB and asked drivers to be installed. I tried with the software that came with them (a mouse and a keyboard, and a flash player), but it does not work either.

  So, following the instructions of a forum, I uninstalled the USB controllers. After restarting the computer, the controllers were not resettled and windows keeps looking, without success, drivers for the "new hardware", or controllers that it has detected.

  Thank you in advance for any help offered!

  You have posted a question of Windows XP to a group of Vista?

  USB support / drivers are installed with your hardware chipset driver, although maybe an internal cable made lose (assuming that you have a desktop computer)

• Windows 7 not recognized as true after reinstalling on one machine virtual Parallels Desktop

  Hi all -

  I'm a Mac user running Windows 7 on my virtual machine (Parallels Desktop).  I did for years, even the upgrade to Windows 7 after using XP for a long time.
  Recently, I had a problem with the upgrade of Parallels Desktop, which could only be repaired by removing and then reinstalling the Virtual Machine Parallels.  This, of course, obliged me to reinstall all programs (including Windows 7).  Since I bought my Windows 7 and Office 2010 at Staples (Yes... not online or eBay copy here), I know that my copies are authentic and I used Winows 7 for the years leading up to this relocation.  I still have the original case, the disks and the sticker with the product key.  I used this key when I did the re-install and everything worked perfectly... until today when I turned on the virtual machine and he asked for me to enter the product key, say something (I'm sorry I didn't write that down) on the exhale.  I got my key, Windows 7 came out, but it is said that "this copy of Windows is not genuine" I get message "you can be a victim of software counterfeiting".  Once again... I bought full fare at Staples, so I do not know is not the case.
  Any suggestions?
  Thanks in advance for your help.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• OfficeJet 7410xi: computer does not have USB printer after upgrade to window 10

  The computer does not find the USB connected printer (Officejet 7410xi) after having modernized the window system 10.

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  During SOUTH clck the link (4th one) software selection step and uncheck the Bing toolbar due to incompatibility issues with MS Edge, then continue with the installation of you

  Please let me know the results,

  Shlomi

• Photosmart D110: D110 fails to install on Windows 7 - not found USB harware

  Hi all

  I'll put up a new Dell Inspiron 5000 running Windows 7 SP1 and wanted to add a photosmart D110.

  I downloaded the full software package of HP, but after the installation starts, I get a message that I have not available a USB device on my computer. It's probably a detection problem since I was on two of the three USB ports without problems.

  Now, the printer should be used on the network, so the fact that the Setup program does not detect a USB device should not interfere with the installation.

  I'm stuck and would like to know what are my options, if any. Is there a way to force the installer to not seek the USB hardware, or to ignore the error if it is not found?

  Any help is appreciated!

  Thank you

  Hello

  Open the start menu and type folder in the search bar, open it showed "Temp folder.

  Open the last HP installation folder that begins with 7z (for example 7zs1234)

  Open the installation folder.

  You can search usbready.exe and rename the file in usbready.old.exe.

  Return to the main installation folder (for example 7zs1234) and double-click Setup.exe, now follow the installation and check for the difference.

  Shlomi

• Windows will not ask for password after disconnection and stop

  machine is aspire R13, WIN 10

  I set up a password for OS - on the machine, do not use a windows account. After the outside panel and closure, opening the lid takes me straight on the desktop without having to ask for a password. What is a password, if anyone can open the lid and have access to everything?

  If instead of disconnecting and leaving the computer to sleep, so he asked a password to wake up - as if an unknown person will have access to the computer to wake up from sleep. How stupid!

  Is that the reason for this is that microsoft is forcing me to use a MS account for the connection in order to use my machine?

  From another forum, the solution was simple: change the password. Now, he asks a password after disconnection.

• Intel GMA > graphics properties > not applying color correction NOT the settings automatically after restarting PC

  Hello

  I just bought a Dell Netbook for my wife and after the opening of the Intel Graphics media accelerator control panel (driver for mobile 945 express chipset family), I tweaked the color correction to eliminate the bluish by default, BUT each time that I re boot the PC, these parameters are not re applied and I got to go again the same control panel and re still apply them (they show very well on the Panel configuration GUI just as I twisted them before the process of re - start, but they have simply not applied when the re PC starts).

  Thank you all in advance for your suggestions ;-)

  Enrique Diazruanova

  Hi Diazruanova,

  You recently did a software or a hardware change?
  You have to use this option with success on your new computer?
   
  Sounds like a driver issue, I recommend you update readers of the adapter to the display of the manufacturer's Web site.
  Here is the link for the center of ddownload from intel, enter model number and search for drivers according to the 32-bit version or 64-bit Windows 7.
  http://Downloadcenter.Intel.com/default.aspx
   
  For more information see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Here is the link to the support technology guide:
  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

  Important note:
  This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ultra computer window 7 not sometimes wake up after hibernation

  I am running windows 7 ultra on computer dell xps QuadCore 8300 and recently my computer sometimes wake up after hibernation when I move the mouse so I have to shut down the computer using the power button can you help me.

  Go to your control panel and go to your Power Options. No matter what plan you have selected, click on "Change plan settings", then click "change advanced settings of power."

  This should open a list of options, now click on the button '+' option of sleep and
  change the "Allow hybrid sleep" to "Off".

  Just a note, you can avoid only the computer from sleep mode hybrid, means the hard disk activity will remain intact. So the next time your windows is asleep, you can always get on easily by just moving the mouse or pressing a keyboard button.

  Please see the link below. And I believe that it is a desktop computer?

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• Can not reinstall the software after change of hard disk

  My old hard drive failed on me last week, so I had to buy a new one. I want to reinstall my suite adobe CS5.5, but the computer just spits the disc after a few minuets. What I am doing wrong?

  I have a mac book pro, mid-2009, with Snow leopard OS x 10.6.8

  You can work around the disc and download the free trial from the page linked below.  Then use your serial number to activate the software to use fully.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

  If it works, then there may be a problem with the configuration of your hard drive.

• Touchpad does not retain the settings after restart on satellite series

  the touchpad on my equiem is too sensitive, I can adjust and works very well for this session, but when I reboot it refers by default, I have saved the settings etc. but will not always be together

  Hello

  He s strange and not usual.
  Have you tried reinstalling the driver for the touchpad?
  Try to download and install the latest version of the driver for the touchpad Synaptics Web site of the and repost it please the results.

• 10 Windows will not recognize USB-6211

  
  

  Well, several hours to uninstall and reinstall later, the device is recognized again. It even works in Labview.

  The only thing that happened between the work and does not, it is for other Labview products trial period expired. Maybe messed something up or maybe not.

  I just hope that it still works now.

• Computer does not recognize USB devices after startup XP

  Computer was working fine.  Moved (by car) to another office.  At present, the keyboard will work until the time starts windows XP (SP3); It can control the it function and has a light illuminated NUMLOCK.  As XP starts, the Numlock light turns off and the keyboard is no longer functional.  It is obvious that the keyboard works, and the USB seems to be OK because he has worked with several installed keyboards until XP load upward.

  Any suggestions are appreciated!

  What type of laptop do you have? In the BIOS make you emulation USB is lit and also make sure that in XP right click on my computer got in the hardware Manager then drive and make sure that there is no '? ' marks in the screen of your driver. Otherwise, this looks like a motherboard might be on the fritz...

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• New Microsoft Windows 7 Pro 64 workload on a Folio HP book - Windows will not update even after running the tool

  I received a book of 13-2000 HP Folio damaged software.  Had to reload Microsoft Windows 7 Pro 64.  Windows is not the updates even after running the Microsoft 'tool' and 'fix it tool.  What is the last manual way to solve this problem.

  What is the last manual way to solve this problem.

  The last manual is to install the latest version of the Windows update client.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ