Windows xp routing table problem
I'm having a problem with windows routing tables on the pc at my workplace.
These computers are running windows xp sp3 and the problem occurs when I change the default gateway
the PCs are on subnet 10.181.1.0/24 with d/g 10.181.1.11.
with this configuration, the routing on each pc table works as expected [for example, it stores a
Directions to its own subnet [10.181.1.0/24] but no way to other subnets [for example, it will not store
a road to 10.180.1.0/24, it will simply send this default network traffic
gateway].
However, due to a re-design network, I need to change the default gateway for this lan
to 10.181.1.254. When I do cela something strange happens. the windows routing table on
each pc begins to store routes to the entire 10.0.0.0/8 network, even if the current
config on the pc is still a 24 network [for example, 10.181.1.21/24, d/g 10.181.1.254].
its as if when I change default gateway from the computer, windows, pleasures of the routing table of the
10.181.1.0/24 subnet as if it were a network 10.0.0.0/8 classful.
While, right? I can still connect to other networks, the pc is just using a route
stored in its routing table local instead of sending traffic to its default gateway.
The problem is that we have a 10.181.1.12 default backup gateway that we switch to
If the primary gateway goes down. When we test failover to 10.181.1.12 pcs are always
Send non-local traffic to 10.181.1.11 [because they still have these routes stored locally in their]
Windows routing tables]. I want to send traffic to 10.181.1.254 [switch a core of layer 3, which then]
two lanes of traffic to 10.181.1.11 or. [12]
I tried to change the default gateway to a range of ip addresses and the same problem occurs every time.
I rebooted each pc after having changed its d/g and the problem remains the same. I tried
delete all the information off the power the pc ip address, then re-enter with the new d/g, then restart
the pc but the problem remains the same.
so, to summarize, when I change the d/g from any pc on the 10.181.1.0/24 subnet, computers table routing begins to store routes
in its local routing table to the classful, instead of just the classless 10.181.1.0/24 network 10.0.0.0/8 network.
Has anyone encountered this before?
Hi biglouie2010,
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.
http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
Tags: Windows
Similar Questions
-
So, today I received my new 9320 at Virgin Mobile, first Blackberry & love the phone! but I can't use the BBM or Facebook app...
At first I could not even access the browser while that connected to my wifi... then I phoned Virgin & they helped me to reset the settings on my BB that I could use the browser etc...
I thought it was problem solved, until I discovered BBM and Facebook, use app world separate service? Anyway, I phoned up to Virgin because I wanted to do this job, they are included in my package & I did not understand why I can't access any of them...
After a long phone call the problem has proved that the "host routing table" was empty and (according to in Virgin) there is a problem with new BlackBerry receiving these details... they said this isn't a problem on the end there & told me there is nothing more they can do so to click 'register now' and wait for the details...
24 hours later and nothing, so I hope someone here can help me, make me a BB the whole point is things miss me actually lol and I feel now I'm paying for a phone contract I can't really use it, without any help from my provider?
Any help?
Or
Anyone with a new BB knows something like that recently? Thank you
Wow... Virgin you gave really there. You see, you PAY for 100% of your services and 100% of your formal support... at the moment, they seem to be or you deliver. Only they have the ability (in fact the RESPONSIBILITY!) to degenerate RIM requiring improved support of cases (from your description, it must be that... with a HRT empty, nothing that anyone here can do). End users have no free path to receive assistance from the RIM at all - only via the escalation. So, what I would do if I were you, is their ring back... but this time do not let you fob OFF... insist that, because you HAVE them, you have a contract with them and they are about to be in violation of this contract - they must solve your problem, degenerate into RIM if they wish.
Good luck!
-
Problem using a conditional branch and routing table
Hello world
I need to check the indicator of payload of my entry, depends on that I have to call one another operational branch for each conditional branch.
For example: if my flag is 'E', then I have to call 2 different business services still have 2 different business services.
If I use the routing table, I can't call operational management in it.
I tried to skip logic and I get the following error: [BranchNode1] one branch conditional node specifies an invalid xpath: an error has been reported to compile the XPath: except for XQuery
Can someone help me.Ok. With little understanding of your scenario, I guess you will call the same set of services on the basis of the IF and ELSE, but their internal processing would be different.
What you can do is-
Proxy main - if-> Proxy (local transport WSDL based)--> operational connection
| - other---> Proxy B (WSDL based transport)--> operational connectionTo develop-
Main proxy's proxy that would receive applications from the outside world. Using conditional branches, route the incoming request to either A proxy or A of the b. Proxy Proxy and Proxy B will be based on the same WSDL (WSDL according to type of proxy) and their transport must be selected as 'local' to keep them invisible to the outside world. Proxy now A and B of Proxy, you can have operational branch and provide the implementation you want.
Kind regards
Anuj -
WSN Routing Tables and better path decisions
Hello
My team has placed a total of 10 knots in an industrial environment of factory. Nine are defined as routers, and there is only one end node. The gateway is a little in the center of this area, and there is no node failed. The coverage area is four floors with approximately 63000 square feet of floor area per level. I'm having a problem with a section of the path used to reach the end node: a quality signal between the 3rd and 4th routers gateway has been ignored in favor of a lower quality signal. If I take this 4th router and move it very closely the 3rd router and do a reset it will pick up the 3rd router signal and remain at about 60% intensity of the signal for several minutes. However, this 4th router will soon fall sharply to about 20% intensity (much less that NEITHER recommended by 30%) of the signal. The network is to decide than 3 jumps of signal is relatively good is worse than a jump involving a bad signal? Also, is there a way to read what are routing tables to determine if it is indeed the case?
Thank you!
Garrett
We suggest you use the least necessary routers for your background. Routers add the chance for the performance of the network has declined due to uninteded jump. Then, even when food is available, the default choice for the nodes must be nodes except routers are needed.
-
Cannot add a permanent route to the routing table.
Hello world
I tried to add a routing table that for some reason I can't do a ping on the Internet of some windows xp machines and I was adding "see Pei add 0.0.0.0 mask 0.0.0.0" and after you type this command, I was able to do a ping on and everything was going well until I rebooted. "." Whenever I reboot I am unable to ping but if I add "PEI route add 0.0.0.0 mask 0.0.0.0 it works again." It print my route continued under the road, but it doesn't seem to work when I reboot. Any help would be greatly appreciated.
Persistent routes:
Network gateway address mask network address metric
0.0.0.0 0.0.0.01 Any help would be greatly appreciated.
MichaelOriginal title: Windows XP adding a road permanent in the Routing Table (persistent route)
Hi Michael Rodrigues of La Mancha,
I wish you post your question in the TechNet Forums because it caters to an audience of it professionals.
Check out the link-
Hope this helps!
-
Windows 7 blue screen problems
Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...
Hello
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
so time of the BSOD for more information on the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
DMZ-Link bandwidth does not change the routing table countin traffic
Hey guys
I'm INE laboratories dong and shoved a weird one that delivers.
I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.
Here is my configuration:
Rack1R6 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 54.1.1.254 distance-54
neighbor 54.1.1.254 dmzlink-bw
neighbour 155.1.67.7 distance-300
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
No Auto-resume
Rack1R6 (config) #.
Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 54.1.1.254 0 54 I
* > 28.119.17.0/24 54.1.1.254 0 54 I
* > 112.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 113.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 114.0.0.0 54.1.1.254 0 0 54 I
* > 115.0.0.0 54.1.1.254 0 0 54 I
* > 116.0.0.0 54.1.1.254 0 0 54 I
* > 117.0.0.0 54.1.1.254 0 0 54 I
* > 118.0.0.0 54.1.1.254 0 0 54 I
* > 119.0.0.0 54.1.1.254 0 0 54 I
r > 155.1.0.0 0.0.0.0 32768 I
Rack1R6 (config) #do sh ip bgp
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i28.119.17.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i114.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i115.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i116.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i117.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i118.0.0.0 204.12.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
*> 54.1.1.254 0 0 54 i
* i119.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
r i155.1.0.0 155.1.146.4 0 100 0 I
r> 0.0.0.0 32768 i
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* > i205.90.31.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i220.20.3.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i222.22.2.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
Rack1R6 (config) #.
# now R4 configuration
Rack1R4 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 155.1.45.5 distance-200
155.1.45.5 route-neighbour card GAME-54 on
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
neighbour 204.12.1.254 distance-54
neighbor 204.12.1.254 dmzlink-bw
No Auto-resume
Rack1R4 (config) #.
Rack1R4 (config) #do sh ip bgp Synt.
Local router BGP 150.1.4.4 identifier UNDER number 100
BGP table version is 18, table 18 main routing version
15 entries for network using 1980 bytes of memory
18 entries for path using 936 bytes of memory
9/7 BGP path/bestpath attribute entered using 1512 bytes of memory
3 entries for BGP AS-path ACCESS using 72 bytes of memory
1 entries PMO community, using 24 bytes of memory
0 cache entries of BGP route-map with 0 bytes of memory
0 cache entries of filter-list BGP using 0 bytes of memory
Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory
BGP using 4620 total number of bytes of memory
Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds
Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd
155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3
155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3
204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10
Rack1R4 (config) #do sh ip bgp
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* i205.90.31.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i220.20.3.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i222.22.2.0 155.1.13.3 0 100 0 200 254?
Network Next Hop path metrics LocPrf weight
*> 155.1.45.5 0 200 254 ?
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
* > 205.90.31.0 155.1.45.5 0 200 254?
* > 220.20.3.0 155.1.45.5 0 200 254?
* > 222.22.2.0 155.1.45.5 0 200 254?
Total number of prefixes 14
Rack1R4 (config) #.
# and where is the real problem, R1
Rack1R1(config-Router) #do sh ip bgp
Version of BGP table is 15, local router ID is 150.1.1.1
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i28.119.17.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i114.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i115.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i116.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i117.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i118.0.0.0 54.1.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
* > I 204.12.1.254 0 100 0 54 I
* i119.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i155.1.0.0 155.1.146.6 0 100 0 I
* > I 155.1.146.4 0 100 0 I
* > 205.90.31.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 220.20.3.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 222.22.2.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0
112.0.0.0/8, version 4 BGP routing table entry
Paths: (2 available, best #2, table by default-IP-Routing-Table)
MPIO: eBGP iBGP
Announced for the update-groups:
1 2
54 50 60, (from a customer-RR)
54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)
Origin, IGP, 0, 100, valid, internal multipath localpref metric.
DMZ-Link Bw 250 KB
54 50 60, (from a customer-RR)
204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)
Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best
DMZ-Link Bw 12500 KB
Rack1R1(config-Router) #do sh ip route 112.0.0.0
Routing for 112.0.0.0/8 entry
Known through 'bgp 100', 200, 0 distance metric
54, internal type tag
Last update of 204.12.1.254 ago 00:15:30
Routing descriptor blocks:
204.12.1.254, 155.1.146.4, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
* 54.1.1.254, 155.1.146.6, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
Rack1R1 (config - Router) #.
as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...
can you please help me if I makeover anything in my setup?
Hello
Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.
-
VPN3005 RIP routing table number!
Dear all,
Just got back from VPN3005 of the client configuration. We got a "serious issue" with the VPN3005 routing table (or VPN3000 series in general). VPN3005 accepts only 199 road exactly. Not more not less. An itinerary announced by the other router is rejected by VPN3000 and "complete routing table" generated in the journal. I'm not aware of this limitation in the table, made it write somewhere in the manual or FAQ? Someone has the same problem? What other VPN3000 series, do they have the same restriction as VPN3005?
BTW, the VPN3005 is equipped with the latest v3.6.7
Would be very appreciated for any help!
Best regards
Engel
Hello
You are right, the VPN3005 can hold a maximum of 200 roads and this is normal.
You can see below the URL of the FAQ:
http://www.Cisco.com/en/us/products/HW/vpndevc/ps2284/products_qanda_item09186a0080094cf4.shtml
Kind regards
Arul
-
BlackBerry smartphones don't host Routing Table - no entries
Hello
I have a Blackbery Curve 8520. I have a problem with the connection to the mobile internet. When I entered the host Routing Table, it only shows me no entries. I registered several times but nothing happens. I have a gift of freedom of Vodafone afford data unlimited but I can't connect at all. Could someone help me? Thank youDo you have a data Plan BlackBerry enabled on your account with your carrier or mobile provider?
You have to, to get the push RIM email functions you are looking for, as well as services of BlackBerry data such as the Web browser, Facebook for BlackBerry, BlackBerry Messenger and much more.
Then call your carrier and you learn about to have added to your account BlackBerry data Plan.
Good luck.
-
[Solved] RV082 - SRP527W site-to-site VPN - routing table?
Hello
I am trying to create a VPN IPSEC link between 2 offices. The VPN connection is created, and I can connect but only one way.
Customers in the Office B seems to have a routing problem. Can you help me?
Details :
Office:
-Router SRP527W.
-Network client: 192.168.0.0 / 24
-Internal address: 192.168.0.254 / 24
B office:
-RV082 router (behind another router)
-Network client: 192.168.6.0 / 24
-Internal address: 192.168.6.253 / 24
-Internal address that goes to the Router 1: 192.168.5.253
internal address of the Router - 1: 192.168.5.254
Page layout:
Office---> SRP527W---> INTERNET<----- global="" router=""><------ rv082="">< office="">
192.168.0.254 192.168.5.254 5,253 6.254
Details VPN:
Office:
-remote type SUBNET = 192.168.6.0 group / 24
-local group = SUBNET 192.168.0.0/24
-Address ID = 82.127.XXX.XXX
B office:
-remote type = SUBNET 192.168.0.0/24 Group
-local group = SUBNET 192.168.6.0 / 24
-IP address = 192.168.5.253 (accessed from the Internet through the 1st router with the IP 37.1.XXX.XXX)
Facts:
A desktop, I can ping everything in 6.0 addresses.
Office B, I cannot ping anything in 0.0 subnet addresses. The router itself with the diagnostic page, works of ping 192.168.0.1? But no other ping. Curious...
The desktop computer B routing table shows the following:
Active routes:
Destination network mask network Adr. Gateway Adr. interface metric
0.0.0.0 0.0.0.0 192.168.6.253 192.168.6.10 10
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.6.0 255.255.255.0 192.168.6.10 192.168.6.10 10
192.168.6.10 255.255.255.255 127.0.0.1 127.0.0.1 10
192.168.6.255 255.255.255.255 192.168.6.10 192.168.6.10 10
224.0.0.0 240.0.0.0 192.168.6.10 192.168.6.10 10
255.255.255.255 255.255.255.255 192.168.6.10 192.168.6.10 1
255.255.255.255 255.255.255.255 192.168.6.10 3 1
255.255.255.255 255.255.255.255 192.168.6.10 1 40005
Default gateway: 192.168.6.253
===========================================================================
Persistent routes:
None
Tracert from computers to Office B shows that the packages have arrived at 192.168.6.253, and then it never achieved anything.
The problem is related to the architecture of Office B?
See the files attached to a layout of Office B and the routing of the router table to Office B.
Thank you.
Enable NAT - T on the RPS and configure the remote ID as 192.168.5.253 in the IKE policy.
Not sure about the RV and if supporting NAT - T. It can automatically detect the NAT - T, or need to be configured (in this case, you configure the local identification)
Andy.
-
BlackBerry Smartphones host empty routing table
Hi I have a curve 8900 blackberry...
After you remove the service book, performing the hard reset by pulling your battery while your BlackBerry is on and reinsert again. Now try to join the host Routing Table. THX.
"This problem can be caused if the wireless service provider has not properly configured the BlackBerry smartphone to BlackBerry data services.
Contact the wireless service provider to apply the correct service for the BlackBerry smartphone development plan ".
-
Roads remain in the routing table after disconnecting from the vpn client
I am facing this problem for my clients and the easy vpn server.
My Cisco 3825 has an easy vpn server configuration with an ip pool. When one of the customer disconnects and isakmp and ipsec his deleted by the router itself. The route pointing to the ip address of the ip pool is still in the routing table. This time, another vpn client connects and get the ip address of the ip even pool. But this new vpn client connected is located on a different interface of the router. Thus, an extreme problem happen! A route to 2 next hops is created! So bad!
Someone else can help me? How can I delete the wrong way?
Thank you!
Jason Lam
It can be useful to upgrade because he accompanied several questions IPP in earlier versions of the code with the roads not removed during the SA goes down, etc.
-
BlackBerry smartphones not the host routing table entries
My blackberry storm2 shows no entries in the host routing table. I'm on a service plan that supports BIS everything was fine. My phone rebooted for no reason, and that's when the problem started
Help, please
Hello and welcome to the community!
I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):
(1) registry HRT
- KB00510 How to register a BlackBerry smartphone with wireless network
- Please wait a 'registration' message reach your Messages application
(2) remove and return Service directories
- KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
- If you do not have access CMIME, continue deleting
- KB02830 Send the directories for the BlackBerry Internet Service
- Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.
(3) restart to take batt
- Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.
I hope that will move things again for you! If any stage does not properly complete, proceed to the subsequent steps will be useless... and you will need to contact your mobile provider for formal support. It's their network that your BB is unable to communicate with, after all.
Good luck!
-
Windows 7 disk expansion problem
I increased my VM size from 100 to 200 GB (on a terabyte) using the settings side MAC VMWare...
In the computer management console Windows 7 (see table), I can watch the disc resulting and my C: drive was still only 100 GB. However, at the bottom of the disk management screen, I show a 0 with 200 GB drive. The bar of disk 0 is contiguous, as far as I can see. I right click on the C: drive in the top of the screen and see 'Extend the Volume', but this choice is grayed out.
I closed down VMWare completely a couple of times and delivered to market with no luck.
How to get Windows 7 to recognize that additional 100 GB?
Best
Harry
OK, problem solved!
First of all, I upgraded from 6.0 to 8.0 VMFusion. I increased the size of the virtual disk by 1 GB - just enough to trigger a repeat of the virtual disk increase routine. Before the upgrade, I could not successfully increase the size of the disk - it would fail at the end of the (long) process.
I restarted WIN 7 under VMFusion 8.0 and went to the computer management | Disk management. Now I could right-click on my C:\ drive and the menu option "Extend drive" was available. Before the upgrade, this option has been grayed out.
After that, it appeared that nothing happened, BUT if you go to the right of the disk management INTERFACE, you will see 'Other Options'. You will find 'Refresh '. Finally, it showed my disc finally expanded from 100 GB GB 261.
Thank you to all the Chorus for help - it is much appreciated!
Best
Harry
P.S. I'll mark this as 'proper' so we can close this point, but it truly reflects the great help I got some people in this thread.
-
Need on VM esxi, vcenter server routing table entry?
I have a system that has everything on the gateway for network management network 172.16.1.0 172.16.1.1. I have connected to the system a small Buisness router on the same network, but with a 172.16.1.70 bridge, it connects to another SME via IPSec VPN router to an offsite location, its network is 192.168.5.0. from a server on 172.16.1.0 network I can connect to 192.168.5.40 Nas device on the other end. However, I would like to be able to connect as vmware or ISCSI nas storage and VMware will nor the server will allow ping of the network to the other end.
I think it may need an entry in the routing table to tell him to use the 172.16.1.70 bridge when he must see 192.168.5.0 network. I think that it's solve my problem, how this range would get in the 172.16.1.25 Server routing table (Vcenter server) so that it sees the Nas/ISCSI store at the other end using ESXi and Vcenter?
On the vCenter server:
route add 192.168.1.0 mask 255.255.255.0 172.16.1.70
Ben
Maybe you are looking for
-
I have a library with hundreds of playlists and 13 000 songs. Currently, the itunes library folder is in a custom location. The root folder with all the mp3 files is also in a different folder on another drive. I don't want to consolidate my library
-
In Safari, an alert appeared: the computer can have 3 viruses, download MacKeeper and scan your computer, the IP address: 78.146.23.13 What should I do?
-
I was wondering if there was something in this direction in LabVIEW to create a shortcut for this, rather than try to hardcode it after the fact. Does anyone know this method I'm talking about? (IEC 60601-2-24 dry 50) Please let me know because I'm f
-
HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of baseHKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\SqmHKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_K
-
I tried to send the file to a folder compressed zip or file and then try to extract all file or folder. I can't install the program files. Can anyone help me please with this situation?