Windows xp rp_skt32.sys Securty Services Driver needed
Windows XP is looking for "c:\program InstallShield installation information\ {c44365d5-634a-4d55-9b9c-346ff6ed76be}.
-Then a popup window says: "the rp_skt32.sys file on Securty Services driver is necessary."
Where can I download driver? Thank you.
Hello
1. What is the brand and model of the computer?
2. you made any hardware or software changes to the computer?
3. when exactly you get this error message?
4. What is the security software installed on the computer?
Please answer these questions so that I can guide you accordingly.
If you suspect an infection by the virus on the computer, and then start the computer in safe mode with network and perform a virus scan.
To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Security Scanner warning: there will be data loss through an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
I hope this helps.
Tags: Windows
Similar Questions
-
Windows cannot be installed on the drive needs the driver for device
Transition from XP to Windows 7 Edition Home Premium. I'm following the instructions to upgrade to XP.
Primary IDE Channel - how to find what device needs a driver and then go in and install it?
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the drivers card mother/chipset (F6 during installation of Windows 7), SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsUpdated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
Windows 8 - nvidia geforce go 6150 driver needed-
Hello
Recently updated edition of Windows Vista Edition Family Premium in Windows 8. HP Pavilion dv6000 (RV018UA)
The display display driver is Microsoft base display adapter 6.2.9200.16384 (21/06/2006). However, my laptop has NVIDIA GeForce Go 6150 graphics card. How can I get this driver.
Kind regards
ScottHi, Nadia:
See if you can manually install the driver Vista support for your laptop and driver page.
Download and run the file above.
If she-error, close out of it.
Go to Device Manager and go to the display of the maps section. Click on that and click on the basic graphics card device. Click the driver tab click on Update driver. Select travel it my computer for the software method and locate the installation folder that was created when you ran the file.
This file will be located in C:\SWSetup\sp35686.
Make sure that the include subfolders is selected, and I hope that the driver will be installed.
Paul
-
CD/DVD drive - need to reinstall the driver
Hello
My computer does not recognize the CD drive. It is a new machine (a Lenovo H535, if this is important) and I managed to install software immediately, but he has not worked since. When I went through a troubleshooting (Windows 8), it tells me the driver needs to be reinstalled (matshita dvd - ram sw830, in the case where aid), however, if I update the driver, it does not. I don't know this driver online, to try to reinstall from scratch. I tried looking at Lenovo drivers or useful information website, but I'm not having any luck.
So, is there a way to fix this driver? Or where can I find a replacement driver?
To make this all a little extra fun, I'm brand new on Windows 8 (jump directly from XP, with superficial relationships on Vista of my grandmother), so I'm having a devil of a time trying to find my way on this thing. (Translation: all aid should be gradual for this noob Windows 8)
Thanks in advance for any help!
Refer to the link below
https://support.Microsoft.com/kb/314060/en-us
hope this helps you
-
original text: P17.sys
I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...
Hello
- What is the exact error message you get?
- Are you not sound on the computer or Rocketfish?
If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsOtherwise, I suggest you to give us more information about the issue, so that we can help you better.
It will be useful.
-
Original title: file "c:\windows\system32\drivers\afw.sys" agnitum firewall driver, how to find it.
I downloaded a trial version of Bullguard internet security and while downloading stopped at one point and ask for the file above. I tried a nd produce no result. Any ideas please. Thanks, pete
C:\windows\system32\drivers\afw.sys with description Agnitum Firewall NDIS Driver is a driver file of Agnitum Ltd. belonging to Outpost Firewall product.
The file is digitally signed Agnitum Ltd. - VeriSign Time Stamping Services signatory - G2
We do not recommend remove digitally signed files from Agnitum Ltd.
Chk this link
http://www.OutpostFirewall.com/Forum/showthread.php?22526-missing-Afw-sys
Replace the file from another computer and check.
try to download it from this link
-
Pavilion DM1: Stay before moving on to Windows 10 kl1.sys driver search
Fault of kept my upgrade to Windows 10 and I found this driver kl1.sys had been let go a previous uninstallation. He was not related to any process underway and once deleted my upgrade went smoothly.
It may solve upgrades at a standstill, look out for what he
-
Original title: iso to wim
I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.
Thank you
Because you are dealing with Windows Server 2008, I suggest that you go on the TechNet forums and re after your question here. They are better equipped to help you with questions regarding the problems of Windows Server.
Thank you! -
This program of Windows XP (my wife) is on a MacBook Pro with a PC emulator (Bootcamp). The drive needs to be replaced. How can I save data from the PC to an external hard drive?
Hi Alan,
Thanks for posting in the Microsoft Community.
I understand you are trying to backup the data on external hard drive since you replace the hard drive.
I will definitely help you with this.
Please visit the links; This should help you in files and backup files.
How to use the backup utility to back up files and folders in Windows XP Home Edition
-
Services Windows problems after cloning a HARD drive
Hello
I recently cloned my HARD for one SSD drive, using the SSD as my boot device. Since then, I was able to successfully access Windows services.
For example, I've tried to expand a partition on my SSD and went to computer management. I got a message saying that it
"cannot open log events on the computer service.
I click OK and the computer management opens.
Clicking on device management, I get a long enough message that appears that says
'Disk management could not open Virtual Disk Service (VDS) [name of the hard drive]. This can occur if the remote computer does not support VDS, or if a connection cannot be established because it has been blocked by a firewall of Windows. For more information see on diagnose and correct this problem, see Troubleshooting Disk Management by using disk management. »
I click OK and the message disappears.
If I click on Services and Applications in the left pane I get WMI control and Services in the central pane.
I double-click on Services, scroll down to virtual disk, double-click anywhere on the line, I get
"Windows could not open the service of virtual disk for playback on the local computer. Error 1726 the remote procedure call failed. »
Is someone can you please tell me what is happening? What have I done? Why am I not able to access disk management?
I tried sfc/scannow and I get the message
"Protection of resources Windows could not start repair service".
EEK! What have I done?
Thanks for the help, but I thought about it.
I had turned off by mistake in my BIOS PATA, and causing the problem.
Thank you for taking the time to respond, however. It's very appreciated.
-
Windows vista sys. error message says need to adobe flash player 9.0 or later. I have this already. cannot run videos from internet
Hello
This can help you:
Download and run the Flash Player Uninstaller, as Flash can get damaged.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
-
Photos may not be printed as a service that needs Windows does not work
One morning last week when we turned on the conputer lots of things had changed. I finally got my page online straightened out, but I could not print photos that were stored in the computer. When I tried I got the message "Photos cannot be printed because no printer is installed or a service that needs Windows does not work. And I wasn't able to print with my camera card inserted in the printer. I was able to print the text so that the printer is of course. Can you help me? I must add thaat I was able to print photos using the map to a pharmacy machine then the card is OK.
Wendell Bard
Hello
1. What is the brand and model of the printer?
2. you remember to make changes on the computer before the show?Method 1:
You can perform troubleshooting of the printer and check:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Method 2:
If the problem persists, you can perform a restore of the system to the point when it was working fine and check:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaYou can also check out the link:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsFor more information, please see the link below:
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print -
I need driver audio windows enterprise 8 for asrock g41m-vs3 r2.0 motherboard.my new windows is loaded, but not his driver .other that I got take advantage of windows 8 Please help.
According to this site:
http://www.ASRock.com/MB/overview.asp?cat=download&OS=all&model=G41M-VS3 R2.0
There is no driver Win8 MB for. You can try to install the Win7 audio driver in compatibility mode.According to VIA, this Windows 8 driver:
http://www.via.com.tw/en/support/drivers.jsp
supports the VT1705 chipset, which is what your MB.
(Step 1 - Windows
Step 2 - Windows 8 bits - xx
Step 3 - audio
Step 4 - VIA HD Audio codec VT1702S, VT1705 VT1708B, VT1708S, VT1716S, VT1718S)SC Tom
-
Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.
Original title: Windows Store-downloads
Try the troubleshooting steps below after completing the methods provided by Vinodh.V
Method 1: Make sure that the Date and the time is accurate
Open quick run (Windows key + R)
Type timedate.cpl , and then click OK
Click the Internet time tabClick change settings
Click update now , and then click OK once the time is Sync
Method 2: The problem may be caused by the Proxy settings
If you use a Proxy
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Of that type the below command and press enternetsh winhttp import proxy source = ie
If this does not work, you can reset the proxy settings using below command
netsh winhttp reset proxy
3:Fix Windows Update method
Running Windows Update troubleshooting tool can solve some problems.
Open Control Panel
Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view
Select the fixed problems with Windows update.
Select Next and then click Finish when the process is complete
Method 4: Search for the latest Windows updates
Open quick run (Windows key + R)
Type wuapp , and then click OK
Click check updates
Download and install all pending updates.
Restart the computerMethod 4: perform the Scan SFC
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Type in the command, and then press on enterSFC/scannow
Method 5: Upgrade to the Local account and switch it to the Microsoft account
To switch to local accounts
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click on your account
Click Disconnect
Enter the current user password and click Next
Click sign out and finishing
Log on to the user accountTo switch to the Microsoft account
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click to connect to a Microsoft account
Enter the current password
Enter the password of the Microsoft account and click Next
Click switch -
Windows 7 driver needed for epson perfection 1260 scanner
Windows 7 can not find a driver for my Epson Perfection 1260 scanner
Moved from feedback
original title: epson perfection 1260 scanner
If you determine that this is not the correct driver, search here:
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes
The piloted for a scanner Epson Epson will not come Microsoft.
Try the link contact us here:
http://www.Epson.com/cgi-bin/store/help/help.jsp?BV_UseBVCookie=Yes&category=products
Don
Maybe you are looking for
-
My iPod Classic 160 GB is not connecting to my PC.
I reformatted and restored but he barely stayed in long enough to do these things.Help is appreciated.Kind regards.
-
Windows Media Player no longer works.
Windows Media Player no longer works when I click on the desktop icon, menu start, insert the CD or download the E-mail WMV file.The following message appears "Windows Media Player is not installed correctly and must be reinstalled. "You want to inst
-
I am not able to see my stuff on my desk, I fear he may have crashed. What can I do to recover it?
-
When the Windows 7 drivers are going to be published (model w2338h)
I have a similar problem to many people here. I have a new PC with Windows 7 (64-bit) and Vista driver just does not. After nearly 2 hours on the phone with the support of last night, we finally got to be recognized as the w2338h monitor "Generic M
-
Hello In my application, I have to open some exisitng messages at the click of a button... I know that the message id of the email which has to be opened... How can I open this mail?