Windows XP SP3 - installation of Office 2007 trial version - Windows Installer 3.1 fails to load. Manual loading of Windows Installer 3.1 not successful due to advanced SP3 Installer. Is there a workaround to allow the installation of Office 2007? __

Similar Questions

• Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix? __

  Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?

  In the Task Manager, click on "File" and select "new task (run).

  Type explorer.exe, and then press the ENTER key.

  If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.

• Is there a way to allow the members of a role to be reviewers of a document?

  I have a workflow which notify the user when it is released. The workflow should simply inform the user of the document was checked in the system and can be viewed. There is no action to be taken place by them. However, I see that you can only assign a user or alias of a workflow, but we use the list of role (xClbraRoleList) access to our security.

  I have an email address for notification of workflow should be sent, but the e-mail address is for a group.

  Is there a way to allow the members of a role to be reviewers of a document? Can you use tokens to get there?

  Kind regards

  Sandra

  Good so how about having an alias in your email tell [email protected] system, which can have several users under this alias and so on for the other departments. On the side of WCC, you can have a single user per Department and assign this ID e-mail as ID the user's e-mail alias and so on for the other departments and then use those users in your notification of workflow.

• Windows 10 Lightroom 6 (not CC) installed and reinstalled but still opens with a HUGE text in the two panels, leaving only a small space to see photos. Preferably and other screens also occupy more than full screen. Appears as tho Lightroom is in failure

  Windows 10 Lightroom 6 (not CC) installed and reinstalled but still opens with a HUGE text in the two panels, leaving only a small space to see photos. Preferably and other screens also occupy more than full screen. Appears as tho Lightroom is in failure Mode (failure mode). Can anyone help?

  Hello

  Click Edit > Preferences

  Go to the interface tab and check the font size: it should be automatic.

  Press enter

  Restart the Lightroom

  Thank you

• There is workaround to get the playback mode by default when I start the software adobe reader DC?

  There is workaround to get the playback mode by default when I start the software adobe reader DC?

  Hi Keeperparma,

  There is no option in Acrobat reader to customize playback mode when you start the player, but you can configure for a specific file by using the "view original" feature of acrobat, but which apply only to this specific pdf.

  Kind regards

  Rahul

• Windows Anytime Upgrade was not successful, try again to upgrade - WHY WHY WHY?

  I bought Anytime Upgrade Home Premium Online and I am trying to upgrade.

  Everything is fine - after checking the key, accepted the terms, clicked on the next button and start the system to be upgraded.
  But after a looooooong time, it says "Windows Anytime Upgrade was not successful, please retry the upgrade."  WHY? WHY?  WHY?
  I tried to re-setting level for many times.

  Try to upgrade your Netbook to Windows 7 SP1, then try again the anytime upgrade:

  Learn how install Windows 7 Service Pack 1 (SP1)

• Lightroom 5 does not open it gives me an error message there is an error during the reading of his preview cache and must completely

  Lightroom 5 does not open it gives me an error message there is an error during the reading of his preview cache and must completely
  He said also he will try to fix it the next time it opens, it does nothing

  Check this thread. Your previews Cache files are corrupt.

  Re: Preview cache?

• I'm having some trouble with the installation process. I want to install a trial version of AI, but my adobe application manager keeps inviting them to update but will not go beyond 10%. I tried uninstalling and reinstalling but the problem persists. Help

  I don't know what to do. I'm trying to download a trial version of A.I., but when downloading, my adobe application manager keeps trying to update but will not exceed 10%. I can't access anything on my manager. I tried to re download the program, but the same problem persists. What are my options?

  If you just open the Application Manager, it successfully updated?

  In Illustrator, you can download setup offline http://prodesigntools.com/adobe-cc-2014-direct-download-links.html (CC 2014).

  Make sure you follow the instructions very important on this page.

• FixIt center operating system is not compatible Windows and update does not work due to 8007066

  I have an Asus Essentio with Windows 7 Professional. Although the computer was working ok, I installed the FIX It Professional [I bought it to install on my computer to girls] for the interview. Since then, I had several problems with slow MSN Mail and slow performance. I uninstalled the product and to restore the computer to the date of installation of the software. Here are some of the problems I have:

  When you try to run Microsoft difficulty It Center I get a message "the operating system is not compatible and must be XP or newer" which it obviously. I've used this program in the past without any problems and actually have a user account, but it still does not work.

  Trying to access Microsoft support told me that the software is not "enabled" even though it says it's under System properties, and the product number is not saved, even if it has been for more than 8 months.

  Whenever I click on the MSN butterfly, a security message wonder if Explorer is allowed to make changes to my computer. Not a big deal, but remember why nobody liked Vista and I would like to get rid of him.

  A Windows Update does not work due the 8007066f, who doesn't have a solution, but updated logo keeps interrupting my work.

  Thanks for any help.

  I suggest an Inplace upgrade to fix your computer.

  The upgrade in place is a tool to fix the system. Thanks to the special upgrade process, we will be able to repair the system. The upgrade in place will not affect the settings like photos, movies, documents, etc. that are saved on the computer. Although this operation will not remove or modify the files and installed programs, I suggest always that you back up important files before you do. In addition, you may need to reinstall the device drivers after this operation.

  The detailed steps are included as below:

  On-site upgrade
  ====================
  1 log on to the system first.
  2. Insert the Windows 7 DVD in the DVD drive of the computer.
  3. Click Start and select computer.
  4. find the "setup.exe" file in the DVD-ROM and double-click it.
   
  5. click on install now.

  6. When you are prompted to enter the product key, please click Next directly without entering any key. The installation wizard will prompt and ask if you confirm to install Windows 7 without the key and choose please confirm.

  7. When you get to the screen ' which type of installation you want', click upgrade to upgrade the Windows 7 system files.
   
  Note: When running the upgrade on the spot, the system will restart automatically (several times) to merge the files and programs, please leave the computer alone and does not configure it until the 'upgrade on the spot"finished. The system should start Windows 7, once it is upgraded. Once the computer is running "upgrade on the spot", you can go and leave the computer and it completes automatically.

  Let us know if that helps.

• Windows live mail could not open due to low system resources

  Whenever I'm on a page that contains a link to send an e-mail message, I get the 'Windows live mail unable to open due to low system resources."  What is the reference for this?

  TIP: Start your own, new thread about your problem and your computer in this forum-online http://answers.microsoft.com/en-us/windowslive/forum/livemail-program

  TIP: Make your version of IE, the full version of Windows (for example, Win7 SP1 64-bit) and your current version of Windows Live Mail (if possible) in your first post.

  Good luck!

• Windows media player will not install due to incompatibility of the language.

  I have windows XP sp3 and when I tried to update my Windows Media Player (WMP), I first installed the wrong language. So I downloaded the English version which indicated to me, due to a mismatch of language, uninstall current WMP to procceed. so I used the utility to Add and Remove program but WMP is to love not the case, so I check in Add / Remove windows components and Windows Media Player. After a reboot, I tried to install WMP and he always says the same thing. What should I do?

  It's OK now. I had to reinstall Windows XP because I got a serious driver problem that is not related to the problem. Also, I just had to be very careful it have the right Installer. Thanks anyway.

• Windows 8.0 does not recognize my CD/DVD IDE or that it is still connected to the computer.

  I ran each troubleshooting I could find, tried several times to have Windows detect the drive and it does not detect. The drive works and is recognized in the Bios but not by Windows. I replaced the reader into thinking that it is defective and it will not recognize the new drive either.  I ran the installation disc that had the drivers and NERO 9.0 as well, but still not CD-ROM.

  I plugged my USB CD-ROM son without problem, it detected it and I was able to load my husbands software with it, but he can keep my son in the car. I had to deal with this for 8 days and I am very frustrated. Also, is there a problem with the controller PCI of Communication Simple. I tried every difficulty, I found, without success.

  You can try the following:

  Windows key + S > type cmd.exe , and then right click on cmd.exe and select 'run as administrator '.

  Then, at the command prompt, type the following (you can copy and paste) and press "enter":

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  Restart the computer.

• Windows live mail does not work next to configuration settings are incorrect, how do I fix see the application event log

  tried to open windows live mail message came on the screen indicating next to configuration are incorrect how this can be corrected

  Hello

  The question you have posted is related to Windows Live Hotmail and would be better suited in the Windows Live Solution Center.

  Alternatively, you can try to uninstall and then reinstall the Windows Live Application.

  How to remove and reinstall Windows Live Essentials

  http://support.Microsoft.com/kb/938275

  Please visit the link below to find a community that will support what ask you

  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hope this information helps.

• is there a way to allow the import of iphone and ipad, but only sync a collection for ipad and iphone not?

  I want to import pictures from my iphone / ipad to lightroom, but only the collections of synchronization on the ipad.  My iphone is 'space challenged' so I do not want to synchronize collections on my iphone, but need to synchronize collections to my ipad to share with clients.  Is it possible or are collections sync'd with all mobile devices in the cloud?

  No, but really, what takes place when you set the edition offline. So activate it on the iPad, leave it disabled on the phone.

• Is there a way to allow the end user to change the font color in a text field?

  I didn't know that LiveCycle existed yesterday so I was using the Google a lot.

  I'm building an application form and asked if there was a way to change the font color in a text field. (EXAMPLE: content Original is black.) The notes are in red)

  I have 2 ideas on that, we should type out and highlight, and then click a button to turn red. The other way. I'm more part. Have a radial affecting when turned off, black types. When on, red types. What is the best way to do it or is it still possible?

  Figured it out. Replace 'plain text' 'rich text' and have user support on ctr + e. seems strange to me, but it works.