Toshiba 32D345Db connection of Smart TV does not work

Similar Questions

• Toshiba 40TL938 - connection Intel Wireless Display does not work

  Hi all

  Recently, I bought a Toshiba 40TL938 TV.

  As far as I understand it's WiDi capable so there WiDi adapter receiver bulit and could function as a wireless display.

  I managed to test the WiDi connection and tried with my portable Leovo T420, who is also capable of WiDi.

  I installed all the updates for gfx and wifi, activated my Wifi addon and installed Intel WiDi application. This is all required and everything went well.

  I've updated the software in my TV for last available via Wifi update (July 2013)

  Unfortunately - no success at all. Laptop is not TV. The TV Setup is quite obvious and sophisticated couldn't do anything there.

  TV is able to connect to my wifi network and see T420 on network (because he sees as DLNA network drive). Computers laptops direct Wifi works well with other devices.

  Is there something I don't understand or hurt? Is TL938 WiDi capable because he has receiver WiDi built in or it is just compatible with external dongles WiDi?

  If the answer is yes then the second question technical specification for this TV is very bad - it's not WiDi enabled TV at all and it is misleading.

  Welcome,
  Tomek

  Hello

  The TV is certainly capable of Intel WiDi.

  You said your Intel driver and tools are p so far, but I would still recommend check update of Intel Support page:
  http://www.Intel.com/p/en_US/support/detect/wireless-display

  Utility the Intel® driver update keeps your system up-to-date. It detects the drivers and software updates related to your computer, and then helps you install them quickly and easily.
  Also visit Intel on [system requirements for the Intel WiDi | http://supportkb.intel.com/wireless/wireless-display/templates/selfservice/intelwidi/#portal/1026/article/2511]

• How to find on which device connected to my system does not work?

  I have XP Professional.  Cannot start Windows Driver Foundation-User Mode Driver Framework(Manages user-mode driver host processes.)  In the window 'services.msc' and try to start Windows Driver Foundation, I get the message: "error 31 - failed to start service. A device attached to the system does not work. "Question: how to find on which device connected to my system does not work?

  1. click on start and then click Run.
  2 type devmgmt.msc in the run box and press ENTER. This will open your device manager.
  3. in the Device Manager window, click view, and then click Show hidden devices
  4. develop options in your device manager and see if there are any device with a yellow exclamation point or something that is rare. If you find one, you can uninstall and reinstall the driver for this device, as long as you have the installation for device drivers files.

  I hope that helps!

• Satellite program-112 P775: HDMI connection to the TV does not work

  Hello

  For some reason that the HDMI connection between my Toshiba Satellite P775 program-112 to LG TV no longer although he did for some time.

  I tried another laptop without problem.

  I posted the same question some time ago and told to press the Fn and F5 keys, but it did not work.

  Any suggestions please?

  You are right: the FN + F5 switches between the internal and external video output.

  What exactly happens when you press FN + F5? A map falsh menu appears on the screen when you use this key combination?

  On the page of the Toshiba UE driver you can find the Manager command HDMI. This driver is required for your HDMI controller.
  In the case where the output to HDMI does not work, try reinstalling the driver

• My works wireless, but my connection to the LAN does not work?

  I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

  Hello

  Sorry I'm not quite clear about the situation.

  You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

  If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  ----------------------------------

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  -------------------------------------

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• (PIV) smart card does not work when users of switcing

  Cannot connect to a system of users by using the switch user or the connection of the credentials to install the software with the PIV card.   PIV card is mandatory on our WAN/LAN.  The PIV card does not work by using the switch user or during the installation of the software as an administrator.  The cure is the reboot and then log in as an administrator, however, you run the risk of the user to lose their jobs...

  Have you contacted the developer of the authentication system of smart card on the problem you are having?

  You should also consider posting your question on the TechNet forum for THIS professional related issues such as this:

  Technet forums - network of Windows 7

• Toshiba 1 TB external HARD drive does not work

  I have a 1 to external drive what cards via usb cable, Ive put a lot of multimedia files on it and have been using it without problems don't have nothing put on for a little while, went to look for some files off it and comes up with usb not recognized, put it in another computer and the light comes done hard disk a rattling for a few seconds then hummes just as if it turns While the light stays on and is not all pulse, on the computer, it emits a sound to say ive plugged the on the bottom, it says safely remove hardware.

  Ive tried on two computers when in my computer it does not record.

  PS im not the tool sharper in the hangar when it come to tech stuff.

  The same problem. I bought edition 2015 last fall. It has a power supply problem (electrical problems). I thought it's because of my laptop. He made her crazy, but SMART was ok. Yesterday, it makes noises again and now it does not work. I saw light blue and only a little sound of pcb as start start. I saw that head of player on the Board.
  It's really a defection from the factory.

• Toshiba LX830 - END/PRTSC Screen Capture does not work

  Hello

  I use a Toshiba LX830 with Windows 8.1.

  The END/PRTSC button on the keyboard does not work, it is the same key on the on-screen keyboard. I'm trying to take screenshots. Various combinations have been tried for example ALT + END/PRTSC, FN + END/PRTSC, FN, CTRL + END/IMPR.

  Nothing is entered for paste in Paint.

  Any help would be appreciated. TIA

  I found the answer: Windows + Fn + PRTSCN

• Toshiba Satellite C55-C1K1 - 10 Windows does not work

  Bought one for my mother and it has been a nightmare. The first was a problem with the keyboard that caused it typing random characters on the screen.

  The replacement worked very well for about two months, now the touchpad has stopped working. I use the touchpad in the BIOS, so I know that is not a hardware failure. Tried all the drivers available, including the MOMENTUM (which shows a CRC problem) on the Toshiba site and nothing would work. Tried reinstall of keeping my files didn't work. Then finally took an image of the disk and installed a full Windows 10 and it STILL does not work.

  So what am I, I wanted to now install Windows 8 on it and see which will work. Why Toshiba push 10 windows on people when they did not ensure that the software and hardware are compatible.

  UPDATE.

  I installed Windows 8 on the laptop, and STILL the touchpad does not work. Finally I found a thread on another site, that said that for another model of C55 - A (similar) of Toshiba, the solution has been updated to BIOS. So I downloaded the latest BIOS update and installed. Restarted after the update, and the touchpad started working again. Restarted a few times and it still worked.

  Finally imaged original return 10 Windows operating system on the hard drive, and the touchpad and F5 (activeent/desactiveent) both work now. Toshiba needs to have a note sent with these laptops or to have a reminder. Two days lost on this nonsense.

• Toshiba STOR. E ALU 2 does not work

  Hello

  My external HARD drive does not work, then I want to place a large file on it (it was a 175GB backup) and now the camera is very slow, I can't copy or replace something, but I can see whats on disc, I can open the files but it takes a long time. I want to just my pictures back, but I can't copy them to another disk. External drives starts whit copies the files, stops and does nothing for the rest of the time. Light flasses almost all the time.

  Forum search virus: nothing
  CHKDSK: ends in front 3 in a critical error.
  disc is not full: about 300GB of 1000
  same problem on different PCs

  I hope someone can help!

  The warranty is still valid?
  I mean, what you want to do with it? You can not force the HDD to work properly.
  In my opinion, you should contact Toshiba service provider and ask for help.

  If the warranty is still valid ask replacement and also ask if they are responsible for your private data backup.

• My drink smart xbox does not work

  My Xbox smartglass does not work someone can help me?

  Hello

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that the Xbox SmartGlass does not work on the computer.

  I suggest you to refer to the links and check if it helps.

  Set up and use SmartGlass on the Xbox 360

  http://support.Xbox.com/en-us/apps/my-Xbox-Live/my-Xbox-Live-requirements

  Install SmartGlass on devices running Windows

  http://support.Xbox.com/en-us/Xbox-360/SmartGlass/SmartGlass-Setup

  Troubleshoot Xbox on your PC Windows 8 applications

  http://support.Xbox.com/en-us/apps/Windows-8/Windows-8-PC-help

  If the problem persists, I suggest you to ask your question in the Xbox Forums. Here is the link for your reference.

  http://forums.Xbox.com/xbox_forums/xbox_support/f/3144.aspx

  If you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• External monitor connected to the Dynadock does not work

  I just bought a docking station universal toshiba dynadock via amazon.com (latest version). I plugged on an Acer Aspire 5738zg computer laptop, Windows 7, 64 bit.
  Everything works great - except for my external monitor (6 months old packard bell viseo 190w, 18.5 inches, max resolution 1366 x 768 at 60 Hz)

  The dynadock manual says connect with monitor dynadock station via a vga cable - what I've done. Job monitor is completely black. The manual says then click the icon in the field of system status / tray (do not know what the word - the small icons at the bottom of the screen on the right screenfor side which) to configure the dynadock to be extended or mirror mode.

  Problem is that the icon does not exist. I have the icon for the audio part of the dynadock and icon for the system whole dynadock (icon called "toshiba dynadock tool" - here I can release the docking for example, but do not do anything on video/screen).

  I checked and the video/screen the dynadock element was installed togheter with everything - the installation was complete and successful. Still no icon if...
  I'm not watching videos or games, just be able to use my external when monitor I surfing online and you use microsoft word etc. - no data transfer gigantic so far as I can tell.

  How to solve this? Via the control panel of my laptop? How...? :-)

  I'd appreciate some advice that I am completely lost as to how to solve this problem (tips preference in the form of a very easy step by step 'manual' as I'm absolutely not an expert in computer science, just a regular user).

  Hi nanna.

  I think that the best way to solve this problem is to download and install the latest graphics driver for the dynadock.
  So please, use this link, download and install the driver.
  http://www.DisplayLink.com/support/downloads.php

  If the external display doesn´t not working after installing the driver, please do a right mouse click on desktop and verify the "screen resolution".
  You should see 2 screens.
  If this is not the case - there is an error during the installation of the utility dynadock.

  In this case, please visit the toshiba page
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp and download the latest dynadock utility.

  Please chosse: Options - connectivity - Docks & replicators - Dynadock

  You will find the version 2.4.0.13

  hope this will help you!

  Best regards

• Connection to Firefox Sync does not work due to "SecurityError: the operation is not secure.

  Hello everyone,

  I wanted to update my Firefox Sync account from the old to the new version. Unfortunately, the login page does not load on my laptop. On my Android devices, everything works fine, so I could already put in place the new account from there, I just can not connect to my new account sync on my laptop. I use Firefox on Windows 8.1 Pro 64 bit 33.1.

  The subject: represents the loading of the landing page as usual, but by clicking on the button connect does not load the login form, just blank white box. I asked my dear friend Google who gave me some answers (seems to be a common problem...), but none of them helped me.

  The debug console displays the error "SecurityError: the operation is not secure" directly after loading on: accounts? action = signin. Opening of https://accounts.firefox.com/signin and https://accounts.firefox.com/signup also results in the same error and an empty box white. https://accounts.Firefox.com/legal/privacy works fine as usual.

  I have not found a solution to work around this SecurityError so far.

  I found another answer which finally solved my problem! Apparently the subject: in the page accounts raise this error because I configured Firefox always ask before accepting a cookie. https://github.com/Mozilla/FXa-content-server/issues/1857

  Even when weird things, but now I have to work around him.

• Toshiba HDD Protection - Shock Sensor Driver does not work with Vista

  I have improved my Tecra M7 for Vista Ultimate last weekend and there are a number of things that do not work. It's very frustrating because I followed the procedures shown on this website diligently upgrade and will have problems.

  Can someone tell me what zip file contains the utility Toshiba HDD Protection shock as I installed everything (except the Config Free because the Zip file seems to be corrupted) and I can't find it anywhere. I noticed that when Vista was recommend the automatic updates after installation it is recommended an updated driver for the HARD disk Protection utility, but is nowhere to be seen and I can't find an installer for anywhere. Does anyone know how to handle this?

  Thank you very much

  Chris

  I don't know if it will help, but try to use the utility disk for Tecra M9 protection.

• Satellite A350 - Toshiba service station for Win 7 does not work

  I'm on a Toshiba A 350 and downloaded Toshiba Servc\ice utility Station for win 7.
  It does not open (even if the admin rights).
  The TsmachInfo service is started in srvices.

  Workarounds or I have to install something more to this work?

  Hello

  As far as I know you have to unpack everything first, and then you will need to run the exe file
  Check this box

  Otherwise it s an OS issue because the exe file should work fine and you should be able to install this tool.

  Welcome them