Windows XP SP3 link down

Similar Questions

• I have windows xp SP3 installed and every time I have shut down the computer and think that his chest away he starts back up?

  I use an ACER Am1201-B1603A 4800 + AMD Anthlon x 2 #gig ddr ram 120 GB windows xp sp3 with all updates...

  Whenever the computer is shutdown with in a few minutes, it restarts.  This is a new installation like 3 days...

  Any help would be appreciated to grealty

  Hello

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  Windows XP restarts when you try to shut down your computer

  http://support.Microsoft.com/kb/311806

  Method 2

  If the previous step fails then I suggest that you check to see if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I am conn

  How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I'm connected to the internet.  The phone option is not available.  When I call Adobe directly, phone mail says that the Director is not supported.  Suggestions?

  Moving to the Director

• Sometimes when I shut down Windows XP - SP3 it just hangs until I pull the power plug.

  When I Shutdown Windows XP - SP3 (w/latest updates) it freezes just until I pull the power plug. I had this problem for some time. Before even the latest updates. This could be the cause of this problem?

  It happened after doing many different things, so I don't think that a particular program might be causing the problem.

  I reinstalled Windows at least twice this year so far and I'm not interested in doing it again.

  I imagine stopping by pulling out the plug could cause problems for Windows in the future.

  TKOP,

  Your problem may be hardware related or associated software. I have seen this with Mcafee installed on workstations and eventually found that memory has caused the problem.
  The simplest and the least expensive would be to replace the memory modules and uninstall Mcafee. (you can google must uninstall mcafee to obtain an uninstall program) If this does not help, check the operation of the fans on the unit. If they don't keep the processor cool laptop, they must be replaced. You may be able to check the time of fan in the bios.
  You can also check the Windows event log to see if there is any information to software problems.
  Worst cases would be the power supply or the motherboard are the cause of the problem, you could get a diagnostic software from the manufacturer of your computer to check maybe it.

  Or run it to test your memory on your computer.
  http://oca.Microsoft.com/en/mtinst.exe please rate me upward if you find my post helpful. Thank you!

• Windows XP SP3 system crashes when you unplug the USB device

  the user has a laptop Dell Latitude D630 under Windows XP SP3.  In the last 2 weeks, the laptop started to hang when it unplug a USB device.  Click on the system tray icon to remove the device but the system gives breaks down.  That's all the info I have at this point.  What should I look for?  Does anyone have ideas on how to solve?  Thank you.

  How to crash the system?

  What is a blue screen crash?

  If so, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• RE: WINDOWS XP SP3 of queries sent October 2, 2010 dear Sir,

  RE: Queries WINDOWS XP SP3
  Envoy on October 2, 2010
  Dear Sir.
  We just installed Service Pack 3.  Now several changes
  have taken place, we want to reverse.
  1. all records have the beginning with FILE menu command
  FIND the best choice (in bold).  That means ENTER key opens
  Search, not the file directly.  We have our own system of
  storage file in subdirecories and do not want to use
  'My documents', "myComp" and other stupid names.  How can do us
  OPEN as the first choice?
  2. when to use CTRL + F to search for a name of text inside file
  a file, the window opens in the same position as the record
  to be examined.  It also closes this folder later.
  How can we have RESEARCH to appear as a separate window, while
  NO previous windows closed?
  3. the default icon for folders is a Manila folder with
  a lot of very small bunk symbols.  How can we define the
  default to a folder empty manilla everywhere?  The
  "applies to subsequent records" does not work.
  4. some record fields (columns) appear very light
  colour, white and tinted white.  This is a nice feature
  We want to use, but it is difficult to distinguish no difference.
  How can we make the differential color stronger?
  5. for the connection of an external hard drive, it automatically
  "autoplays" and a menu comes to "choose action".  We
  Oly use it to back up = data.  How can this unwanted wizardly
  assistance to shut up?
  6. in the browser, the message "Intranet settings are now".
  turned off... "appears every time and takes another bar
  across the width of the screen.  How can we delete this
  message permanently?  We have no Intranet connection.
  7. when clicking a *.pdf file suddenly the first order
  in the menu file is replaced by "open with Adobe Reader 9.
  How can I remove this annoying interference and simply do not have
  'open' option at the top of the page?
  8. from time to time, we record our voices using Microsoft «»
  Tape worm 5.1 SP3 "and headphone\mike together.  But the
  micro alive all the time 24/7.  Where can we find a
  button to turn off the microphone?
  9. in case of a 'research' reviews movies automatically to
  large icons, while we only use the format of "details".  How can-
  avoid us this constantly and everywhere?
  10. in opening the files, there is a subtle broken white color
  several fields of details.  It is strange that not the same
  fields have the same color.  While the colored backgrounds are
  attractive, we would lke more control and stronger colors.
  How we handle this view
  ?
  11. two of my folders have fonts colours blue and yellow, all
  others are in black.  Seems to have no control over that.
  How can I change the font color of the names of files and folders
  ?
  12. When you change the folder icon, it records as a new date
  changed, but no data is changed.  We now *.htm and
  their associates * _files on different dates. How can-
  We store the last modified date when data are
  in fact, only edited?
  13. in EXCEL3000, when two cells are merged in the two lines
  and the alignment of the text is located in the 'Center' then the other
  individual cells along these two lines, all texts are centered
  (including the number of line along the left border) and cannot be
  moved to the 'low' or 'top '.  How can we remove all «»
  alignment of the line '?
  14. in EXCEL3000, the cells seem to have a very slight tint
  (off-white) as the color field.  In edit mode, they turn
  more bright white, includng all other cells that have been
  recalculated after change data in a related cell.
  This lasts until the screen is refreshed.  This only happens
  in some sheets in the same workbook, but no color change
  in the other sheets.  How this attractive feature can be
  controlled in all sheets and how color can be set to one
  stronger tint?
  15. in EXCEL3000, the appearance of color of a spreadsheet is
  controlled by the definition of the location of the color
  palette.  But this can be changed arbitrarily by the user and
  isn't it the same in other versions of EXCEL.  How can we be
  certain that a proposed color actually appears even if
  the file is viewed by another user, or on another computer?
  16. in Internet Explorer v8, when downloading files from
  Internet, the meter on the bottom left starts to
  "Download (1.32 MB 6.35 KB): http://www...". "but then
  freezes and does not increment until the product for download.
  Sometimes it freezes at other values.  Fact that occasionally
  the counter advance at a rate set at full value.
  If it is a bug, can it be fixed?  If it requires an action,
  What do we do
  ?  When the whole numbers are displayed, the two
  decimal places are disappearing.  It is good scientific practice
  ALWAYS show the degree of accuracy, being two decimal places,
  including the zeros.  The mixture of display KB and MB in the
  same statement is NOT good scientific practice.  All units
  must be the same.  To display two decimals in kilobytes
  is insignificant and meaningless.  It would be preferable to view only the
  Megabytes, then to THREE decimal places to take account of
  Kilobytes.
  17. in EXCEL3000, using forms automatic drawing compounding
  several surfaces that overlap, the command "go to the front" and
  "go to the rear for" works well.  But the option 'down' and 'go '.
  superior"do not seem to work.  There is no way to find out
  in which order the drawing folios are stacked.  What makes
  the shading of unpredictable stacked surfaces.
  18. in WORD3000, the cursor blinking on the insert is sometimes
  very short, less than half of a strong letter.  Other times it is
  all the way up.  He's still very thin and not easy to see.
  How that can be controlled
  ?
  19. under WIN - XP, using "save under" a file name can be suggested
  or a new typed in.  By then changing the subdirectory,
  Sometimes the name turns into an existing file,
  already highlighted in this new subfolder.  Expected not
  This change, pressing "enter" of the old file is overwritten
  and its lost data.  How can it be avoided in all cases?
  20. in start the computer, it always displays a message
  "Cannot open the scanner program.  But I do not use a scanner.
  How this message got there and how to stop
  appearing in the future?
  21 when a folder is renamed, its 'Date Modified' passes to
  today.  But all subfolders automatically change their
  "Date of creation" in today.  It is a significant loss of integrety
  all of the files involved.  How this can be fixed or
  prevented from happening again?
  22. when a case is its icon has changed, the research"(CTRL + F)
  present the old icon.  How can we make the icon of a file
  the same appear everywhere wherever it is displayed?
  23. How can I make the sound composition, as the numbering mode
  beeps?
  Thank you Joe Baxter

  Hey, Joe Baxter,

  I suggest you to visit the following links to learn how to work with files and folders in Windows XP.

  What's new with files and folders?

  File and folder management overview

  How to search for files and folders in Windows XP

  How to arrange files using folder views in Windows XP

  I suggest you to create the new thread for each issue with title and category to give you the best solution.

  I suggest you to consult the following link to know how to ask the question in the forum.

  How to ask a question

  For problems with Office applications, I suggest you post on the following link.

  http://answers.Microsoft.com/en-us/Office/Forum

• Error code: 0x24002D Windows XP SP3 installation

  Original title: this error code is displayed when you try to update xp SP3 - someone ' can someone help please. ?

  I've sorted a problem installing Windows Installer, which seems to have reduced my problem of updates to-not being able to update XP SERVICE PACK 3.    Error code is 0x24002D

  Hi Doreen47,

  1. did you try to install SP3 manually?

  Method 1:

  You can read the following article and try to reset the Windows Update components and check if you can install SP3.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  If you're still having problems, then you can try to download and install the stand-alone package for Windows XP SP3 and check.

  See the link to down load and install the update manually:

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Also read the following article:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  Hope this information is useful.

• Problems on Mac OX 10.6 V.S. Windows XP SP3

  Hi all

  I have a problem with my MacBook Pro.

  My system is Mac OX 10.6, but I use BootCamp to 10.6 to implement the portable Windows XP SP3 on the same computer. Then I put in place LabVIEW 8.5.1 on Windows XP system and use Agilent 823578 USB/GPIB Interfaces to communicate with locking SR830 amplifier.

  When you use Angilent connection Expert, I could communicate with SR830 by Agilent 823578 USB/GPIB Interfaces. However I couldn't use relative visa in LabVIEW command, such as opening VISA, to connect with SR830.

  On the other hand, I use the same program on the DELL Windows PC to communicate with SR830 without any problem.

  So I was wondering is it a problem of compatibility of MacBook Pro and Mac OX 10.6 with Driver of instruments?

  I will be appreciated if someone could help me to solve my problem. Thanks to you all.

  First, you must enable support for Tulip so that MAX recognizes the controller of agilent. In MAX, you select NI-VISA under the software section. Click on the visa, and then under MySystems Options > General settings, select passports. Check the box for NiVisaTulip.dll. If you do a view > refresh, the controller must be included so that you might have to restart. When MAX lists the agilent controller, you should be able to scan for instruments. It's what will update the visaconf.ini file.

  I'll sort of memory on it and have only done on windows pc. I don't really know if there are problems with it under a virtual machine on the Mac. There are numerous links on tips related to the use of controllers of agilent with LabVIEW so you can do a search to see if I missed the details.

• My Office Windows XP SP3 has been "glued" on stop, installation of update 6 of 12 for 15 hours and counting.

  My Office Windows XP SP3 has been "glued" on stop, installation of update 6 of 12 for 15 hours and counting.  I'm worried to turn it off because I don't want any major problems if it works again.

  Can someone please advise on what I have to do to go even faster.

  Thanks for any advice in the meantime.

  As a result of the survey above.  I 'bit the bullet"and shut down the computer and no damage seems to have been made.

  Time will tell I suppose.  Thank you

• Counter strike 1.6 does not work on windows xp sp3

  Counter strike 1.6 installs on windows xp sp3 but breaks down so that the opening match and return to the windows desktop.

  Hi pinoyvfx,

  Welcome to the Microsoft Answers site!

  a. He worked before on your computer?
  have b. you made changes recently?
  c. do you get error message when your computer breaks down?

  The most common cause of this problem is damaged or outdated video card drivers. Please make sure that your video card drivers are up to date.
  You can also consider to reinstall the drivers for your video card if the game has worked previously on the same hardware you use now.

  Also uninstall and reinstall cs strike and check if it helps.

  Resources for troubleshooting problems in Windows XP:

  http://support.Microsoft.com/kb/307960

  Kind regards
  Amal - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download Windows XP SP3 home edition

  I'm trying to download the Windows XP SP3 home edition.

  So I go to this page: https://technet.microsoft.com/en-us/windows/windows-xp-service-pack-3.aspx

  And I click on the link titled "Stand Alone Version" - here is the link https://www.microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4

  And I get this message from the Microsoft web site: "we're sorry, the page you requested could not be found."

  Can someone direct me to a link to download the standalone version of the service pack work?

  MS has removed most of the downloads for XP. However, they are still available from catalog update (must use IE to use the update catalog).

  Here's SP3...

  http://download.windowsupdate.com/msdownload/Update/Software/dflt/2008/04/WindowsXP-KB936929-SP3-x86-enu_c81472f7eeea2eca421e116cd4c03e2300ebfde4.exe

• Error message trying to update Windows xp sp3

  I just do a fresh install of windows Xp sp3 replacement, that I got from Microsoft. I tried to update to windows, as I do when I reinstall windows and got the error message "the site has encountered a problem and cannot display the page you are trying to view. This is the first time I met it with this drive. Usually, this is no problem at all. I tried to go through various corrections on this site but there are several and I think I did more harm than good. I just reinstalled windows again, try to update and received the same error message.

  I hope that someone can walk me through this time and end up with the right solution.

  I just do a fresh install of windows Xp sp3 replacement, that I got from Microsoft. I tried to update to windows, as I do when I reinstall windows and got the error message "the site has encountered a problem and cannot display the page you are trying to view. This is the first time I met it with this drive. Usually, this is no problem at all. I tried to go through various corrections on this site but there are several and I think I did more harm than good. I just reinstalled windows again, try to update and received the same error message.

  I hope that someone can walk me through this time and end up with the right solution.

  [1] turn Off automatic updates and leave it off.  Disable the notification of screen nag is a problem to have automatic updates off the coast.

  If you have not installed IE8, IE8 install using the exe to install full version offline and the decline of downloading updates.

  [2] when you have Win XP SP3 and IE8, it will be a necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  Install this update and then RESTART the computer before moving on to Windows Update.

  This should eliminate a known problem that manifested by blocking windows update to do research without end and CPU at 100%, what is happening unless the most recent monthly cumulative IE security update is already manually downloaded and installed.  Second Tuesday of each month, this will be a ritual to perform or windows update crashes.  This is caused by a problem with the site Web of windows update is not a problem with your computer. Microsoft is committed to solve the problem which has continued for months.  Promises, promises.  The genesis of the issue took place in the summer 2013 and has been reported in this community after the updates of August, when it was reported that the last cumulative update of security for September KB2870699 be downloaded and installed manually set the CPU of fortification to Windows Update.  The linked thread shows this being reported in September and a month the well-known universal question went from bad to worse, with the installation of the updated cumulative security for IE being the fix manually.  The problem has been compounded by a bad Microsoft Fix it tool that was linked by Microsoft as the fix for Windows Update problems, but the difficulty bad it tool would then instantly to corrupt the registry of a computer of the user and cause an additional problem that would make the BITS and the two stop work, worsening the problem instead of fix windows update problem.  971058 is the famous set and there are other iterations that have the same bad code and cause the corruption of the same register.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/automatic-updates-and-Svchost-100-CPU/0715db9f-01e0-484f-87ea-10eff88a3e2d?page=1

  The linked TechNet page

  http://TechNet.Microsoft.com/en-us/security/dn481339

  will give you a link to most recent monthly cumulative security for internet explore that you must manually download and install before you will not be able to access windows update

  https://TechNet.Microsoft.com/en-us/security/bulletin/MS13-097 is this month December 10

  Select the download that is necessary for your version of Internet Explorer and download and install it and restart your computer before you visit Windows Update to get other updates which will then become accessible, after the prior cumulative IE security update is downloaded and installed MANUALLY and the computer is RESTARTED.

  The steps above should solve the more obvious and certain to problem. However, there are two other known problems that may also arise and are common questions of interest as the extra aggravation.  The first issue is certain and the other 2 issues can also either or both be also present in the form of a complication.

  It often happens that the installation of SP3 will break the windows update feature by not properly installing the windows update agent.  An older version of the windows update agent can be downloaded and saved in the C directory and installed by an execution command.

  http://download.windowsupdate.com/v7/WindowsUpdate/redist/standalone/WindowsUpdateAgent30-x86.exe

  Update: a later version of windows update agent is available during one of these linked pages

  http://support.Microsoft.com/kb/943144

  http://support.Microsoft.com/kb/946928

  Start > run > C:\WindowsUpdateAgent30-x86.exe /wuforce

  Steps 1-4 or 5-8 alternatively should solve the problem with the windows update agent.

  http://www.ehow.com/how_7176381_microsoft-install-after-installing-SP3.html

  Here is an associated KB article which does not have the entire article on the causes

  http://support.Microsoft.com/kb/927891/en

  Another article linked here shows this is not a new issue, but has been perennial

  http://blogs.technet.com/b/asiasupp/archive/2007/05/29/automatic-update-causes-Svchost-exe-high-CPU.aspx

  To connect to Windows Update the old version of Windows update agent detects installed and the latest version will be installed after consenting to the ActiveX installation.

  If this does not resolve the problem with Windows Update, then troubleshooting must then attend an essential required service BITS called which may be dysfunctional and causing the problem.

  See this thread and response noted the response of Xircal.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/win-XP-Pro-SP3-update-does-not-start/a583105f-6a52-4d69-94ee-6fc3e2da3c8a

  BITS is a necessary process that was recently discovered to have been broken on many computers by a faulty Microsoft Fix it troubleshooting and repair tool.  Fix defective it also caused users of computers for months and the same programming coding error can exist in others not yet identified software provided by Microsoft.  A registry fix has been designed with this problem by a member of this community.

  http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/bits-error-1290-0x50a-following-updates/9457b57d-1cb4-49f8-b62b-7fc8b226ecca?page=7&msgId=3eda6593-d29b-4173-aa24-77838e21739a

  This is one of the many reported uses of third party 'repair utilities' successful

  http://www.philmorgan.NET/techie-tools/Windows-Update-bits-Background-Intelligent-Transfer-service-fix-batch-file-for-Windows-XP

  Here's another

  http://www.tweaking.com/content/page/windows_repair_all_in_one.html

• How can I download and install Windows XP SP3?

  I currently have Windows XP, Service Pack 2 on my IBM ThinkPad.

  I tried to follow the instructions on the Microsoft Web site, which is to install through Windows Update. When I go to the Windows Update page and click on the "Custom" button, it says "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "[Error number: 0 x 80244019]

  I suspect it is because I am currently running Windows XP SP2; I'm not allowed to update because I have not yet updated.

  The second 'Advanced' option is to install 'manually '. This takes me to a page titled "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers. The title is a bit disheartening, but I was going to get anyway, but when I sailed to the bottom of the page, I read in the description: "DO NOT click DOWNLOAD if YOU ARE UPDATING a SINGLE computer. I can't just ignore a message written in all caps and bold!

  In any case, could someone tell me why

  1. The updated release of Windows XP SP3 is, in terms of Microsoft, "more appropriate", and
  2. If it is not appropriate for my single installation on my ThinkPad user, so what do I do?

  Thank you

  Thomas

  You can download the stand-alone package for Windows XP SP3 from the following page on the Microsoft Download Center. Although this page shows that the installation package is intended for it professionals and developers, you can download and then install this package.

  

  Download the Windows XP Service Pack 3 package now

           

  Important These service packs apply only to 32-bit versions of Windows XP.

  To order Windows XP SP3 on a CD, click the link for your region:

  Asia     (except in the Japan)

  Europe and Africa

       
  North America

  South America

   

  Ref: How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

• Cannot download or upgrade to Windows XP SP3... HELP Please

  I have Windows XP with Service Pack 2.0 is installed.  I tried several times (in vain) to upgrade to Windows XP Service Pack 3.  I went to the Windows Update site and continue to receive an error.  I have downloaded and run the FixIt, but in vain.  How the hell can I fix this to get the update?

  You're donloading it from this link? :

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

• Computer sees no floppy and CD Rom/DVD player after change of motherboard of PC w / Windows XP SP3

  After changing the motherboard on my PC, a Dell Optiplex gx270s Windows XP SP3, the computer (which also works fine) does not see the CD/DVD or floppy drives CD, DVD or floppy is inserted. (He sees not thumb drives). When I look under the hardware in the system, the floppy drive and the Cd-Rom are marked as +. All appropriate updates had been installed. These discs worked fine before the motherboard was changed. (It was done because the capacitors were bulging.)

  What could be the problem and how to fix it?

  Please explain simply, that I'm not a computer expert.

  Thank you in advance.

  Hi 4Sunnydays,

  Welcome to the Microsoft community. According to the description of the problem, CD/DVD and floppy drive is missing.

  ·         You get the error message?

  I suggest you to follow the steps in the article and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  I hope this helps. Let us know if you need more assistance.

  Thank you.