SCXI 1180 not detected and not ListBox!

Similar Questions

• 15 - ac130nia: my wifi and bluetooth is still not detectable and can also discover other wireless networks

  My WiFi and Bluetooth is still not detectable and can not find other wireless networks

  @Pelumi10Hi

  Thank you for visiting the Forums from HP Support. It's a great site for information and questions. I read your post on wireless and Bluetooth connections are not always detectable not. I'm happy to help with this problem!

  I would need more information about this to help you better.

  • It has never worked before?
  • When the problem happened everything first?
  • You did the hardware changes as obtain replaced Wi - Fi?

  Please follow these steps and check out these links to try to solve the problem.

  1. Turn on your Bluetooth device and make it discoverable. The way that make you it discoverable depends on the device. ...
  2. Click Start > type Bluetooth > Select Bluetooth settings in the list.
  3. Activate Bluetooth > select device > pair.
  4. Follow all the instructions if they appear.

  Open windows control panel, open Power Options and next to your currently selected power plan, click Change plan.  In the next window, click on change advanced power settings.  In the next window, open 'wireless adapter settings' and then open 'power saving Mode'.  Next to on battery: click on the current setting and a drop down menu will appear - select 'Maximum Performance '.  Do the same for the sector.  Then click on apply and then Ok to save the settings.

  Restart the computer and see if this contributed to the issue.

  Also open Device Manager. Go to the network adapters and expand it. Select the network adapter for your device by clicking right on wireless and click Properties. Then go to the power management option and uncheck the box that says" allow the computer to turn off this device to save power. In addition, check the box that says "Allow this device to wake the computer"

  Please visit this link to solve the problems of Wi - Fi: http://support.hp.com/in-en/document/c03535285

  There's a video associated with the problems of Wi - Fi in the link.

  You can also check these links:

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/WiFi-connectivity-problem-in-Windows-8-1/TD-p/3951390

  http://support.HP.com/us-en/product/HP-15-notebook-PC-series/8499326/model/8942890/document/c04800801/

  To resolve Bluetooth issues problems please visit these links:

  http://support.HP.com/us-en/document/c03429630

  http://support.HP.com/us-en/document/c01060335

  To simply say thank you, please click the "Thumbs Up" button for appreciate my efforts. If this solves the problem, Please mark this "accepted solution". If you need more assistance let me know and I will gladly do whatever I can to help.

  Thank you and have a blessed week ahead!

• Trying to send emails through my scanner/printer and my window that educated told me that program file could not be installed or to load and go to the Help menu under 'detect and repair '?

  through my scanner/printer and my educated place window tells me that program file could not be installed or to load and go to the Help menu under 'detect and repair '? I need help with this

  Hello

  you say not what e-mail program, you use!

  It takes a lot more information

  ______________________________________________

  see if this applies:

  Looks like you need configure Windows Mail

  you need to configure your e-mail account windows mail with your ISP internet service provider

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• Is there a driver for webcam to youcam 3 because mine is not detected and yet it's built in webcam

  Is there a driver for webcam to youcam 3 because mine is not detected and yet it's built in webcam. How is it fixed?

  See the answer to the Q even posted by you on the 21

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• Displayport ENVY causes battery lose detection and performance max brightness

  I have a HP ENVY 17 - 3D was released in early 2012, running Windows 7.

  It has 1 HDMI port and 2 additional display ports. The graphics card is ATI HD 7690 M XT and supports switchable graphics on the fly.

  The processor chip is 2nd generation Intel Quad Core i7.

  Problem

  When I use the displayport cable "Displayport to DVI" connector active, my battery would not be detected, and the brightness of the computer screen laptop builtin automatically tops out at 100%, without the possibility of reducing its brightness in my custom settings powerplan (100% light is bright for me). I recently started to use the displayport to send video clips as extended desktop to an old monitor LCD of Sony, which has instead of the latest HDMI DVI. The HDMI port has now been connected to the flat screen TV. Even if I converted the portable/DVI on the old Sony HDMI signal, and only a monstercable adapter-nothing fancy, I never lost the features. This started to happen when I started using the display port...

  However, as soon as I return to the HDMI output that is unique to all monitors, my battery is still visible, and I can adjust the brightness of the screen through my powerplan again...

  This problem is only apparent when I use display port...

  Finally, the catalyst software is the original that came with the machine I can't update this because nothing else apparently takes in charge the switchable graphics and have had bad luck with the newer versions... If I'm wrong please let me know...

  What I try to do

  Very simply, the laptop's HDMI port will connect directly to a TV dish 1080 p SAMSUNG. This image is simply a mirror of the laptops display, which is also the same resolution - 1080 p. The old Sony monitor simply connects to the Displayport now via an active adapter 'Displayport - to - DVI' to use the extended desktop.

  Overall, it's just 1 screen flat TV cloned/updates mirrored on the laptops display in the same resolution (1080 p), and 1 smaller screen for the range of extended desktop. So 3 screens are light in total:

  Laptop + SAMSUNG TV via HDMI direct (in mirror and identical - the two 1080 p resolution)

  Monitor Sony via displayport using '-Displayport to DVI-' active adapter.

  Everything else works fine - I just lost my battery and the ability to control my screen brightness, which is huge for us with power outages and have reduced the brightness...

  If anyone has had this problem and what should I do?

  Any help appreciated...

  Thank you very much

  GIO

  Hi @GGHP2016,

  Thank you for the update.

  If you remove the battery and always start your laptop, you can use your laptop without the battery.  If you leave the battery installed you can still use it on current alternative.

  Please contact HP shopping for help in purchasing the correct battery. 1 800 hp direct (800-473-4732).

  Please let me know the results.

  Good luck!

• Satellite L40 - 14N: problem has been detected and windows has been shut down

  Help.

  My laptop worked perfectly well until my son used last night and went on various games.
  Since then when you turn it on, it is a blue screen that says: "a problem has been detected and windows has shut down to prevent damage to your computer.

  He said that he has downloaded something or added a new hardware or software.
  So, off it and tried.
  Have tried everything to make it work. tried to get into F8 and F12.

  Tried from the safe mode and the recovery disc tried following all the resulting instructions always blue screen.
  Not knowing what else to do. I have

  s he Knackared now?

  As I got the BSOD appears also after the use of the disk recovery and after a fresh install of the OS.
  Is this right?

  Unfortunately, buddy, but sounds more like a hardware problem as a problem related to sound.

  I would contact a technician for laptop and organize an audit of the material.

• "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

  Hello!

  For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

  It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

  My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

  Here are more details, where they can help in the diagnosis of my problem:

  • ID of the system board: 30BB
  • Type of processor: Genuine Intel(r) CPU T2250
  • Processor speed: 1730 MHz
  • Total memory: 1024 MB
  • Video memory up to: 128 MB
  • BIOS version: F.06

  Here's the entire message to the blue screen:
  - - - - - - - - - - - - - - - - - - - -
  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
  - - - - - - - - - - - - - - - - - - - -

  I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

  Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

  With great appreciation for your time,.
  Damaya

  Quick suggestion

  Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
  Good luck

• Can I detect and handle an event already within a structure of the event?

  I have a VI that would do what I want, if I could detect and handle an event of second mouse click while I'm already handling a previous event (selection from popup menu).

  I hope that the picture is clear, but in words what I want is the following: I have first right-click on a chart and select a context menu item, which specifies a graphic manipulation of properties.  Often, this manipulation requires clicking on a second graph to get a reference (for example if I want to copy some of the properties of the first chart on the chart of the target).  It is, it means I'm trying to detect a second event already within a structure of the event.

  I think I could do with a state machine and some registers at offset, and if it's the easiest way, I'll do it.  I would be interested to know whether, if there is a way to detect and manage events 'nested' as I suggested.

  Thank you!

  Your code is not really that complicated.

  Yet, the problem is that confuse you it upward with the main state machine. I would use it in a small parallel loop that only manages events associated with the menu shortcuts. All this should be able to run in parallel in any event, even if the main loop updates the data in the chart at the same time, for example.

  I don't like the dialog box, it hampers the flow of work, but if you use it, use two button dialog so that the user can also cancel if necessary. Instead of the dialog box, you should just temporarily move the cursor on. I also do little to check before operating on the second graph of reason and give a time limit for the second operation.

  Here is a quick project to a more atomic shortcuts Manager. Modify if needed. There are probably bugs.

• When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

  Original title: when I turn on the computer.

  the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

  Hi Cjdaniello,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• Helps detect and block repeated RDP has no connections

  I wonder if anyone has found a way to detect (and then effectivly block) repeated failed RDP tries to connect.  I guess it's difficult because they are legitimate connection attempts that we don't normally block.  Run us several terminal servers and (correlated with new RDP according to virus recently announced) that we have seen of many attmepts login failed via RDP over the past months.

  I found a similar question that did not have a clear answer.  Anyone know how to set up a detection of flooding for repeated RDP connections?

  https://supportforums.Cisco.com/message/3365703#3365703

  I would like to find a way to block repeated attempts, but not to block all attempts, I need to keep the other source IPs unblocked the blocking mechanism.

  Erick

  You can try a signature of engine aotmic IP which is on port 3389. You can set the County event to the aggressor and the victim address pair and event the number to a decent amount (say 5) and a count interval to an appropriate interval event (say 30 seconds).

  You can also match on additional details (like a RST flag as well in the header of theTCP which ideally should follow a connection attempt has failed). If you do this, you specify the source TCP 3389 port and also activate swap victim-perpetrator addresses so that the destination IP address is detected as an aggressor.

  You can then set the action to "refuse the perpetrator victim pair inline" and all the traffic between these 2 guys will be blocked for a period of time (the default is 30 miniutes if I remember correct).

  Indeed, the signature will try to match 5 TCP packets in 30 seconds with a source port of 3389 and between the same set of IP addresses. If this condition is, it stops all traffic between these 2 hosts for a set period of time.

  Yet once, the numbers I mentioned above may not meet your requirement. You should maybe start wireshark and see the boss and match accordingly.

  I hope this helps!

  Kind regards

  Assia

• network computer detects and installs but won't print on shared printer

  I have a HP C4680 hooked to my beta Win 7 Ultimate 32 bit version office running with a USB cable.  I have an Asus EEE netbook running than Win 7 Ultimate 32 bit Retail Version.  It detects and prints on the thin printer on the network.  I have a laptop HP slot as Windows 7 Home Premium 64 bit Retail Version.  When I add printer and select network it finds connected to the desktop computer and goes through the installation, but it will not print to it.  It is as if it were the case.  There are no errors, but does never print anything.

  Any suggestions as to why does not print just a computer?

  Thank you

  In the case where someone else faces ever I think that the problem has to do with a 64-bit computer, I try to print to the 32-bit computer.  There was a bizarre behavior last night.  He would print document a specific word, but nothing else.

  After some additional research I found two things to try.  I've done both, so I'm not the one who fixed it for sure, but everything works fine now.

  First, I installed the printer drivers 64-bit on the desktop hosting the printer.  Then click on update driver for the printer from the laptop 64 bit.

  The next step, I took suggested that set the permissions of folder windows/system32/spool to everyone on the host computer, I saw.

  After doing these all works very well, and my wife is happy, that it can print.