Windows xp sp3 sometimes will take care in or out of safe mode

Similar Questions

• window repair virus won't let me not even run in safe mode system restore.

  original title: window repair virus won't let me not even run in safe mode system restore.  What should I do now?

  Research on the web.  Not far from the computer.  Computer is speaking.  Windows repair itself downloaded to my computer XP Prof  Apparently erased all programs, all about office except explore and recycle bin.  Computer restarted in safe mode to do a system restore to an earlier date to wipe clear out of the memory of the computer.  Has started the system restore, you click on a date, click, hourglass and then nothing.  No message, nothing.  Click Next again and still nothing.  Download Security Essentials.  Took several attempts so that it can be updated.  Computer turns off.  EU Security Essentials uninstall and reinstall.  Finally updated.  I hope this works!

  Hi, John. I had to deal with this virus of the Windows repair. I have had pretty good luck (fingers crossed anyway) by using the removal guide posted on bleepingcomputer.com.

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-repair

  They have a program called rkill download that stops all the running processes. Allows you to prevent the virus from Windows repair. It will give you a file log and show you things that stop you. Write those down.

  I had the same problem you had with not be able to update Malwarebytes. I would like to run rkill, run Malwarebytes, and then reboot and repair Windows would jump to the top. On the third try, I didn't restart after running rkill and Malwarebytes. Instead, I searched for the files that rkill to stop (and I wrote down) and remove them manually from the C drive. Also, I have downloaded and run CCleaner which has removed registry now dead keys associated with the repair of Windows virus in the registry.

  CCleaner: http://www.piriform.com/ccleaner

  Then I rebooted. That seemed to do the trick: I was able to update Malwarebytes again. I ran the program display offers the site computer network, and which unhid all files that was hiding the Windows repair virus.

  Again seems to work... thought it might be of help to you as well! Good luck!

• Hi I seem to be unable to get out of safe mode, I think I may have wrong bios config I tried the default settings. When I turn off computer sometimes a blue screne flases__

  I can't get out of safe mode, I think I messed up in the Woods, that a blue screen also flashes when I restart

  For ANY BIOS problems, contact your computer or the manufacturer of the motherboard.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Table of contents > Vista:

  This link is to enter; Follow the tips below to get by:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     UNCHECK the box labeled Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• I'm having troble getting out of safe mode, I tried restarting and fixing of the window but won't get out of safe mode.

  I tried my computer out of safe mode so many way, I'm losing it I get this close to throw my computer (-).

  It does not help if you say people here than you have ever tried!

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode without failure. For reasons that why you should read this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     UNCHECK the box labeled Start secure

  6. Press the apply button and then press the OK button.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows XP SP3 installation will erase the data on the computer?

  original title: if I change my windows xp sp2 to windows xp sp3, the data of my other drives (D:, E: and F :) will get deleted? what should I back up these data?)

  I currently have Windows xp sp2. I want to switch to windows xp sp3 install some software. During the installation of Windows xp sp3, the data from the rest of my readers (D:, E:, F :) will remain intact or will be deleted?)  what I need to save all that data?

  They should not be made, but if you have 3 other physical disks I would disconnect the data cable for each disk to be sure.

  Also would be wise to create a backup of the Image of your disk/partition of Windows XP before installing SP3 just in case there are problems.

  Acronis True Image 2011 - has a fully functional trial version of 30 days available.
  (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
  http://www.Acronis.com/homecomputing/products/TrueImage/
  The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
  True Image User Guides and documentation:
  http://www.Acronis.com/homecomputing/download/docs/

  Free alternative:
  EASEUS Todo Backup home V2
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  http://www.TODO-backup.com/

  J W Stuart: http://www.pagestart.com

• After back to Windows 7 from Windows 10, my Windows will not load and everything freezes in safe mode.

  Original title: backup Windows 10 for windows 7

  Hello

  can someone help me please. We have recently upgraded to Windows 10 but didn't like it. Having had the opportunity to go back to Windows 7, I did. Now Windows does not load. When I run the system repair, it works and when you scroll the dialogue it passes all the tests, but said a patch prevents starting windows.

  I tried to go into safe mode, but all crashes and I do not have a slider and it goes to a screen saver.

  I have limited computer please not too technical answers, if you want to see something then please explain to me how do.

  Best regards in anticipation.

  Valo

  Hello

  Thank you for contacting Microsoft Community

  I understand that you are facing the problem with win 10 in SafeMode as normal mode

  Please answer these questions to better understand the issue and help you:

  1. You have the disc of windows 7 installation?

  I want to suggest everything first, disconnect any external devices (Cd/DVD, USB key, webcam, memory card reader, etc.), except the mouse and keyboard and try to start.

  Now press Ctrl + Shift + ESC key combination to check if the Task Manager opens.

  If you have the Windows 7 installation disc, try to run the Startup Repair tool once more with the disc.

  If this does not help, get in safe mode with command prompt and use startup recovery tool to repair windows startup problems

  https://support.Microsoft.com/en-us/KB/927392

  Hope this helps

  Thank you

  Amplifier. Mayank Chadha

• I built a new system. Transferred to the hard drive and video card, but everything else is new. Restart Windows as it begins to start. I can get into safe mode and found event id 7026 and event id 7001 in the event viewer.

  As mentioned above, this is a new system, but with a more older IDE hard drive with windows xp pack 2 service (I think). When you first start, it says that windows is not stopped correctly and asks me to choose whether to start it normally or without failure or last known working configuration. When I choose to start windows normally, it will load up to a point. The screen of Windows Xp will come with the slide bar. It will then restart. When I choose to start in safe mode, a bunch of 32 file system scrolls upwards on the screen. I don't remember if it of normal or not. He takes over in SafeMode but. I went to the event viewer and got the following errors.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7026

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The next (s) starting or starting system could not load:

  AFD

  Avgldx86

  AvgMfx86

  Avgtdix

  FIPS

  IPSec

  MRxSmb

  NetBIOS

  NetBT

  Processor

  Rdbss

  Rdbss

  Tcpip

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The IPSEC Services service depends on the IPSEC driver service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The Hello Service service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  TCP/IP NetBIOS assistance service depends on the AFD service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  I did find something online that contains all the system boot or start specific drivers. Windows and harddrive was working in another computer just before he was switched. Let me know if you need other information.

  Thank you.

  First of all you are missing probably a number of device drivers, particularly the network card driver and the driver of the motherboard.  Use your XP disk to perform a repair installation.  This should go a long way toward you're going to get.  If your new box has a driver disc that should help a lot.  You can't port XP perfectly the way you did.   It usually requires a repair installation to fix the hardware abstraction layer. Colin Barnhorst

• Satellite A660 will not start again until I turn safe mode

  Just buy the toshiba Satellite A660: I tell the story to compensate closely in my answer, I hope...

  I just buy new, run the Setup for first use. When its up and running only in that day, that I noticed it start to hang up when I plugged the drive external hard for some Installer (adobe lightroom).

  Its still very well, but when I disable it, it does not start again until I have run in safe mode so I can save some files and rerun recovery.

  This time on 64-bit. With its completion of its process, this works well for a few hours.
  He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...

  Now when I turn it off it never early return time windows say... Startup Repair. ..
  I have let it run from this morning till now they can't always find what's the problem (I'm refernce the loptop).

  So no idea about whats goin?

  > He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...

  64-bit operating system is better if your computer supports 4 GB or more of RAM.
  Why? Because 32-bit Win recognizes max 3.2 GB, even if more RAM is available.
  It's limitation of 32-bit; regardless of what OS it is; Linux, Win XP, Vista, Win7, etc.
  This is the reason why the 64 bit OS are so popular in the last time

  With regard to the issue of the BONE;
  I recommend that you run a disk recovery again... This means that you need to reinstall the OS usign the option recovery Toshiba;
  During the turning on the laptop press F8, choose fix my computer-> drive HARD recovery

• I can't get out of safe mode when starting, and can not run the Setup program from windows XP in safe mode.

  I have a XP box that would only start in safe mode.  I needed to repair windows, so I started updating reinstall option but to reboot it says it cannot run in safe mode then it tries to boot into normal mode but crashes - which is what I am tring to solve.  Now I'm stuck because the computer is now making a loop and I'm stuck.  There is no available recovery console, it shows just the installation restart then goes into the shot.  If I try to launch safe mode, that it says cannot run update in safe mode then restarts in normal mode, which hangs then.  I'm stuck.  Boy the days where I wish I could just make the prompt C:\.  Thank you.

  You can connect your problematic hard drive to another PC to copy your important data, using a device such as:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002

  or

  http://www.Newegg.com/product/product.aspx?item=N82E16812119244

  I'm still not 100% convinced that you boot from the CD. Your Dell has the option of F12 to select a boot real-time device (as soon as you turn on the PC)? Also, remember that you have to "press any key to boot from the CD" when you see this screen! Of course, during a reboot, you start from the hard drive.

  Even if you did everything by the book, a repair installation could easily 'loop' as you describe. But as long as your hardware is healthy, a clean install is done.

• Windows 7 Build 7600 this copy of Windows is not genuine - I can only run the computer in safe mode

  My son - under Windows 7 Home Premium - Dec 2010 laptop, purchased at Future Shop

  It has worked well for the past 2 years.  Suddenly, on Saturday, he stopped doing anything.
  That's happened?
  I don't know, but when I started upwards, normally, all I get is the 'black screen of death", with the words"Windows 7 Build 7600 this copy of Windows is not genuine ".
  I CAN'T DO anything HERE - can't make a right click, left click, CTRL ALT DEL, menu button - nothing works

  So I rebooted in SafeMode with networking - everything works fine.

  I have tried many fixes - when I read the topics - but NONE OF THEIR WORK in safe MODE
  slui.exe 4?  Does not work in safe mode
  Run?  Does not work in safe mode
  Start - computer - properties - activate windows now?  Does not come to the top, in safe mode
  However, he won't come to the top with a status or product ID
  Starter - activate windows?  does not work in safe mode
  I tried to download the windows / microsoft / genuine / validate the tool - but guess what, that didn't work either - update installation failed - error information 0x8007043C - probably does not work in safe mode - but that's all I have As
  I did a system restore - it 'worked' but ran very slow - and then when I restarted, the problem came back.
  and many others

  I ran Avast free on it - and anti-octets Malware - nothing - but I can only run in safe mode.
  Avast has some programs that run on the system re - start - but it does not start in normal mode - if none of them work

  I read a lot of topics on this - and I'm VERY FRUSTRATED

  I used another laptop - does the slui.exe 4 - and he asks me the activation key?  I can't that - not in safe mode
  I called the phone number - and talked to anyone - they told me to go through the www.howtotell.com - and report a counterfeit copy.  But it's NOT a COUNTERFEIT copy.
  OK - it's perhaps - but why it worked for 1.5 years?  And I bought from FutureShop, so should be reliable.  And I have the certificate of Authenticity on the back

  Don't forget - I can't do anything either in normal mode - but the Safemode with network works perfectly well.

  So, I don't know what to do.

  I don't think that's my problem - I bought a genuine copy, a reliable retailer.
  Anything you can do to help, would be greatly appreciated.

  I agree with this assessment.

  Hard drives come with a large number of spare sectors 'invisible' - it's only when they all well used by repair mechanisms built-in to the reader that the number of bad sectors Windows begins to increase from zero (in your case, it is a sector) means that there is already a significant degradation of the drive, and you can expect the count to start sooner or later back.

• I want to delete the e-mailaccount from my mother in law from my computer, my wife will take care in the future: How can I remove this computer from ny account?

  Today, I created an email account for my mother in law, 91. After he arranged on my computer I set up on my wife's computer. But by removing the account in my system Thinderbird seemed you impossible. What should I do for that account to go (not my wife!). Thanks for your advice. Frank van der Elst-Netherlands.

  Right-click on the account in the folders on the left side pane
  Select settings
  Make sure that the correct account is selected
  At the bottom of the folder pane's actions account
  Delete account is here.

  Be sure to move all messages from this account that you want to keep in a folder under local folders before you remove the account. All related messages that account, which does not move will disappear with the account.

• Blue screen of Windows XP, the computer continues to restart, can't get into safe mode, will blue screen with installation as disk, can enter the CMOS?

  Restart Windows xp continues and in the end, the blue screen of death leaves the following error: 0X0000007B (0XF78D2524, 0XC0000034, 0x00000000, 0x00000000) can anyone help?

  If your machine is blue-screening after booting from the XP installation disk, it suggests that your problem is with the hardware rather than auto-run.

  I recommend taking your machine to a local service shop, unless you are confident enough rooting in the bowels of your computer.

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Is there an external link to use to restore Windows XP Home to original values? I can only use safe mode at the moment that my computer shuts down automatically (with blue screen)

  Running Windows XP home SP3. eMachines T6528 AMD Athlon 64 3500 + processor, nvidia GeForce 6100 GPU
  I downloaded and executed a double file Finder and SEVERAL files deleted by mistake.

  According to these instructions, you are not supposed to do that! Look at them again. They are on p. 137 (or p. 145). (P. 137, printed on the bottom or the p. 145 of the .pdf file!)

  Remove all the drives and physically disconnect all USB and network connections first!

  Then either start as you normally would (if you can) and select:

  Start | All programs | System recovery | System recovery

  and then click Yes.

  Or if you are unable to start up as usual, you will need to press F11 at the beginning - almost immediately after the ignition of the PC.

  THEN, when you are prompted to, you can insert the disc. :-)

• Windows Vista 32 bit freezes at startup, as well as in safe mode and Windows RE

  Original title: serious problems with Windows Vista 32 bit

  Yesterday my computer worked fine. No problems. This morning I'm going to open a session and it is frozen, so I unplug the computer and restart it but after entering my password, it freezes again and he did it for the past 14 times. I have Ubuntu installed on my machine that I use now which works great, but I need to get Vista up and running by Saturday, because I need to Photoshop to work and other things. I need to sync my iPod on Windows as well.

  I did install updates or anything before this problem. He began by chance. I can't start without failure or recovery mode or networking like these gel too.

  Hi LiaCHIA,

  You get the error message?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps described in the article below, and then run the Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  If the problem persists,

  Step 3: Follow the steps described in the article below

  When you start a Windows Vista-based computer, the system may stop responding (hang) at a black screen

  http://support.Microsoft.com/kb/946532

  In addition, see the article below for custom installation (Windows. Old folder)

   

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  Note:  In a clean installation, existing data will be deleted. These data include settings and personal data. After installing the operating system, you must also reinstall all programs.

• Firefox does not open more than one window, only opens new tabs. Firefox does not open in safe mode.

  Firefox does not open more than one window at a time, and then opens only new tabs. When asked to open the link in a new window - nothing happens, no error message or the page appears. Otherwise, it works great, but no new firefox window cannot be opened menu or the mouse. I tried to reinstall firefox several times, which did not help.

  This has happened

  Each time Firefox opened

  Is 3-4 months ago

  There are some extensions that are causing a problem like that. See this:
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...