Re: Satellite P745: wirelees mouse stopped working

Similar Questions

• Satellite L850 - webcam suddenly stopped working

  The web cam on my Satellite L850 has suddenly stopped working.

  It does not appear in Device Manager;
  I downloaded the latest driver on the Toshiba site;
  I checked the BIOS and the web cam is turned on;
  Always when I open the web cam application I get the following message:

  "webcam initialization failed Please restart request and camera control.

  I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

  Tired of going round in circles and getting nowhere.

  Any suggestions?

  Post edited by: mrclean

  Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

  I also recommend the suite of this workaround:
  Uninstall the webcam software
  Uninstall the VAP
  Uninstall all software needed the webcam (Skype, etc...)
  Now, restart and install CCLeaner (cleaning of freeware software)
  Reboot once more.
  Run CCleaner and clean the system and the registry.
  Reset
  Now follow with installation of VAP
  Reset
  Install the webcam software
  Reset
  Test webcam.

  Good luck

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• The mouse stops working after a few minutes

  Original title: my USB mouse ch

  My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?

  Hi Ann Juel,

  1. what happens when you connect the USB mouse to the computer? You get the error message?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. What is the operating system installed on the computer?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can connect the mouse to another computer and check. Also perform the methods provided.

  Also, try a different USB port and check.

  Method 2:

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Response with status so that we can help you.

• Wireless mouse stop working

  my wireless mouse stop working.

  OT: device

  Hello

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?
  3. What is the brand and model of the mouse?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• My wireless mouse stop working

  My wireless mouse stop working... any suggestions? I put a new battery in it and it still does not work?

  Hi Glenna,

  Try a classic USB mouse to confirm that this isn't your system programs related to the mouse.

  Try using different USB ports in order to check that it is not a problem with that specific port.

  Try the mouse wireless on another computer to see if she's working.  That should help tell if the problem is with the mouse or with the computer.

  If it came with the software, firmware and drivers, try to reboot to see if that solves the problem.

  If she just started recently, try a system restore to a point in time before that the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.

  If the mouse doesn't work no matter what you try (on any computer), then chances are it is defective and must be replaced.  If it works on other computers, but not on this computer, then further efforts will be necessary to try to track down the problem.  If the above does not resolve the problem, after return with the results of what you have tried and what version of Windows are you using and the manufacturer, brand and model number accurate and complete of the wireless mouse.  Then this thread will probably be moved to where it should be (this is for feeback on the forums, the issues not techniques on mouse problems) and the people in this forum will also offer assistance.

  I hope this helps.

  Good luck!

• Mouse stopped working, to error '(32 Rudll) windows host process has stopped working ".

  My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?

  Hi Stevan I am,

   

  1. for how long have you been faced with this problem?

  2. did you of recent changes on the computer?
  3 do you mean the computer crashes when you get the error?

   

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

   

  Method 2:

  You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

   

  I hope this helps.

• Click on the mozilla firefox mouse stop working

  Click on the mozilla firefox mouse stop working

  http://forums.mozillazine.org/

• My mouse stops working after 30 minutes of inactivity. How can I fix this without having to reboot my PC?

  original title: MY MOUSE STOPS WORKING AFTER PC IS IDEAL for 30 minutes. How can I fix this without having to reboot my pc

  I hang the mouse up to the wrong computer

  Suggestions:

  1. If you use a wireless mouse, check the battery.

  2. use a different mouse and see if you have the same problem in the SAME conditions (idle for 30 minutes). If you have not, then your mouse may be defective.

• My usb mouse stopped working

  The problem is that my mouse usb (USB Microsoft IntelliMouse Explorer 3.0), has stopped working, the light is on but the cursor does not move it works when I restart my computer. I tried the other mice and after some time (can be 2 min, 1 h its random) the mouse stops working. I tried to use the other usb ports and it dosnt work, I tried the system restore, but the dates are after the onset of the problem. If anyone can help me, I would be grateful. And sry about my bad English, which is not my language.

  The only thing I found that worked the first time, every time (so far) is simply stop and UNPLUG your computer (for laptops... Disconnect the battery as well a few moments).

  With the machine on, the motherboard may still have activity.   This is what needs to be reset.

  Remove power, reboot and see if the mouse started working as you go through the screen "windows".

  Once logged on, it should pass the routine "found new hardware". This will solve the problem of "Unknown USB device" which is related to the mouse works do not.

  It could be useful!

  See you soon

• Keyboard and USB mouse stops working and kicking in and out.

  Hello

  I'm having a problem with my keyboard and USB mouse. Both at the same time stop working. Also, the mouse freezes every 10 seconds for 1 second (so boring). When the mouse stops working there is still of the red laser that is below normal. I am confused with that. I have all the latest drivers.
  Thanks for the help.

  Sys Specs: Windows 7 pro 64-bit, Intel DP67BG, HyperX 6 GB DDR3-1600 (3x2Go), Intel Core i7 - 2600K 3.4 GHz S1155, WD Caviar Black 1 TB 7200 rpm 3.5, EVGA GeForce GTX 470.

  Hello

  If you have a USB mouse wired and keyboard connected to your computer, and that they do not work properly, please check following things:

  1. Firstly, plug the USB into a different port on your computer. If they still do not work...

  2 try them on another computer! and if the problem is still there, it would be easy for you to just replace. But is not likely to result in the mouse and the keyboard does not at the same time!

  2 and if it's OK with another computer, which would be something wrong with your computer, and it could be from a hardware or software.

  Just see how it is done up to now.

• Satellite M60-132 - USB stops working until you restart

  My problem looks like this:

  All USB ports die after a few minutes (time may vary, but is shortened recently) after the start. They give no error - the USB mouse stops responding, the USB drive gives stops giving "delayed write failure" or sth like that. They are all visible and OK in device (Windows XP) Manager, no problem not being reported here. They have just stop working. I tried to reinstall Windows. It is not dependent on the OS actually. For example, I can boot from a live CD of SuSe Linux and ports will also die after a few minutes - they do on any OS tested.

  Now, I have discovered (GOOGLE usb ports stops working until the reboot) that several Satellite M60 users report this problem with their old cell phones. Exactly the same thing - ports die after a certain time of start and remain that way until you restart. In one case the user writes that he bought a cardbus PCMCIA USB controller and the problem continues - the ports of the controller when dying as well as embedded.

  My idea is to try even when the PCMCIA - maybe it will work in my case (another chip etc - you have never know). And anothr one must try to connect a USB hub to the Firewire port available. There are USB to Firewire Converter cards - could work like that?

  Anyone know any solution to my problem or have an opinion on my ideas? I am looking to buy a new laptop, which I can't really afford right now...

  Hello

  To be honest I've ever read on these problems on the Satellite M60, but it can happen from time to time, because it of also a fairly old laptop.

  My friend also uses a PCMCIA card that has USB ports on his old notebook. He is quite satisfied with this solution because it don t need to each time the USB ports. Just sometimes if he's copying files on USB.
  These cards are cheap, you can get it for a few s Euro and you can buy this card where you want, for example Amazon.co.uk.

  I never heard firewire to USB ports, which is new to me and I n t have experience with this.

  Welcome them

• PS/2 mouse stops working on Vista home Premium.

  OK, so I bought a computer, an HP with Vista Home Premium, and (despite all the horror stories, I got friends who use Vista) it worked like a charm. Things were a lot until one evening when my mouse (a three buttons not optical with scroll) has stopped working. It was as if he was not yet connected. I rebooted the computer and the mouse worked fine for a minute or two, then it dies again. I tried to check my computer to find errors and he found, and I have never recived any other error that the fact that I have automatic updates turned off, because I'm on the internet by satellite and I am limited to a certain amount of bandwidth. But back to my problem: I tried a USB mouse and it worked, but it made me even more problems. You see, I have set up wireless network, and I use a wireless USB adapter. However, when I started using the USB mouse, it has messed up my network connection. The computer wouldn't connect to the network, even if I wasgiving it the password correct and everything. I tried another card, and same problem, it always says that the password is wrong, and it would not attempt to open a session on the network, comes immediately coming with the error message. Well, after some time of dinking autour with her, I did finally find the mouse by lightning to work. However, now it is down again. I'm sick and tired of having to borrow the mouse USB of my friend, WTF I do? And please don't tell me to buy something, because I'm here to solve a problem, for not giving Microsoft (or someone else) more of my hard earned money.

  Hi Roadkill1992,

  Thank you for your message.

  You may want to refrain from downloading pirated software.

  Any number of bad things can happen to this activity.

  If it does not work on other computers, but not yours, I think you're right about the driver.

  You can also try a different PS/2 mouse into this port on your computer to see if it is a failure.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M50A - ELAN touchpad stopped working - again!

  Do not forget this recent thread?

  https://Forum.Toshiba.EU/showthread...topped-working

  Well guess what that my mouse and touch pad stopped working again today, this time during a Windows Update (and not after) - and guess what... the 'momentum - other hardware - MOMENTUM Input Device"was one of the updates, as well as the last time.

  The good news, for me, anyway, is that this time the problem was temporary. After forcing a restart by a long press on the power button, mouse and touchpad has been restored after finishing installing updates.

  EDIT - just to say that my touchpad customizations for example reverse scroll direction, 3 finger tap to start the browser etc were all lost. Not much, just a nuisance

  And as a follow-up, after you change the registry to restore the functionality to launch my favorite browser with a finger 3 press on (see another thread for reason of why I had to use regedit) I've had intermittent results.

  Now, I realized that the 3 finger 'press' feature seems to have disappeared to be replaced by a '3 fingers' touch. It is not documented that I can see, the registry key names remained the same, but pressing done nothing at all works a 3 persistent finger touch.

• Satellite C50 - keyboard mouse not working not

  The keyboard mouse touchpad has stopped working and I can't find a way through Control Panel to fix it. The external mouse through the wireless works fine, but I can't use the keyboard mouse at all.

  Go to the Settings Manager to your Toshiba, by clicking on the Start button in the lower right corner, click the arrow on the down in the lower right and then look for a program called system listed among Toshiba services settings. Go to keyboard and see if you can change all the settings it will allow you to turn the keyboard on or off. If none is listed, then go to your BIOS manually and see if it allows you to toggle the keyboard. Your numlock and capslock has a light on them to indicate that they are on?

  EDIT: I also found this when you browse the forum, it may help.

  Press CTRL ALT SHIFT to get your process to come. Find the Touchpad "enhancer" process. Complete the process. Your touchpad works until the next reboot, how simply repeat this step.
  If you're struggling complete the process without being able to use your touchpad, I discovered a curious thing. If you hold a mouse click, you can move the arrow of the mouse with the touchpad very well. Its a bit... awkward... but all you have to do that is to end this process and after that, you can use the trackpad normally.