Windows XP SP3 - windows firewall is blocking the download of the file cab HP

Similar Questions

• How to use the windows firewall, to block the software on my computer to access internet

  When my computer is connected to the internet, other software installed on my computer connect to the internet without my knowledge. I want to stop this and want windows firewall to ask me whenever a program tries to connect to the internet. Please help me

  It will take some serious reading on your part.

  You can configure the Vista Firewall to be a two-way firewall; and it's very good.

  Read all the info in the link below:

  http://articles.TechRepublic.com.com/5100-10878_11-6098592.html

  At first glance, the Vista firewall seems to be identical to the Windows Firewall in Windows XP SP 2. But once you learn the secret to access its configuration settings advanced through the MMC snap-in, you will be able to configure and customize outbound and inbound rules to adapt to your specific needs.

  See you soon.
  Mick Murphy - Microsoft partner

• While on internet, set Windows Firewall to 'block all '.

  Original title: Firewall Windows 'block all '.

  With the help of windows Firewall in Win7.

  Is there a way to easily set the firewall to 'Block All' (comings and goings) activity while I'm connected to the internet.

  I'm used to the use of 3rd party firewall and some have the choice of check "block all activity" on a right click of the icon 'taskbar '.

  I will use if go to leave the PC while on the net for more then a few seconds.

  I ask because firewalls 3rd party having this option does not work well with windows7.

  I don't want a process such as the control panel / advanced settings/unnecessary procedures / make / do that / go away/come back / freeze the system.

  Then having to do it all again in reverse to be reconnected.

  A simple one click / two click process that works.

  Anyone?

  Hello

  Thank you to provide us with an opportunity to help Microsoft Community, we are happy to help you.

  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  If you want to block all connections using the Windows Firewall, please follow the steps mentioned below.

  1. Open the start menu.
  2. In the search box, search for "Windows Firewall".
  3. In the search results, select "Firewall with Advanced Security Windows".
  4. In the 'Présentation' section, check to see which profile is active. By default, it should 'private profile '.
  5. Click on the link marked "Windows Firewall properties.
  6. Select the tab 'private profile '.
  7. Make sure that "Firewall State" is set to "on (recommended)."
  8. Under "Incoming connections" click the menu drop down and select "Block all connections."
  9. Under "Outbound connections" click the menu drop down and select "block".
  10. Next to "Protected network connections", click on the button "Customize".
  11. Make sure all of the checkboxes are marked, especially 'Connection to the Local network' and 'Wireless network connection' (as appropriate).
  12. Click on the OK"" button. Closing this dialog box, click on the 'OK' button on the next dialog box.

  For more information, please see the link below.

  Windows Firewall with Advanced Security Properties Page

  Hope that the information provided is useful. Keep us updated on the State of the question, so that we can help you further.

• Windows Firewall is blocking a program

  For some reason, the windows firewall does not do what I wanted to do. I blocked a dozen other programs before you access internet with good success using WF... except for this program a... little matter how much I try to configure the firewall, it seems are starting to show more of bugs and defects... so I have this free software that still has access to the internet and displays this annoying window with a large number of ads... (it's not malware because I scanned with malwarebytes... nor do I have a virus because I have avira and windows defender, fully implemented to update and regularly scans my pc..) So I disabled the program in Windows firewall so that she would not access the internet... but after running that software I can still see a connection being "established" by using tcp view... then I went t advance settings to create a firewall to block the program directly... in and out... but after reboot and rule control tcp view... sound still there... the connection is still established and bytes are packets or bytes are sent and received... so I check the firewall... in the window 'allow a program or feature through Windows Firewall' and saw that the program was unchecked... when I see it advance option... it clearly says its governed blocked and the rule is enabled.  So I went back to the "allow a program or feature through Windows Firewall" and not the program but when I went back to the ahead option my blocking rule found himself distraught... Is it really normal for the Windows Firewall to act like that? Is this a bug that when I disable something in advance options in that it ends up getting enabled "allow a program or feature through Windows Firewall?

  Hello

  -What is the name of the application that attempts to connect to the internet?

  Looks like an adware to me, try the following steps:

   

  Completely remove the firewall:

  To remove all files and registry entries related to the firewall on your computer, perform the following steps:

  (1) on Start > run type cmd and press enter to open the command prompt window.
  (2) in the command prompt window, run the following command:

  SC delete SharedAccess

  Running this command removes all files and registry entries related to the firewall service on your computer and allows you to completely remove the firewall on your computer.

  Now to reinstall Windows Firewall:

  Run one after another exactly the following commands at the command prompt.

  (1) rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf

  (2) netsh firewall reset

  Check that all the firewall services are enabled.

  Also try to run the virus scan using the Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know the status of the issue.

• Windows Firewall is not the default firewall

  Windows Firewall is not the deafult firewall, how do I turn on the firewall and how do I put as firewall deafult

  You must uninstall any other firewall program that you installed, and then the Windows Firewall could be enabled and set as the default firewall. You can't have more than one running at a time, then if you install another firewall (usually as part of a packaging such as McAfee or Norton or similair "Internet Shield" product) the Windows Firewall is disabled.

  "maryagosto" wrote in the new message: * e-mail address is removed from the privacy... *

  Windows Firewall is not the deafult firewall, how do I turn on the firewall and how do I put as firewall deafult

• of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

  After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

  What I would do.  I was grinding a lot and nothing has worked so far.

  Stone

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years?

• I can't access firefox, everytime I try I get that windows does not find the file, I tried it redownloading but he still gave me the same message?

  I can't access firefox, everytime I try I get that windows does not find the file, I tried to download again, but he still gave me the same message. the problem has nothing to do with my internet because it freaks on the internet explore and everythign is fine, just my computer can not access firefox for some reason any. I tried uninstallign it and then install again, but that did not work, I tried to install a different version and it still doesn't work.

  yesterday

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; MSDigitalLocker; FunWebProducts; GTB6; .NET CLR 2.0.50727; InfoPath.2; .NET CLR 1.1.4322; OfficeLiveConnector.1.3; OfficeLivePatch.0.0 .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  I'm sorry, but you have not answered my questions.

  (1) on the last stage Setup lets you start Firefox, if you keep all of the checkbox "Launch Firefox now", turns on Firefox when you click on "Finish"?

  (2) how did you launch Firefox when you receive the error message? How do you 'by clicking on the freshly installed target Firefox.exe?

  (3) what is the exact error message? (Post a screenshot if you cannot re-type precisely). Text you have posted it lacks an ending quotation mark and does not resemble any message I know.

• Downloaded 4 fonts on my computer and all the files unpacked, but says I have to wait until Windows is finished with the files

  I downloaded 4 fonts on my computer and all of the decompressed files. However, my computer telling me I have to wait until Windows is finished with the files. I made sure all Windows programs are disabled, but he still repeats the message. Why is it so?

  Hi Clarissa Tan.

  1. What is the complete message you receive?
  2. Which site did you download the fonts on the computer?

  Method 1

  I suggest you to use the link below to download new fonts on the computer and check if it helps.

  To add a new font to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fonts_addnew.mspx?mfr=true

  Download new fonts

  http://www.Microsoft.com/typography/fonts/

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you set up the computer in a clean boot state and try to install new fonts, check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• You received the C00D1199 error message using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  "You have received an error C00D1199 message while using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  The file audio im trying to open, a conference for a class I'm taking. Is there anyway that I can get the audio to play? program in windows media, itunes, quicktime player?

  Hello

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  Note: This link implies also on Windows vista.

• Use them command 'properties' in Windows Explorer to open the file

  I get this error where, when I start Photoshop, I get a popup saying "can't load Photoshop because the file is locked or you do not have the necessary privileges...." "Use them command 'properties' in Windows Explorer to open the file. I have unlocked access to everyone for the 64-bit and 32-bit version still does not work. The only way to make it work is by going to Program Files > Adobe > Adobe Photoshop CS5 (64 bit) and manually start as administrator.

  Everything was working fine until today. Help, please!

  If it worked before, and you have made any hardware or software changes, you can reset the preferences.

  Start photoshop and hold IMMEDIATELY the Alt, Ctrl + Shift keys.  It is a little awkward, but keep trying until you get a window to reset.

• AVG2015 keeps blocking the file prefs.js because of "potentially be OSX/tap.

  Well, you saw the title.

  Simply, this started happening yesterday evening and I don't know why because it's never happened before. I'm sure this is a false positive, but I do not know how AVG who know.

  The prefs.js file is located in the "AppData/Roaming.

  When AVG blocks the file, it also auto generation of the other prevents it. I have to restart my computer for FireFox generate another prefs.js... which then gets blocked for the same reasons again.

  I don't know what to do at this point.

  I know that uninstalling and reinstalling FireFox are my last resort I have 7 years I don't want to lose data.

  Right now, I have FireFox in safe mode and still work as I left it (same bookmarks, same saved passwords, cookies do not affected, etc.). I can not just save preferences.

  I hope it's just one of those random adjustments that AVG has. Otherwise, this foreshadows a more serious problem and I hope really is not the case.

  Sorry for the delay. While it's important, I had other things to do.

  Well, it seems that it was a false positive. After a sweep of Advance SystemCare and a reboot, AVG simply ceased to block.

  I was about to publish a bunch of stuff that might help her figure this out, but now it's useless... However, after reviewing the history of detections of AVG, it turns out that this question of mine happened 2 months ago. I honestly forgot on this subject, and how I solved it, if I had nothing. I probably did the same thing I did to solve it.

  So, it was a case of AVG returning a false positive. I feel much better now...

  Sorry to waste your time.

  ADDENDUM: I don't know whether to mark it as resolved. For now, I'll leave it as is, if it's OK.

• The manager wants to block the file history. How can I block the storage of files

  The manager wants to block the file history. How can I block the storage of files

  Hi Jaeyoung,

  Please see the following article on network end Points for creative cloud.

  https://helpx.Adobe.com/content/dam/help/attachments/Creative_Cloud_for_enterprise_Service _Endpoints.pdf? wcmmode = disabled

  It has information about what how can you block applications and different services.

  I hope this helps.

  Kind regards

  Sumit Singh

• Loading magic jack I get an error: Windows Firewall has blocked some features of this program.

  Windows security alert...

  I installed MajicJack phone on the computer and created an Exception for MJ in the Windows Firewall Exceptions tab. However, when MJ loading an error message says that firewall Windows has blocked some features of this program. The message does not give me an option to unlock. What should I do as I already created an exception?

  Hello

  1. are you referring to the Windows Firewall or any other firewall?

  2 have you made changes on the computer before this problem?

  3. facing this problem with taking magic or any other application?

  I suggest you try the following steps.

  Step 1:

  If you use Windows Firewall, disable the firewall and check the status of the issue.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions? http://support.Microsoft.com/kb/283673

  Note: make sure that you enable the antivirus software, other security and firewall programs.
  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  Step 2:

  If the application works fine after disabling the firewall, turn on the firewall and check the status of the issue.

  If the problem persists, please check the Event Viewer logs and respond with more information to help you better.

  How to view and manage event logs in Event Viewer in Windows XP http://support.microsoft.com/kb/308427

• How can I stop my Windows Firewall to block my printer

  My HP5610 all-in - one printer has decided to print surprisingly s-l-o-w. I went in solutions of HP printer and ran their diagnosis and they said everything-is-good. I went further in help to try to disable the windows firewall and then worked the printer. I have Trend Micro and called them and they said that it is the problem of the windows firewall. I just got the latest version of the HP firewall just before it happened. Now what should I do to solve the problem?

  Open ports in the firewall that uses the printer. I've listed the ports to open below. Who should get things rolling right. Let me know what happens.

  HP printer ports
  Definition of acronym TCP UDP used to
  137 137 NetBIOS network Basic Input/Output System - (basic communication) UDP: printing, Photo card download
  138 NetBIOS network Basic Input/Output System - (basic communication) UDP: Photo card download
  139 NetBIOS network Basic Input/Output System - (basic communication) TCP: PhotoCard download
  Simple Network Management Protocol SNMP 161 - devices connected to the network of monitoring UDP: print
  427 427 UDP SLP Service Location Protocol (know what things can do on the network): print, download Photo, scanning, fax, facility maps
  9100 PDL page description language - print control language (how the printed page look) TCP: print
  9220 TCP: scanning, fax
  9500 TCP: scanning

• Windows Firewall is blocking my FTP?

  I have problems of access to a Web site for File Transfer Protocol (FTP on my computer. It is a network that is used to transfer files from one host to another. I desperately need to use it for changes on my manual to send to my editor. It was working fine until about a month earlier, when all of a sudden I was getting a weird message when I logged in as if by chance, an icon for a Windows Firewall on my computer and I wonder if that is the cause of the problem. I have Norton anti-virus and everyone that I talked to said that I don't need the Windows Firewall. I hope that if I uninstall it, the problem will go away, but when I go to the list of programs in my computer it isn't here! (Isn't that weird?)

  The message I get when I try to log into my FTP is a FTP root with the number.   Can anyone offer any suggestions for me?  Thank you!

  Hello

  Windows 7 all use them the "Application Layer Gateway Service" as an assistant to Active FTP connection. You must make sure that this service is started for Active FTP to work.

  To start:

  a. click the Windows Start button.

  b. Type "services.msc" in the search bar, then press Enter (the Windows Services Panel will pop up).

  c. scroll until you find the "Application Layer Gateway Service".

  d. look at the "Status" column, it should say 'start '.

  e. If not started, double-click on the name of the service to enter its Options Panel.

  f. change the 'Statup Type' drop down to say "automatic".

  g. click the button 'Start '.

  h. click on 'apply '.

  i. click "OK".

  In addition, you cannot uninstall Windows Firewall because it is integrated with Windows 7. Only, you can disable the Windows Firewall.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: You should not turn off Windows Firewall unless you have another firewall enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.