Windows XP used... TV being used as an external monitor receives a signal from the laptop, but displays no office or something more
My Samsung DLP is connected to my laptop and it shows the logo of the computer but I can't get anything else, such as the desktop... any help would be appreciated
Hi jayvee53,
1. don't you make changes before the show?
We recommend that you adjust the size of the screen in digital and analog Mode in Windows (resolution setting)
If the image is too large or too small, very probably, you must set your computer to optimal resolution screen and/or the optimal frequency (vertical frequency) to your TV.
Step 1: To set the optimal resolution, follow these steps:
a. Click Start > settings > Control Panel.
(b) in the Control Panel window, double-click display. Display of the dialog box is displayed.
c. click on the settings tab in the display dialog box. The settings dialog box is displayed.
d. in the screen resolution section, move the cursor to the optimal resolution for your TV and then click OK.
e. in most of the cases, the screen goes out for a moment or two and then re - appears in the new resolution, display a dialog box asking if you want to keep the new setting.
f. click Yes.
Important: The Optimum resolution for your LCD TV should be included in the section display PC of your manual.
Step 2: To set the optimal refresh rate, follow these steps:
a. Click Start > settings > Control Panel.
(b) in the Control Panel window, double-click display. Display of the dialog box is displayed.
c. click on the settings tab in the display dialog box. The settings dialog box is displayed.
d. click the Advanced Options button at the bottom right of the dialog box.
e. in the dialog box that appears, click the monitor tab.
f. on the tab monitor in the monitor settings box, click screen refresh fall down, then 60 Hertz.
g. click OK.
Note: We recommend that you also download and install the latest video card driver on your computer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
I would remove ALL of my laptop which is running vista Sp2 and I have not a disk to install it from what can do?
Hello
Here are the different ways to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
____________________________________________________________
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
__________________________________________________________
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
____________________________________________________________
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
We monitor windows servers using pdh.dll and we receive "error PDH 0xc0000bc6:9-> the data is invalid" a few times. Need to understand what causes this and how to fix the same.
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads
Hope this information helps.
-
I have Lightroom and Photoshop CC on an imac and windows laptop PC. I've now bought another mac and want to use the laptop to windows. I need to remove the applications from the laptop first, then download new mac?
Hello
Lol you should not remove it. You can turn it off with the signing of the application Adobe CC.
Reference: connect and disconnect activate Cloud Creative applications
And then you can install it on your other machine.
Kind regards
Sheena
-
. Video streaming
I can stream movies on my PC using the desktop PC monitor. But when I unplug the monitor and use a PC to TV HDMI cable I get the video but the audio now... Suggestions?Thanks for the file INF. I ck'ed for driver updates and I have the latest drivers installed. I got the sound working on the TV by hanging the audio output of the PC to the entrance of the TV with the HDMI cable in place for video. It's the simplest solution to this problem, so I took it.
By the way, I have a Dell 620 with windows 7. -
try to use my modem to broadband cricket to get on the line, but something seems to be block it
Hello
My name is Danny on behalf of Cricket Wireless.Please go to your full service nearest Store of Cricket or call the customer care of Cricket broadband at 1-800-CRICKET.
Prior to contact our Customer Service team, make sure you have the following information:
-An operating system (e.g., Windows XP)
-Number of device Modem Wireless cricket (DND) assigned to your wireless modem. To find your MDN, please use the following steps:
- Insert the device into the USB port of your computer
- Open Cricket Broadband Connection Manager
- Go to help > about, your phone number is listed as your DND
Thank youDanny on behalf of Cricket Wireless -
Hello.. I'm from the programming, but new to actionscript. I would like to ask if there was a library where all built in functions, methods, and events can be searched. As for VB, MSDN (of Microsoft Developer Network) used to be there. More than once it happens that I write a few lines of code, but a built-in function already exists for the same thing. Is there a way to check it out ahead of time?
An online resource are QAnywhere® to Adobe ActionScript 3 (AS3)
-
I don't have internet connection, so can I use offline adobe indesign, photoshop? and what is the product adobe cos cs6 is not available more...
CS6 products are always available through Adobe:
Buy CS6:
---------------------- -
Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail. I tried to clear the cache and restart Firefox, but I still cannot use Hotmail.
Not this problem when I go to Internet Explorer.
Hello, it was noted that the foxit pdf plugin is causing this issue. You can disable this plugin in firefox > addons > plugin until what foxit offers a patch/update for the plugin.
-
I need to reinstall xp on my nx6125
I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker
Hello
Yes, you can use this COST to install Windows XP. However, you must have Windows XP.If you face any problem regarding the installation of Windows XP.You can contact our Windows activation service.Here is the link: -
I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?
Hello
1. at what stage of the installation, the computer crashes?
2. what operating system was installed on your computer prior to this?
If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:
Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase
Windows XP does not meet the Message "Setup starts Windows XP"
Hope the helps of information.
-
OfficeJet 6000 computer connected to windows 7. Unable to print from the laptop Windows XP
Printer connected by USB to the Windows 7 desktop. Printing is fine. I have two computers on the same network of working group, file sharing is allowed. My laptop detects the printer on the network, but there is apparently a driver problem. The disc supplied with the printer will only install on XP and Vista, so downloaded the drivers for the new office of windows 7. I either get a message "Failed to print" or "the handle is invalid." When I tried to connect to the printer via the network of sharing and tried to open it, I was told that the wrong drivers were located on the server. He had the air of a file with *. INF. Do I have the wrong drivers on the desktop or do I need to install the drivers on the laptop? I never had this problem with my old Vista desktop.
Hello. Finally, I was able to install additional drivers for XP on the server computer and can now print from the laptop. Thanks for the help!
-
I bought a laptop computer with non-genuine windows 7. I have the original windows xp product key pro, etc. from the bottom of the laptop, but I do not have the windows xp pro cd. Help me, please!
You will need to either buy a version authentic retail Windows XP, with its key sales, to a true scource or visit the site of laptop manufacturers, support for your model and see what versions of win are taken care of, then buy a commercial version of this o/s.
The key on the base of the laptop is the recovery key that requires that the recovery disks provided by the manufacturer.
You could phone manufacturers to support to see if they have the origonal recovery cd send you, for which it maybe a small fee.
-
I got a message saying my windows would be disabled within 30 days I seem to have a copy of Tin. Not possible that I bought my laptop with windows 7 already installed. I really don't know what to do as the activation code is almost worn out. Why after two years this happened? Please can someone help me? Thank you. Kathy.
To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the button continue, after a short time, continue button will change to a copy button.
Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message. (please do not change the report.)
Please indicate the version and edition of windows from your COA. do not specify the product key from the COA.
-
I want to use the digital books in the library. When I try to use the link below to get the media player update security, as soon as I got to the page, I get a a get several times the same error - Internet Explorer has encountered a problem and must be closed and the page goes dead. Explorer trys to regen of the page, but it keeps getting an error. What should I do now?
You can download the upgrade of Windows Media Play Security 2.5.0.1 under the following link.
The security component upgrade
http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.aspHello
Follow the steps below and check, if it helps:
1 reset the management of digital rights (DRM):
a. Click Start, click Run, type explorer.exe and then click OK.
b. on the Tools menu, click on Folder Options and then click the view tab.
(c) in the area of advanced settings, under hidden files and folders, click Show hidden files and folders.
d. clear the skin protected operating system files check box and then click OK.
e. Locate the DRM folder on the hard drive. The DRM folder is usually located at the following location: C:\Documents and Settings\All Users\DRM Windows
f. rename the folder to DRMbackup DRM.
2 remove the DRM registry key:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
a. close all open Windows Explorer Windows.
b. Click Start and then click Run.
(c) in the Open box, type regedit and then click OK.
d. look for, and then click the following registry subkey:
e. HKEY_LOCAL_MACHINE\Software\Microsoft\DRM
f. remove the key and restart the computer
Maybe you are looking for
-
How can I delete a site listed in the bookmarks on my android phone
I know how to add favorites on android, but I can't find a site to delete. How can I delete a site in my bookmarks list?
-
Satellite A200/W00 - fingerprint is not recognized by the software reader
Hello. I'm running a laptop Toshiba Satellite A200/W00 (PSAF6A-0W00IN), and I recently installed my brand new Windows 7 Professional that I just bought. I found drivers for Windows 7 for my laptop on site and installed the Protector Suite QL 5.8.0.40
-
TestStand and Gateway requirements
Hello It is more a question of RG, but there is no RG area to post. I have a Word Document that defines the requirements for a test sequence. Needs are covered by the two (1) LabVIEW VI (2) sequence TestStand. What I want to do is to see what is my c
-
Router EA4500 do not open ports even in the demilitarized zone
I have a router EA4500 running the following firmware: http://puu.sh/4l2Hb.jpg I wish to convey the following ports to host a game server: http://puu.sh/4l2Jb.png In case you're wondering peripheral ip # is correct and my computer has a static ip add
-
I went to get online this morning and I see that my router has all the lights at the same time except the wireless. I have nothing plugged on 2 ports so why the lights would be on? I tried to power down, but it won't. My router is fried? The ligh