Windows XP32bit SP2 cannot install SP3 beyond the point of restoration

Similar Questions

• A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  Hello

   
  You are able to install other updates successfully?
   
  See the methods mentioned below and check if that helps.
   
  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/310353

  Note: After completing the troubleshooting steps in the clean boot, follow steps to configure Windows to a Normal startup State of the link section to return the computer to a Normal startup mode.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058
  Method 4:
   
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
  Hope this information helps.

• My Windows XP Professional cannot update SP3 because of lack of PRO11. Or the MSI files and I have the original MS Office 2003 CD to locate its files. Help, please.

  My Windows XP Professional cannot update SP3 because of lack of PRO11. Or the MSI files and I have the original MS Office 2003 CD to locate its files.  Help, please.

  Hello

  1. when exactly you get this error message? While trying to install service pack 3 or while trying to install a windows update?
  2. What is the full and exact error message?

  Please answer these questions and tell us more about the issue, it could help us help you better.

  See the bottom of the articles that might help you.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

• Cannot install and update the apps store of windows 8

  Cannot install and update the apps store of windows 8. When I click the button install is not install only loadin. Plese help me.

  After trying all suggestions from several sites, I found that the problem is that the Firewall window must be running in order for the applications to install.   If you are running Windows 8 Pro, go to the desktop and click on "My computer" and double click on 'manage '.  In the window on the left side computer management, expand "Services and Applications".   Click on 'Services', in the Center window, scroll down to "Windows Firewall" right click on "Windows Firewall" and click "Properties".  If the Startup Type is "disabled", click to drop down and select "Automatic".  At this point, you can click on 'Start' under the service status.  Once the Windows Firewall is started, you should be able to start installing and or update your apps from the app store.

• I get a bootstrapper error and when I went in the lineage page that another user has been offered and checked the system requirements, it appears the installation of Player 10, although it offers Windows XP sp2 as an option in the download, the system

  I tried three times successively to download the Player 10 upgrade my system pushes me to and continue to get a "bootstrapper" error message interrupt the installation.
  I tried already the linked page suggested to another author of the question with the same problem and get a message that I have not found in the download process, about the system requirements.
  The download site in fact allows to select your Windows XP SP2 operating system, but on the page linked toubleshooting, system requirements do not support anything earlier than a Windows 2010 server.
  Is no upgrade to Adobe Reader available for Windows XP SP2 version 2002?

  The Windows operating system older Adobe Reader can still be downloaded is Windows XP SP3 or Windows XP SP2 (64-bit).

  The latest versions of reader for these are 10.1.10 or 11.0.08.

  You can try to install one of these versions of Reader for Windows XP SP2 (32 bit), but there is no guarantee that it will work.  Use Setup http://get.adobe.com/reader/enterprise/ offline

• WIFI disabled on windows vista and cannot wireless connect to the net

  WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

  All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

  In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

  Is there a way to FIX?

  http://support.Microsoft.com/kb/932520

  Read the above re ignore this error message.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Firewall settings cannot be displayed because the associated service is not running

  I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings.

  Can someone help me? I want to restart my windows firewall, which recentloy has stopped working.

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
  is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
  than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
  you are, of course, that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• Code 646, cannot install dates. The question of liciense agreement is not required.

  Code 646, cannot install dates. The question of liciense agreement is not required.

  Try this FixIt:
  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  Help, please.

  original title: MM not working,.

  Laughing out loud!

  I found the awnser!
  It was two things,
  I have a dell and in some sort when I returned to XP SoundMAX Digital 7 Starter was deleted,.
  Then I got the thing plugged into the wrong entrance!

• My Windows 7 PC cannot see themselves on the network.

  My Windows 7 PC cannot see themselves on the network. Under the heading network in Windows Explorer when I try to extend the C drive, I get an error message saying that Windows cannot access it. Also, I can't access this PC from a PC in 10 Windows on the same network - this error message indicates that Windows cannot communicate with the device or resource. It is available, but it is unresponsive to attempts to connect.

  I have tried turning the firewall off temporarily, but this makes no difference.

  Can access my PC Windows 7 Windows 10 PC and a laptop Windows 7 without any problem.

  Integrated network diagnostics do not come to the top with something useful.

  OT:

  Windows 7 networking

  Hello

  Thanks for posting your query in Microsoft Community.

  • Your computer is connected to the domain?

  There could be several reasons for this cause and to diagnose the problem, we can try the following steps and check.

  Step 1: Check if the network discovery is turned on.

  Please refer to: enable or disable network discovery

  Step 2: Check Event Viewer for detailed information on the problem. Consult the following links.

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Step 3: Search the computer browser service, if it is running.

  1. click on Start, type services.msc in the start search.

  2. search for the computer browser service.

  3. right click on the computer browser service and select Properties. Check if it is started.

  4. If it is stopped, select Start or restart. Make sure that the service is started and set as Automatic.

  5. click apply and OK, if you make any changes.

  Step 4: Temporarily try to disable the antivirus on the computer program and check if the problem persists. If you are able to connect, you may need to check for updates and firewall settings in the security software.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Disable the anti-virus software

  Step 5: Make sure that the name of the network working group is the same for all computers. Also try disabling some protected sharing and check for the issue.

  1. Open advanced sharing settings by clicking theStart button, thenControl Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2 click to expand the current network profile.

  3. by password protected sharing, click turn off password protected sharing, and then click save changes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, try to perform a SFC scan to see if it solves the problem. Read the following article.

  Use the System File Checker tool to repair missing or corrupted system files

  Also refer to:

  Networking of computers running different versions of Windows

  Why can't I connect to other computers?

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

  I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

  The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• Cannot install SP3 as it crashes even after recovering the computer by using a recovery disk

  I recently had an accident requiring that I reboot using my restore disk that were made when I first came to this computer. Since the restart, I can't access the updates from Microsoft Updates program. No error message, tells me that I can not connect. After several attempts, I think that the problem lies in the validation of the Windows program I use. I tried manually to run the validation program and to download security patches I've saved previous accidents. I show that SP2 is underway. I have a standalone download SP3, that when I upload in the system, crashes and burns. Back to the same thing, restart using the recovery disk. I realize for XP ends next month and its time to upgrade. But I would like to have this machine in working condition to use for other tasks.

  Original title: update XP

  You are a candidate for this patch before installing SP3...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=PV-60484-2

  .. you are if your PC is a HP Pavilion and Presario, Media Center and has an AMD processor.

  To find out if you have an AMD processor...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Your processor type is shown in the computer: section (see below)

  You can do a restore of the system in safe mode to get rid of the SP3...

  http://support.Microsoft.com/kb/306084/en-GB

  .. .or do another cover.

  Tricky

• CANNOT install sp3 in windows xp HELP.

  I can't install the sp3 for windows xp, when I try to install and reboot a black screen appears with, various messages to, starting in the last known configuration starting in the last known good configuration, start with network etc etc, I have to use the keyboard to select the choice 1 and then I have to do a system restore to get back into my computer. I ran my anti virus which is coming back clear, NO spyware or viruses. My computer is also very slow, I have NO music on the computer programs or anything that could make it go slowly. I don't really know what to do, I'm not very tech at all, make me more and more confused as to what to do appaert to throw our the window lol lol. Thank you VERY MUCH in advance for any help given11 Karen x

  Nanna leighlas,
  Please post with the information requested here: what to post in the Windows Update forum

  I would say you can try a different virus scanner (such as a scanner online) just to check that you don't have a problem with virus\malware.  Here are some links that can help with this:
  Get rid of malware 
  Can I clean an already infected computer?    
  Windows Live OneCare Safety Scanner Windows XP

  Then, you must perform a clean boot on your system and then try to install SP3.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.